ArcaSwiss Fliplock Tension Adjustment for Loose Plate
Vložit
- čas přidán 28. 08. 2024
- Is your new plate loose on your Arca-Swiss FlipLock head, even when its fully locked in? Try this!
If you've never had an issue with the fit of your plate, you may not have known about the small tensioner which can adjust the size of the gap where your plate locks in on your head. Watch the video above to see how to adjust this tensioner to fit your new plate!
For More Learning Resources : www.captureint...
To Browse Our Store : digitalback.co...
This video was exactly what I was looking for, thank you for sharing this info! I had the opposite issue where my compatible tripod plate wouldn't fit in my new Arca Swiss ballhead. Loosening this dial did the trick.
In your example at the end, the clamp is too tight. You have ton be able to hear the second click when you close the lever. it's can be dangerous if it doesn't close properly, because it could open to the first click. The perfect settings is when you can still move your gear slightly at the first closing click (when the lever is perpendicular to the clamp) and only with full closure of the clamp your gear has to not be able to move any more.
Totally right. You can even damage the mechanism.