How To: Replace Pool Pump Gaskets
Vložit
- čas přidán 27. 08. 2024
- Pool Pump Parts - bit.ly/30PhFj0
Magic Lube O-ring Lubricant - bit.ly/36nF6kG
How A Pool Pump Works HTG - bit.ly/37moYAZ
How To Prime a Pool Pump HTG - bit.ly/2RoDP8O
If you have a leak spraying out of the seal between the pool pump housing and the motor assembly, you probably need to replace the housing gasket between the two units. We recommend that when you pull the pool pump motor assembly to replace this gasket, you also replace the diffuser gasket within the motor assembly.
To view this guide step by step on our website, visit:
bit.ly/2sRjkbc
Thanks for the video! Any idea how much money I saved doing it myself?
You would save the cost of a service call which could be in the range of $75-$150.
....WHAT IS THE PART NAME OF THE V-SHAPED SWITCH THAT PROVIDES POWER TO THE CAPACITOR?
Do you have to empty the hot tub to take the pump out ? Will the water squirt everywhere?
If you don't have isolation valves, you'll need to drain the hot tub. Water will spray out if you don't have valves to shut off the flow of water.
Got it . Thank you!
i only see 4 housing bolts
Good catch. The script was written for a Hayward Super II, which has 6 bolts. However, they used a Super Pump. The general guidelines should still apply to most pumps.
If it still leaks, can I use a flange gasket, which goes between the two major parts coming together for bolting. Have a new Centurion B836 2Horsie and slightly leaking under (no more tightening).
If it's leaking between the seal plate and pump housing, you should replace the flange/housing gasket. If it's leaking between the motor and seal plate, the issue is the shaft seal.
got it, thank you for your help
This video would have been so much better without the annoying porn music in the background.
Zero reason for it.