Step-By-Step on cleaning your softener dispenser in your washing machine
Vložit
- čas přidán 20. 05. 2020
- Please LIKE, COMMENT and SUBSCRIBE!
~~~
Email me at danib.tv.yt@gmail.com
~~~
- DON’T CLICK THIS! - bit.ly/2CGAqxa
This video show you how to clean your softener dispenser in your washing machine.
You should clean, at least, the softener dispenser every 4-6 weeks.
My washing machine is a Samsung brand but this technique is good for most machines.
Products used:
- Baking Soda
- Wash Cloth
- Sponge on a Stick
- White Vinegar
- Scrubbing Brush
#washingmachine #softener #Softenerdispenser #deepclean #cleaning #beforeandafter #quarantine
I knew the part with the hole came out, but I didn’t know the little plastic stopper thing below that is removable, and it holds plenty of grime. You bet I’ll be removing that and scouring it right this minute!
Great video! Enjoyed watching without a lot of verbal filler. The pause and squeak in the middle was my favorite 😁
Appreciate it!
Wow!! Thanks for going right to the process 👍
Thank you!!!!!!! OMG!!!! I’m doing this right now as I’m watching. This will be part of my quarterly maintenance schedule. Thanks again for posting!!!
You’re very welcome. Happy to help!!!
I don't know how you did that without gloves. You're brave!
Haha. It’s just fabric softener. Gloves actually freak me out. I don’t know what’s in them haha.
@@DaniBTVsxm haha you have a good point!!
This was so satisfying to watch!
Thank you. That’s exactly what I thought.
Wow! Genius idea
Thank you so much! I tried everything to get the residual fabric softener off the drum and agitator but nothing worked. I just used your technique and it’s shiny and looks new again! You’re a genius!
Glad I could help 😊
Omg this really worked. Also used an all natural disinfectant spray by ever spring
Thank you so much for this video! We bought a house with a washer and dryer already in it and it was filthy... she looks like new now! Thanks again!
Glad I could help. Congrats on the new house!
My mom’s dispenser is a mess, will give this a go. Thanks!
Good tip thank you
Thank u so much for this vid! It helped me out a lot!
You’re very welcome. I’m glad my video helped out. Please let me know if there are any other videos you would like to see. I’m always open to suggestions and trying to find the easiest way to do things. 😊
Thank you 👍
You saved me! Thank you so much. Haha the squeaky clean sound you left in around the middle was cute. Hope i can do as good a job!
Just the video i needed
Thank you do much. I'll try it.
I just did ours 😮 I soaked it in Dawn dish detergent and scrubbed it 🎉
Omg thank YOU. We have the same washer.. I think! Short, to the point, no life story about how your great great grandfather invented the nuts and bolts to the first washing machine ever made. Thank you so much. Whoever had this washer before us was one nasty mofo. It looks a million times worse than yours and I couldn't figure out how to separate the pieces. God bless you woman! ♡
Happy I could help! Happy cleaning 🧼😊
Kimi crapped corn and she don’t care kimi crapped omg I’m laughing so loud, I’m liable to wake up my cranky kids but your handle made me think about how years ago when my husband and I would eat corn for dinner, inevitably he’d be singing those words an hour later, to the tune of “Jimmy cracked corn” kimi crapped corn and she don’t care
wow I forgot all about that. My goodness
I’m still laughing ok now I forgot what I was doing,
what was I gonna ask??
🤔 hmmm
Anyway
Never thought about one of those scrubbers for deep down. And the Q -tip👌
Thank you so much this was really helpful for me☺
You’re very welcome. I’m glad this helped you.
Omg thank you!
HI, nice presentation ! My dispenser doesn't take much softener liquid. I'm wondering if the "cap w/washer) part is dirty and won't let it go down much. I can put some in, and I try and put what the softener says, but not much goes in and it fills some to outside of the dispenser. OK, this is about as complicated as I want to go on a repair. lol. We'll see. Thank You !!!
Thanks for this video!!
My husband thinks I’m a genius for getting the little stopper think clean.
Haha. Feel free to take the credit.
Thank you!!!! Mine is so messed up it was caused stains on my clothes 🙏🏼🙏🏼 fast and to the point
Happy to help! 😀
Alright, this video is on point...just the one I need, thank you!
Thank you. I’m glad this helped 😊
Thank you so much!!!!!!😃😃😃😃 You saved me hundreds of $!!!!!!!! My washer looks like it was right off the Showroom Floor 💫💫💫💫💫
You’re welcome!! I’m glad my video helped !!!
Omg thank you!!!!
You’re welcome!!!
Yes mine was so dirty and I cleaned it my best
Thank you!!! Mine is disgusting and ive been trying to figure out how to clean it.
Happy I could help! Happy cleaning.
Just took my whole agitator out. It's only 1 bolt. You would be horrified how much grimy crud sits inside that thing where you can't see. I turned a whole sink of warm water almost black with grime and chunks washing it out.
Ew lol. Yeah. It can get real gross if it’s not cleaned.
Oh yeah it’s the grossest thing I have seen in a while. I bought mine new so it’s just 2 peoples grim crud and mold!!!! No wonder the clothes still smells scurvy when they come out and I even tried a curved scraper still couldn’t it cleaned. Taking it out this afternoon fabric softener buildup new machines aren’t worth the money no way
I would’ve loved you narrating what you’re doing. But video was good enough. Thank you.
Thanks for the tip.
Thank you for this. I have the same model and the manual doesn't even show these pieces. I knew how to get the top off but I can't get the flat piece off (the one that is covered in blue and has the rubber ring). In fact, I was convinced it didn't come off until seeing your video. I added hot water but of course it just drains into the tub. I tried scraping along the sides. I don't want to pull too hard for fear of breaking the tabs on the top. Do you have any tricks to loosen it up? I have pulled very hard but there is no give.
Ah, I saw later in the video that you used vinegar so I tried vinegar instead of hot water and it broke up the crud enough to loosen that piece. Thank you again!
You’re welcome. Glad my video helped.
@@suzannedorman8945 I tried vinegar and it still isn't loose enough for me to pull it out, any tips on how else to remove it
@@foluotun1306 All I can think of is to let the vinegar sit awhile. That's what I did and it still required some force - the vinegar loosened it enough to have "give" which I couldn't get before. Good luck!
@@suzannedorman8945 thanks, turns out for my model, it doesn't come off
I have the same brush, wish the bristles were stiffer
It’s a good brush 😊
When I had that model, I would just pull it off and toss it in with a load of cleaning rags or towels. Viola. Much easier always dilute your fabric softener.
That’s a great idea. Thanks
How do you get the second piece out mine won't come out is their a trick, you made it look so simple.
Are you talking about the small piece? It should just be basically floating in there. You should be able to just take it out. The big piece you would have a to tug a bit.
thank you for your reply but I found out that the dispenser was different from mine. and it doesn't come out
You’re very welcome. Please do me the honor and supporting my channel by also subscribing. If not that’s ok too. I appreciate you watching my video and I’m glad I could help. 😊
Yeah no all dispensers are the same.
So how did you remove that inner cap?
Mine will just pop right off.
Where did you get that brush you were cleaning with at 1:17 ?
Honestly I can’t remember. I’ve had it for a while. I’m sure you can find it at Walmart if you’re in the US. Or Amazon. if not, any sponge brush would do.
That plastic part on the inside won’t come out. I tried pouring hot water and everything. While my washer is draining.
You made it look so easy to remove the second part at 0:30, but I can't figure out how to remove it at all on mine.
That thing should just be floating inside there. You should just be able to pull it out after you take the top off.
Did u have mold in dispenser.
Not mold. It’s just old fabric softener. Water doesn’t go through this during the cycle so when the softener is released it leaves back some then it just kinda solidifies as stuff usually does. But it doesn’t get hard. It just gets thick. So the more and more you use it, the film gets thicker and that’s why it look gross. But it’s just fabric softener.
@@DaniBTVsxm I think that clue is going to fix my issue. The dispenser doesn't take much liquid. SOOO, I'm going to see how clean it is in there. lol
I'm going to have you clean mine. You're fast.
Haha. Yeah it’s a pretty quick process. But not washing machines are the same.
Did not know this was for softer dispenser 😩
Haha. Learn something new every day
I don't think mine comes off
Not all are the same. If you can’t take it off you can use a stick/brush on a stick to clean it.
great until that rubber washer breaks while cleaning and
handling... handle it gently.
This is one of the most disgusting yet lost satisfying thing I have ever seen. I literally just figured out how to do this.
I just pulled the entire agitator off and it was CAKED in nasty brown crud underneath all the way down to the floor of the washer tub!!! Wish I could show you a picture. 🤢
You painted a good picture 🤢 lol
geez, why wouldn't she use gloves?
It’s only fabric softener. It’s not that gross. I’m not eating it lol. And you wash your hands afterwards.