How to professionally deep clean Enagic LeveLuk (K8)
Vložit
- čas přidán 29. 08. 2024
- 🔥🔥🔥 It's finally here 🔥🔥🔥
A professional step by step video showing you how to deep clean you're Enagic LeveLuk K8 without voiding warranty.🚫
I created this video after I was educated on the proper way using the proper tools and mainly how the company does it. 👌
This amazing Japanese technology was created to last you over 25 years or more always operating at their Peak quality levels with the proper maintenance. ♻️
I hope this video added a lot of value.
Support the channel for future videos please comment like & subscribe God bless! 🙏
Website / Aquacharged.com
Here are the links.
K8- ID#7332413
www.enagic.com...
Pump -
aquacharged.co...
F8 Filter
www.enagic.com...
Enagic Citric acid -
www.enagic.com...
Citric acid - 5 Lbs
www.amazon.com...
Citric acid - 50 Lbs
www.amazon.com...
CLR -
www.amazon.com...
Pipe Cleaner -
www.amazon.com...
ORP -
www.ionfaucet....
PH drops -
www.enagic.com...
Chlorine drops-
www.enagic.com...
For any other ionizer accessories Ionfaucet is amazing there's the link-
www.ionfaucet....
I didn't clean my K8 machine for almost 2 years. Here's my results after following video.
START DATA:
2.5pH = +778mV
11.5pH = -226mV
9.5pH = -136mV
FINISH DATA
2.5pH = +1132mV (45% improvement)
11.5pH = -834mV (369% improvement)
9.5pH = -564mV (414% improvement)
NOTES:
- I used 1 cup citric acid & 1 cup CLR
- Ran pump 7 hours through input tube (normal)
- Ran pump 3 hours through the acid tube (reversed)
- Flushed ~55min then another 5 minutes with new filter
Thanks!
It is very satisfying for me to know that you are happy with the results, please let me know if you have any suggestions on what type of videos you want to see. Stay safe and God bless
And by the way if you let the 9.5 run for a little bit and make sure you run a slow rate and check again the orp levels again! let me know if it improves? 💯🙏
This Is Encouraging. I’ve Had My K8 For About Two Years And Haven’t Cleaned It. I Plan To Take These Steps Very Soon.
Thank You.
What are the specific reasons to REVERSE the process? Like you, I've never had it deep cleaned. I have all the equipment now, and am doing it today. Thanks!
Thank you for making this video. The knowledge that you gave me in this I am now going to start doing them because I was told to bring my machine in by the local Enagic sales people and they would have it done in three hours complete. problem is my machine was sitting for about five months i’m sure it has a lot of buildup. Following your instructions it should’ve taken a lot longer than that so I questioned it and I’m glad I did so I will buy a new pump and I will start doing it myself because you can’t trust people and it’s a shame. Thank you sir thank you so much
Hey Jim you’re so welcome I’m glad you got some value out of the video that was the purpose and the reason why I made that video for all my Nager family have the best experience!!!
Here is a link to the pump.
aquacharged.com/store/aqua-clean-machine-pro
I just got my own deep cleaner. I really appreciate your video 📹
Probably do the hose with the pipe cleaner before the flush 😊 thanks for the video
Thanks a lot for perfect knowledge k8 Kangan water machine deep cleaning cleaning ❤❤
Very good video nice editing and thanks for helping me understand the process of deep cleaning the machine 👍
Thank you so much I'm glad it got the point across that's my mission and purpose is to give people a clear understanding on how the deep cleaning work... stay tuned for more cool videos and thank you for the support once again!
@@mehdicohen always with supporting, & ill be on the lookout for new stuff! 😁
Very well explained. Thank you so much Mehdi
Thanks so much for making this video! I used to use a fish pump to do a similar process but glad you mentioned the benefits of a professional grade pump. Just purchased one from the ionfaucet link you shared. I have a K8 which I haven't cleaned in well over a year, maybe 2... really looking forward to giving her a proper deep clean, she's not hitting like she used to - very few bubbles at all and my orp meter measures 2.5 at +778mV, 11.5 at -226mV and 9.5 at -136mV. When I first measured 9.5 without first measuring the 2.5 followed by 11.5, my 9.5 was struggling to even make a negative ORP (was measuring +21mV and very slowly declining). This is probably a worst case scenario to be in for a K8. I will try your method to a T and report back the improvements as a testimony for you 👍 thanks again! Only reservation is i'm a little nervous about using CLR, seems like it could be a health risk - I do have soft water, but given how bad my machine is right now im planning on using it. How comfortable are you with the CLR from health/safety perspective? Thanks again for making a great video!! GOD BLESS!!! 🙏🏼❤🙏🏼
I'm apart of a facebook community through our distributors upline and did some reading today - it seems there are some legitimate concerns with using CLR.
From the MSDS for the CLR product:
INGESTION: Oral burns, vomiting, and gastrointestinal disturbance.
SKIN CONTACT: Prolonged contact may cause dermatitis, and itching.
INHALATION: Irritation, breathing difficulties, headaches, dizziness.
EYE CONTACT: Irritation and blurred vision. Effects may vary depending on length of exposure, solution
concentration, and first aid measures. Prolonged contact may cause permanent damage.
From what I've read on the Facebook group it seems that CLR is not only toxic, but it eats away at the plates and could also void warranty... are you sure this is how they perform the deep clean when sent into Enagic?
I’ve been also hesitant of using CLR, I have used vinegar instead of water tho.
Did you clean it? I have a k8 that hasn't been cleaned in 2 years.
Best video by far. Well done ❤
Thank you!!! So much great information here!!
That was the most informative and well edited video i have seen so far with regards to the kangen machine. You are a true expert at what you do!
Thank you for taking the time to create such amazing content you are a true credit to the enagic team and a great teacher!
I have one question if i may ask?
I have a K8 and i am gonna deep clean it for the first time (I have had it for 5 years) unfortunately i was completely unaware that you are suppose to do this procedure. But i do now thanks to you. The current MV is like -67 right now so God willing it should come out well i am leaving it for 10 hours i added citric acid and white vinegar i didnt have clr but our water is soft anyway.
However since i have had the machine from day one the ph on the 9.5 always reads 10.4 PH. I have reduced it on the settings and it came down to 10.4 from like 10.8!
I am hoping the deep clean will help. However i read in the comments where you said the chemicals in the water are raising the ph too high. I believe that may also be the case in Manchester UK where i am from.
Is there any solution to this issue? And will drinking this high PH be detrimental to the health in the long term do you think?
Thanks in advance, stay blessed 🙌
Hi. Thank you for showing us this process of cleaning Kangen 8. Our water is hard and the machine easily clogs. I just want to know where to get the pump and if you can specify the cost that would be a big help also. Hope to hear from you soon. A million thanks!!!
linktr.ee/aquacharged
Great presentation 👏
Kangen Water K8💧
Hi Medhi, I’ve read through the comments. Several people have asked where you got the reservoir or clear container attached to the pump you used in the video. Can you please comment on this? The link you provided is to a pump on Amazon. Not the Ionfaucet pump. But the pump on Amazon does not have a container to hold the water. Can you provide a link to the container please?
Hello how are you thank you so much for the concerns I am going to make a video this week explaining all the different options on purchasing a pump and the Amazon link I am creating a kit for people that purchase the Amazon pump so they can buy it and build their own pump
@@mehdicohen Thank you so much for your reply. I look forward to see your new video. For a couple of years I used the fish pump method, but after seeing your video I see that I need to change. Thank you again for all your tips and suggestions on keeping our Kangen machines in top shape and performance. You're doing a great job. Keep it up, we need this. Thank you.
I will definitely wait for your new video Medhi. More power and God bless.
linktr.ee/aquacharged
Very nice information
Thank you
Thank you very much. Very thorough.
Very informative! Thank you.
Thank you 🙏🏽 I’m glad I can help!
Hi Mehdi, your video is so helpful when we did the deep cleaning of our K8 last Dec. 2nd, and I ordered the Milwaukee orp meter and arrived two days ago, I dipped it first with distilled vinegar. I tested my 9.5 water from the machine after two weeks of deep cleaning, the reading is only -462. Why it haven’t reached the -800?
Hello there! Let me ask you a question what kind of do you use and also did you test the 2.5 in the 11.5?
@@mehdicohen do you mean the pump?
We used the one we ordered online, almost same on what you’re using. We did the deep cleaning after a year of using the K8 and we also changed the filter because it needed to be changed based from the machine noticed. But the color of the tested 9.5 is purple from testing it through the drops.
And I also tested the 11.5 and the 2.5, I copied what you did in the video, for the 11.5 it has a -495, and for the 2.5, the water from the secondary hose, it came out -122.
I haven't used my machine in months now, almost a year, so I know I need a deep cleaning. I have used the machine for about a year and knew that I needed a deep cleaning now. There is only one place nearby that does it here, and they are a bit far and opening hours aren't ideal. I was looking at options to see if I could do it myself... but that pump is expensive! I can't really afford that at the moment. Are there any cheaper options for the pump?
Hello there, how are you? I hope you’re doing well. Appreciate you for reaching out. Honestly, I haven’t been able to find anything that is Marine grade and that has the standard to not mess up your machine and give you the result you need so as of the moment, that’s one of the only options that I see Fits to be able to do the cleaning the correct professional way
@@mehdicohen Thanks for your reply! I saw several videos showing how to do a simpler deep cleaning using an aquarium pump but I also saw there were concerns about the products damaging the inside of the pumps and leaking chemicals in the machine?
@@intuitiveanma yes most definitely and that’s the reason why I created this video to show people the professional way the correct way to take care of their machine that way it can last them as intended! How long have you had your machine?
@@mehdicohen Ok thanks! Not that long, I mean, 3-4 years I think? But I have stopped using it for a while since it needed a deep cleaning and it's hard to find a place for it. I find everything complicated with this machine, even just trying to buy a new filter or supplies, they are expensive and if you order online the shipping cost is huge as well. I'm thinking of just selling it...
hello, I'm from Hungary and this clr calcium is not delivered by amazon. And in the search engine, I can't find a substitute product on our market or something that might be good.
Can you help him with what else is good instead? thank you
what if i have reversed the lines from pump to feeder too pump to acidic and turn on the pump but no water comes back up through the feeder.
btw, good video
Appreciate the support…
Let me ask you this is it coming out from the alkaline hose?
Awesome video
You rock. Thank you.
Hi - thank you for this video!! Can you make one for a deep cleaning on same machine that is mounted underneath the sink and connected to a three stage ion pre-filter?
Hello.... You're welcome! That is an awesome idea.
I don't use a 3 stage I use something different!
@@mehdicohen Could you please tell which product do you use instead of of a 3 stage ion pre-filter?.
Great video!
Thank you 🙏🏽
Thanks @Mehdi for creating this video.
Very helpful ,🙏
How often are we meant to do this?
You’re so welcome 😉 every year!
Thank you for the video. What are the specific reasons you reverse the cleaning process?
I had more success with the results when I test out the water!!!
I have a question, is there important how powerful is the pump?
Yes it’s important!
Thank you for supporting my channel for more info Visit Aquacharged.com God Bless!
Hi Medhi, thank you for your great video and it's very helpful, I share your videos with my friends a lot. I am running the deep cleaning for my K8 as your video. Now it had running for 4 hours and the Acid solution is yellow green, I did use a aquarium pump for deep cleaning but the solution was clear. Why is this happen?
Please advise, thank you.
What is going on Pat hope you're doing great thank you for all your support it is very important to use a marine grade ISO certified pump for the process. Did you by chance use CLR?
Thank you for the video. I just wondering how can or where can I get the pump with the container(bucket) and kits that come with it? I notices that the link you provided through amazon only has the pump not shown with the container, Thank you if you can help me out
linktr.ee/aquacharged
In kangen water, there is a white residue forming a large patch that can be seen by the eye when taking water with PH 9.5, I have Deep cleaning, it seems to have improved white residue. Please let me know the reason and method to handle it thoroughly
Hello how are you…!
I have four questions for you.
And when you say white residue patch is it in your bottle or cup whenever you pour it out?
Do you have pre-filtration?
And which unit do you have?
Where are you located. Do you have hard water or soft water?
Hi please help me with pre filter for Kangen K8.I have one prefilter for Enagic.Which on you recommend please.Thanks
Yes I will be happy to help! Send me a dm in instagram or Facebook !
www.multipure.com/mcardona
The filters called Aqua Perform
Respect. Great video. Good job. Can yiu check the ORP for 8.5 and 9.0
What are you getting?
Thank you
What’s going on brother thank you for the feedback I will definitely make a quick video testing the different pH levels with the ORP
Does this replace the need to mail it in to enagic?
@@stephanieraymos exactly right that’s the reason I make these videos to educate people that way they can make the best experience having their technology!
Great video! Where can i find this pump and reservoir systems?
linktr.ee/aquacharged
Megdi I'm doing deep cleaning my K8 follow your video step by step. In the finely the ph9.5 wather don't have many bubbles. Can you tell me why??
Sorry to hear that!!! let me ask you a question did you put a new filter in? And do you know your source of water? Is it hard or soft water?
thank you for responding to me @@mehdicohen . Yes I was putting a new filter after a deep cleaning. And I have a soft water ,but any way i'm used a CLR just half cup.
@@viktoriaganushina5304 what kind of pump do u use!?
Sam like you have
Great video. Looking for the pump/reservoir kit. Looks like one of the links on this page is expired?
linktr.ee/aquacharged
Excellent...
How did you hook up the diverter to to the pull down hose? I have the same faucet and I looked everywhere to have an adapter to hook up my faucet head to the diverter to no avail.
Can you please share link to the adapter?
Very interesting video. I am from singapore wondering if these device are available here.
I have loopholes on how to get people stuff from the US and send it to them. Let me know if you’re interested.
@@mehdicohen ye sure let me know how do i contact you .
Please send me how to purchase
Send me a dm in facebook
Hi sir I want to purchase pump for deep cleaning kangen machine how can order
aquacharged.com/store/aqua-clean-machine-pro
The video is very good, but I hope you will advise what the concentration of the citric acid is used for deep cleaning. For E-cleaning, as we know from the Enagic, the 2 x 30gm package of citric powder is used, I.e. about 9% concentration. So, for deep cleaning, what is the recommended concentration ? Kindly advise. Thanks.
Basically for the deep cleaning it’s an 8 ounce cup with citric acid‘s and I do 2 ounce to 4 ounces of citric acid
Thanks Mehdi. Please advise if for E-cleaning, it is 2 of 30gm Enagic package of citric powder into 400ml of water as recommended by the Enagic, then what is that in your video - how much citric powder (almost 1 cup ?) into the water you filled up in the tank ). In short, kindly advise the amount of powder and the volume of water you had used for the deep cleaning in the video. I believe, the solution has to be more concentrated than that used for E-cleaning. Thank you.
@@ssk3098 yes thank you for such an amazing question it has to be more concentrated for the deep cleaning what I always use is 1.6 L of water and one 8 ounce cup of citric acid And if you have hard water I would use 4 ounce cup of CLR if not you can use 2 ounce cup of CLR
@Mehdi Cohen
Thank you very much for your quick response and input.
I googled n got this :
1 milliliter of citric acid is equivalent 1.66 grams.
So, E-cleaning using 2x30gm into 400ml water, it forms a solution with a concentration of (60gm/1.66gm per ml )÷400ml of water = 0.09, i.e.9% of concentration.
By this calculation, your deep cleaning solution concentration = (citric acid 8oz or 393gm ÷ 1.66gm per ml ) ÷ water 1600ml =citric 236.75ml ÷ water 1600ml = 0.148, i.e. 14.8% , round off to 15%.
This is 6% more in concentration.
Do correct me if I did make a mistake in my calculations. Thank you all.
Good night !
Great video. I have 2 questions please:
1. I have an SD-501 Platinum and I run maybe 3 - 5 gallons through it a day as it's just me. How often should I clean it just with the citric acid, and how often should I deep clean it? I dont have hard water, and never saw any calcium flakes in any of my water. Machine is 4 years old.
2. The Little Giant 581503
Pump you linked to, it doesnt come with the bucket, hoses, or platform? I see Ionfaucet sells the whole thing for like $455.00.
Thank you and God Bless you.
So I would recommend to do an E cleaning every month and whenever the machine asks you to replace a filter I will do the deep cleaning I give people both options about the pump but I am about to start selling them myself a little bit cheaper than Ionfaucet if you have any more questions you can contact me in Facebook or Instagram
@@mehdicohen Thank you kindly for taking the time to reply. I would like to buy a pump from you. I have been E-cleaning my machine every 2 weeks since I installed it 4 years ago. I have never deep cleaned it, and I think I measured my ORP to be about -700mv about 6 months ago. So I would gladly give you my business as you really take it seriously and put the time in to help people!!
THANK YOU Mehdi! For your proper training Ahlem
How long do we need to rinse the machine to flush out the remaining the CLR
Hi Medhi
Good day mehdi!! i have a sd501 machine bec. our water is deep well i have a 3 BIG blue filter to filter the water before it goes to my machine. my agent tell to clean it ones a week why every 2 days or 3 days the water turns green every time i test the ph...? and i always clean it once a week. 4 days ago i deep clean the machine over nyt. and still they same hope you can help me this said matter what to do.
Is there any way we can get in contact over a call so I can explain to you what might be the issue! Have you had your well water tested before? You can call me 8649072149
What kind of water do you have? Is it municipal water or well water?
Thank you for great video.I'm a new owner of K8.And everything for me new.
I have a question: how often need to do a deep cleaning for K8?
Where you from?
@@mehdicohen I'm living in Brooklyn New York
@@mehdicohenI am interested in this as well. I an an owner of k8 for above 6 years and havent done a deep cleaning. I try to do cleaner every month. How often I need to do deep clean? Will need to get this set up
@@natalieprutyanu6995 hello there. yikes six years that’s a long time you’re supposed to do it every year.
@@natalieprutyanu6995 linktr.ee/aquacharged
Can I check what would be the approx amount of acid to water ratio?
Can we buy you set up?
I don't see a link for the pump
linktr.ee/Aquacharged
Did you get the link Gus!?
aquacharged.com/store/aqua-clean-machine-pro
Do you have a video to help me deep clean the SD501 Undercounter unit? I’ve got the dee clean pump setup already
I’m working on that video
@@mehdicohen I appreciate that! I've got lots of customers who own them and want to make sure I am able to clean them properly
Hey Mehdi, I just wanted to know where do you get that clear container that connected to the pump?
I’m going to start selling them with everything you need to build your own pump I’m just waiting on some quick connectors they were out of stock to come back to stock
How can i order from you?
@@rodilcatabay1598 you can reach out to me on Facebook or instagram
While you were running the cycle and then flushing it was the machine off or on?
Off
I hope that you could give me some advice. Thank you
How can I help you!
If any one needs the link to purchase the PUMP here it is aquacharged.com/store/aqua-clean-machine-pro
Ion faucet doesn’t offer the pump at the moment can you provide the name brand or an alternative resource thx
@@thelivingman81 If you needs the link to purchase my PUMP here from my website…
aquacharged.com/store/aqua-clean-machine-pro
Hi . Can you show me. Where i can buy the pump?
I use a submersible fish tank pump. Basically, the pump is submerged into the tank, as you would circulate the water in a fish tank. Think it's a cheaper option too.
aquacharged.com/store/aqua-clean-machine-pro
Is there any way to clean the top tube? I noticed mine has gotten black mold in it and I have no idea how to get it off and clean it. But I’m not comfortable drinking the water the comes through it now.
I usually use a straw cleaner with a little bit of water and Citric acid and and you can clean it that way
Where can I get the small pumping machine and other items for the deep cleaning. I just used my K8 since 2018 and no deep cleaning.
linktr.ee/aquacharged
where to buy the pump😊
linktr.ee/Aquacharged
Click where it says Buy pump
Where can I get this pump in Canada ? The web site doesn’t ship to Canada
I can ship it to you, but we have to get in contact so I can show you the steps in the process
CLR is safe for the machine?
My 7.0 water is kind of blue-ish? And when I do 6.0 it's only slightly yellow. I have my ph setting set to the very least (level 1). Any idea why this could be? Thanks!!
Can you check your tapwater by itself and see what color comes out?
@@mehdicohen so I did the 7.0 and the tap side by side, they're almost the same color blue except the 7.0 is slightly more green/blue and the tap is more blue. It's a VERY slight difference though
@@mothlorienVODS and that is the reason why the seven is not fully 7 because your source water is to alkaline with chemicals
@@mehdicohen is there a way to correct that??
@@mothlorienVODS yes the way I help people fix that is by getting a pre-filter. That way it can retain some of the minerals and chemicals that’s causing it to be more alkaline.
For the deep cleaning is it every year?
Yes every year you’re correct
Why do we need to reverse the cycle ???
We reverse the cycle because it cleans out the other side of the plates and the acidic hose Ineri
Good day sir is it okay? to use KURD KUTTER product still RUST, CALCIUM AND LEMON
What's going on sir... I wouldn't see why not honestly I just haven't used it myself! I like CLR because it's environmentally friendly that's what I use it. 💯
Would it be okay if I Deep clean my machine every once a month. So the first 2 weeks I (E-Clean) it and the second 2 weeks I (Deep Clean) it. I have the level R unit and I where I am at I have hard water. Would that be okay??
Honestly I would deep clean it every 6 months and just do the E-clean every two weeks and if you want to help your machine you can get a pre filter system!
thank you! But I actually do have pre-filters 3 of them that was recommended to my water. But I’m still trying to figure it out about the calcium why I still see it?
@@johnb7347 OK is there a better way I can we can talk so I can share soom information with you!
Yes here’s my email: jonb.bernardo@gmail.com
Thank you for still reaching out!
Hi Medhi,I do have the pump from ion faucet & im planning to help a friend with DEEP CLEANING HES LEVELUK R, the machine as been dumping a lot of calcium,my question is how long should I run to get it completely clean …thank you !!!!
Hey how are you so I would just follow the process the same time in that I recommend in the video but I will definitely use citric acid in CLR and that should do the job
@@mehdicohen doing well ,thank you!! That is exactly what I did Citric Acid & CLR ,thank you so much for your help and vídeos as well …looking for more content..
@@flaviomolto5277 you are so welcome I am planning out a bunch of videos to do and thank you for the support
@@flaviomolto5277 one more thing you should definitely consider having a pre-filter if you don't already!
May I know what the name of the ORP and where Could I get it ?
linktr.ee/aquacharged
You can go in the Ionfaucet tab and order your ORP there
Can I buy the reservoir tank already made for the pump?
ionfaucet.com/products/cleaning-tools/
@@mehdicohen thank you, by the way, your video was beneficial.
Where do you buy your citrus acid in bulk? Thank you in advance for your reply, enjoy the Sabbath
@@JerryDianaSzeszulski If you look in my descriptions I have a link where you can buy it
@@JerryDianaSzeszulski amzn.to/3CQGVY1
,@@mehdicohen thank you kindly. Cohen, are you from the priestly line?
How much do you charge to deep clean a machine?
499$
@@mehdicohen is that the cost for the pump from Ion Faucet or the amount you charge to deep clean someone’s machine?
@@NewSpringFlowerBloom that is the cost of the pump that we sell here at Aqua Charged
My 9.5 ph after cleaning is only around -500mv. I let it run for a minute first and then used low flow rate to test. But it’s not reaching 800 levels. I let cleaner run for 4 hours and 1 hour reverse. Any reason for this? I live in California. Thank you!
What’s going on brother hope you’re doing great man… can you I give you a call a lil later I have to ask you some questions and we can see the problem !!!
How can I purchase the whole setup?
If you wanna buy the whole set up they sell it built in Ionfaucet what is $455 plus shipping I am currently working on building my own so I can sell to people I have all the parts I’m just missing the bottom base if you want to talk in person reach me in Facebook or Instagram
I don't have those accounts
@@jchandler140 look me up as Aquacharged or Mehdi cohen
aquacharged.com/store/aqua-clean-machine-pro
CLR what???? I wouldn't put that toxic chemical anywhere near my precious machine and drinking water! Also now with severe drought and water shortage in CA people should not be leaving water running and wasting for 40 or even 20 minutes. Just five minutes of draining the machine for e-cleaning is 9 gallons wasted, 40 mins is 72 gallons of wasted water!
Our CLR Calcium, Lime and Rust Remover is non-toxic, water soluble and biodegradable. The chemicals in the product are derived from vegetables, however we recommend all safety precautions be followed, per the back label of the bottle!!!
And basically that’s the same price as the ENAGIC uses they all have to have that type of flush!!!
FYI whenever you run water that you’re not consuming it goes back out to the water plant and get recycled back to our drinking water so if anything you doing them a favor of sending them back clean water!
And like I always say you can just send it to ENAGIC and be done with it but trust me when I say that’s the same way they do it lol to everyone’s machine…
Especially in California you have to use CLR to get rid of the hard water specially the calcium buildup!🤔
Hello where can Buy the deep cleaning machine?
aquacharged.com/store/aqua-clean-machine-pro
Please
?