Been using the unger green with the accelerator for about a month now and I can hands down say it's the longest lasting rubber with fantastic glide! Taking away all the time it takes to wear in a rubber, and how much longer one lasts, I think it ends up saving money. That't not to say the Ettore Master rubber isn't also fantastic though.
Thanks kindly buddy! Loved the ova 8 pics btw! Yeah I really glad they are going to keep making it, lasts for ages which is good as I work on a lot of wooden windows so having a rubber thats a bit tougher but still good glide is very handy 😉
Great review, However I believe you missed the Unger green rubbers weakness. It’s only amazing if you use the fanning technique, if you try to straight pull down, especially with a pole, it’s not half as good as the typical black Unger Black rubber
Thanks, Mr Trad. I will indeed give that green stuff a go. I have however, about fifteen thousand years supply of old brass end-clips. So I'm assuming they'll be just as good as the square unger plastic thingies
Question tradman, I see you don't trim your rubber at angle on liquidator channel. I tried it that way but it seemed to get in the way when diving down along frames. Any suggestions? Thanks for your great reviews and videos, much appreciated.
Hey 👋 Yeah I've not cut the angles for quite some time. Personally I never get any issues but could be a difference in techniques maybe buddy. I don't 'dive bomb' down frames with liqs as it can cause judder and snagging. I try to keep the channel straight when touching frames so either horizontal or vertical if that makes any sense lol!
I found the blue moerman nxt-r hit the ground running but it squealed like a pig LOL I'm yet to try the Unger Green or Razor red I'm currently using Pulex and Unger from my local supplier. Great Video Tradster very informative
I see recently you don't cut the to fit the ends of the liquidator anymore wondering why also any tips for 18-in liquidator mine was bent but I strained it out but still I need to heat up the plastic ends to make them more flat helps a bit
I haven't cut the angles of the rubber for a long time, I've found that it makes no difference to performance but saves the hassle. With the 18 inch its just practice, if you flatten the clips, you'll find it won't zero detail very well, especially on flat laying seals. The clips give downward pressure on the tips which is what gives you that zero detailing.
I had my first day with unger green today with liquidator chanel in excelerator, i usually use ettore soft, I think i prefer the unger lovely glide and works well in the troublesome liquidator 🤣 Love your vids mate 👍👍
Hi pal I am just wondering if you can help me I am use of the moerman liquidator on a pole but when I do second floor windows I always leave a line across the bottom off the opener can you give me any idea what that would be and what is causing it you make it look so easy
Hey buddy, if possible can you send me a video via my Facebook page or via email showing the problem, perhaps reenact the problem on a low window so I can see whats happening. What rubber do you use and whats your cleaning solution setup? 😁
@@TradMan ok pal i have got ettore rubber i use fairy liquid and apply it to the liquidator i am fine on the low windows but high windows just seem leave a line across the bottom of the window
@@michaelaston8974 yeah so far so good, I just like to test things properly before I pop a review up. Get as much detail and info as possible so folks can make informed decision 👍
@@jamesphillipson6902 yeah it happens with rubber unfortunately, its very difficult to keep it 100% the same at all times, also depends on how its been stored at either the manufacturer or supplier.
Yeah its is more expensive for sure, flip side is it lasts longer so you won't chew through rubber so fast. I think paying a bit extra to get a better product is worth it 👌
Been using the unger green with the accelerator for about a month now and I can hands down say it's the longest lasting rubber with fantastic glide!
Taking away all the time it takes to wear in a rubber, and how much longer one lasts, I think it ends up saving money.
That't not to say the Ettore Master rubber isn't also fantastic though.
Totally agree buddy 👍
Fantastic video Pete. Good to know that the Unger green wasn’t just a special and they are going to carry on producing it 👍
Thanks kindly buddy! Loved the ova 8 pics btw!
Yeah I really glad they are going to keep making it, lasts for ages which is good as I work on a lot of wooden windows so having a rubber thats a bit tougher but still good glide is very handy 😉
Thank you so much for the hard work you do, your channel help me a lot for my new business window cleaning.
Thanks again, regards from Ireland
Fantastic! Your very welcome ☺️
I got a bunch of 5 of the ettore master and the green. Enjoying both but was very impressed with the green stuff!
The green unger is by all means worth it. I can’t live without it after I tried it once on my pals squegee
Yeah its superb 👌🏻
Great review, However I believe you missed the Unger green rubbers weakness. It’s only amazing if you use the fanning technique, if you try to straight pull down, especially with a pole, it’s not half as good as the typical black Unger Black rubber
Also they are sold out here in the USA, so we are hoping they will resupply. It’s a great rubber for fanning
Hello, how are you? Excuse me, could you tell me which trusted pages I can buy the ettore or unger erasers, please and thank you.
Window cleaning warehouse or window clean centre
Thanks, Mr Trad. I will indeed give that green stuff a go.
I have however, about fifteen thousand years supply of old brass end-clips. So I'm assuming they'll be just as good as the square unger plastic thingies
Question tradman, I see you don't trim your rubber at angle on liquidator channel. I tried it that way but it seemed to get in the way when diving down along frames. Any suggestions? Thanks for your great reviews and videos, much appreciated.
Hey 👋
Yeah I've not cut the angles for quite some time. Personally I never get any issues but could be a difference in techniques maybe buddy. I don't 'dive bomb' down frames with liqs as it can cause judder and snagging. I try to keep the channel straight when touching frames so either horizontal or vertical if that makes any sense lol!
I found the blue moerman nxt-r hit the ground running but it squealed like a pig LOL I'm yet to try the Unger Green or Razor red I'm currently using Pulex and Unger from my local supplier.
Great Video Tradster very informative
😉
I see recently you don't cut the to fit the ends of the liquidator anymore wondering why
also any tips for 18-in liquidator mine was bent but I strained it out but still I need to heat up the plastic ends to make them more flat helps a bit
I haven't cut the angles of the rubber for a long time, I've found that it makes no difference to performance but saves the hassle.
With the 18 inch its just practice, if you flatten the clips, you'll find it won't zero detail very well, especially on flat laying seals. The clips give downward pressure on the tips which is what gives you that zero detailing.
Dude what channel was that in the intro ???
Love it my favourite rubber
Yeah its fantastic 😀
Niceone mate , once again great to see the Maykker handy sleeve used .
😊🤜🏻🤛🏻
Another terrific review Peter. Ill be giving it a go......
Thanks buddy! Let me know what you think 🤜🏻🤛🏻
@Trad-Man Academy | Window & Gutter Cleaning I've only just ordered some Peter. Better late than never. 😊
I had my first day with unger green today with liquidator chanel in excelerator, i usually use ettore soft, I think i prefer the unger lovely glide and works well in the troublesome liquidator 🤣
Love your vids mate 👍👍
Superb!! Great feedback 👍🏻
Yeah the unger stuff is brill
Thanks for di tips, greets from🇧🇪
😁🤜🏻🤛🏻
Hi pal I am just wondering if you can help me I am use of the moerman liquidator on a pole but when I do second floor windows I always leave a line across the bottom off the opener can you give me any idea what that would be and what is causing it you make it look so easy
Hey buddy, if possible can you send me a video via my Facebook page or via email showing the problem, perhaps reenact the problem on a low window so I can see whats happening.
What rubber do you use and whats your cleaning solution setup?
😁
FB - facebook.com/mrtradman/
Email - mrtradman@hotmail.com
@@TradMan ok pal i have got ettore rubber i use fairy liquid and apply it to the liquidator i am fine on the low windows but high windows just seem leave a line across the bottom of the window
@@jasoncummings5308 sounds possible that the tool isn't at the correct angle.
What angle do you have it at when doing these higher windows?
@@TradMan 45 i think it is you can push it forward as far as it goes if pull back one thats what I use if that helps lol
Hiya Peter.. is it rubber or silicone like the razr red?
The razr never wears as it's not rubber.
The make up of the rubber is only known by Unger.
It does seem to last like razor but much better glide right! 👍🏻
It is silicone. Any rubber that is not black is silicone.@@TradMan
Cool ladder !
Thats the Ramsey A frame window cleaners ladder. 😁👍🏻
Great review Pete. Will be ordering some Cheers
No worries 👍 I'm sure you'll like it. Let me know what you think after you've used it a little while 🤜🏻🤛🏻
@@TradMan Will do thanks
@@TradMan Just ordered the whole black series kit from window cleaning warehouse using your discount code. Cheers from Richard
@@rbcleaningskegness9191 brill! Yeah that little 10% helps 😉
Moerman soft or razorblade red for me in the liquidator. Would like to try out the green stuff in the liqs
Great add
Does this rubber fit nicely into a ninja?
Yeah 👌🏻
Are you going to do a review of that maykker applicator?
Yeah after a bit more testing 😉
@@TradMan good man. Interested to see your feedback, I've been eyeing it up
@@michaelaston8974 yeah so far so good, I just like to test things properly before I pop a review up. Get as much detail and info as possible so folks can make informed decision 👍
Hi there how did it perform in cold weather?
Yeah works great, its freezing in Scotland just now but still works like normal 😉
@@TradMan Thanks pal will get some I'm using ettore at the moment but most have a bad bach Got them from window cleaning warehouse
@@jamesphillipson6902 yeah it happens with rubber unfortunately, its very difficult to keep it 100% the same at all times, also depends on how its been stored at either the manufacturer or supplier.
😎👍
😊🤜🏻🤛🏻
Good information, bit expensive maybe???
Yeah its is more expensive for sure, flip side is it lasts longer so you won't chew through rubber so fast. I think paying a bit extra to get a better product is worth it 👌
Hi mate I thought put here to say hello
Hi 👋🏻 😊