How to terminate KNX Cables into an electrical panel

Sdílet
Vložit
  • čas přidán 6. 07. 2024
  • In today's episode "How to terminate KNX Cables into an electrical panel"
    In today's episode i will share with you a way of terminating KNX Cables inside an electrical panel.
    Wago Mounting Carrier (6 mounting slots) Official WebSite : www.wago.com/global/installat...
    Wago Micro Push Wire Connector (Red) Official Web Site : www.wago.com/global/installat...
    Wago Micro Push Wire Connector (Black) Official Web Site : www.wago.com/global/installat...
    Wago Micro Push Wire Connector (Yellow) Official Web Site : www.wago.com/global/installat...
    Wago Micro Push Wire Connector (Light Gray) Official Web Site : www.wago.com/global/installat...
    Legrand Cable Markers Official WebSite : www.legrand.com/ecatalogue/03...
    Heat Shrink Tubes on Amazon (Affiliate Link) : amzn.to/2WammWk
    How to make a cheap Cable Finder - DIY Tutorial : • How to make a cheap Ca...
    Tools :
    Facom Cable Stripper : sg.rs-online.com/web/p/cable-...
    Knipex Electronics Super Knips Comfort Grip on Amazon (Affiliate Link) : amzn.to/3ghM42k
    Knipex Cable Stripper on Amazon (Affiliate Link) : amzn.to/3ghXvqD
    Dremel VersaTip 2000 on Amazon (Affiliate Link) : amzn.to/3kfIoz9
    Join Poseidwn Tech CZcams channel :
    / @poseidwntech
    Please have in mind that in order to work on a KNX project you need to be certified.
    You can find Certified KNX Training Centres in the link below.
    www.knx.org/knx-en/for-profes...
    Poseidwn Tech on Social Media:
    www.poseidwn.tech
    / poseidwn_tech
    / poseidwn.tech
    / poseidwn.tech
    / poseidwntech
    KNX Tutorials Playlist : • KNX Tutorials
    KNX Web Page : www.knx.org/knx-en/index.php
    ETS Software : www.knx.org/knx-en/software/e...
    KNX Training : my.knx.org/
    KNX Basic Course Documentation : amzn.to/2pASDCM
    KNX Advanced Course Documentation : amzn.to/2I1mw68
  • Věda a technologie

Komentáře • 24

  • @michcritch3824
    @michcritch3824 Před 6 měsíci

    Great stuff!

  • @dsmviper
    @dsmviper Před 2 lety

    Spectacular video tutorial, preciate👏🏽👏🏽👏🏽

  • @Yetimon
    @Yetimon Před 2 lety +2

    Thanks, I didn't know those 8-way DIN connectors existed. I'm asking my supplier for them now :)

    • @PoseidwnTech
      @PoseidwnTech  Před 2 lety

      You are welcome! Thank you for your comment!

  • @francescolongobardi8291

    Great content!! I really enjoy your videos about KNX, it's a very powerful system and it should be spread more. It would be very interesting to see a video showing a real system, to understand how and where all the components are mounted.

    • @PoseidwnTech
      @PoseidwnTech  Před 2 lety +1

      It is in our plans to make such a video. Thank you for your comment!

  • @Electrical_decorations
    @Electrical_decorations Před 3 měsíci

    شكرا ❤

  • @DmitriNesteruk
    @DmitriNesteruk Před 9 měsíci

    Phoenix Contact make KNX-specific terminal blocks that can be bridged.

  • @pietermech
    @pietermech Před 2 lety +1

    Personally I rather use "phoenix PTFIX 6/6X2,5". Since they have the option to easily take out a wire. They are also din mountable and in different colours available.
    But thanks for your great video! ;)

    • @PoseidwnTech
      @PoseidwnTech  Před 2 lety

      Thank you for sharing that and for your comment! I will give it a try!

  • @antonismallidis6461
    @antonismallidis6461 Před 2 lety

    Great video , where did you find those wago products ?

    • @PoseidwnTech
      @PoseidwnTech  Před 2 lety +1

      Thank you for your comment! In Greece we buy Wago products from Dimoulas : www.dimoulas.eu/klemmes-bysmata/caps/mounting-carrier-for-6-connectors-243-series-for-din-35-rail-mounting-screw-mounting-orange/

  • @yousefr433
    @yousefr433 Před 2 lety

    1:30 , if i wanted, i can connect the cables directly to the actuators, right ?

  • @catalinIntimidatorul
    @catalinIntimidatorul Před 3 měsíci

    Nice work!
    But I have a question!
    How do you connect white and yellow wires? You conected only red and black...

    • @PoseidwnTech
      @PoseidwnTech  Před 3 měsíci

      Thanks! In Wago connector, I terminated both the red-black and yellow-white wires, although I didn't actually need them in this installation. The reason I do that in every installation is to be prepared. For example, when I have a KNX device that requires additional auxiliary power through the yellow-white wires, I'm already set.

  • @kamrannazari3481
    @kamrannazari3481 Před rokem

    Where can you download a map of wiring and how to wire a building with different equipment

    • @PoseidwnTech
      @PoseidwnTech  Před rokem

      What do you mean a map of wiring? Normally before installing the KNX devices there is a KNX study that must be followed.

  • @egfdevos
    @egfdevos Před 2 lety +6

    Cable cores should never ever come in contact with the 230V wires. > = 4mm clearance space. Also do not remove more sheath from the cable then needed. This would not pas an inspection.

    • @PoseidwnTech
      @PoseidwnTech  Před 2 lety +1

      Thank you for your feedback. If you have any additional info or best practises please share them.

  • @okikrisna8619
    @okikrisna8619 Před 2 lety

    anyone can sent me the basic Instalation of KNX
    because my vendor Disepier

  • @nikosvaidis5397
    @nikosvaidis5397 Před 2 lety

    Μήπως δε θα έπρεπε να κόψεις τα συρματάκια γείωσης των πράσινων καλωδίων αλλά να τα γειώσεις σε μια μπάρα;

    • @maxking3
      @maxking3 Před 11 měsíci +1

      KNX Wires are not to be „earthed“ at either side.