How to install IP cameras using POE NVR

How to install IP cameras using a POE NVR.
It shows an example of a POE NVR, showing the POE ports and how it can be described in terms of its channel capacity.
It shows what POE IP cameras are made of.
The terminals that you would find on POE IP cameras and the use of each terminal.
This video also shows how to connect each POE IP cameras to the POE NVR.
How to connect the POE NVR to a monitor through a VGA Cable.
There has been a test of the connected cameras on a monitor which has been connected to the systems for monitoring of the cameras.

[@user-no1ix3iy5e]

Thank you so much I really enjoyed the video very simple to understand

[@Tech_Inside_Out]

You are welcome. You can find more of our videos at www.youtube.com/@tech_inside_out

[@gilbertboafo9425]

thank you soo much. You make things look soo much easy.

[@Tech_Inside_Out]

Thanks very much

[@author_brandymarks]

Thank you. This is the simplest yet and I’m thrilled because as you explained it, I was able to connect my cameras to my DVR without a problem. although, my monitor to DVR cable is USB, it was easy to see where they connected and voila… it works, I wish. The monitor is on and the NVR but it says “No Signal.” Sigh. Maybe I’ll just sent it back. So frustrating.

[@Tech_Inside_Out]

Am excited it worked for you. Please check your cable connecting your camera.

[@tonny_n]

Thank you..

[@Tech_Inside_Out]

Most welcome

[@ballygarran]

Nice tutorial. One question that maybe you haven’t had before.
Is it possible to connect a monitor in one room via the VDA port & also connecting to my TV in another room using the HDMI port. Two permanent connections.

[@Tech_Inside_Out]

Yes, you can do that

[@ryanmason491]

Perhaps a silly question but does it matter how many POE ports you have if you are only using a switch? For example if I have 4 POE ports on my NVR but have a 9 port Switch with 9 cameras plugged into the switch would this work okay and I be able to view all 9? Or would this be too much for the NVR? Many Thanks

[@Tech_Inside_Out]

You have asked a very good question, and the answer is that the number of ports on the NVR is the maximum number of cameras that the firmware in the NVR has been designed to receive.
There are some brands that may give room to go beyond the POE ports on the NVR, in such a case, you would see the NVR capacity stated with the number of cameras it takes.
Please let me know if I have been able to Well address your question.

[@techportalzw]

Looks easy from you

[@Tech_Inside_Out]

Its indeed easy and doable

[@emmanuelkarikari3554]

Please how do I differentiate between ip cameras and analog cameras in terms of video quality. Thank you.

[@Tech_Inside_Out]

Please watch this video, it answers most of the questions
czcams.com/video/J4ERUDIfgTo/video.html

[@antoniogalluccio4213]

I haven't seen you connecting the NVR to the routher though

[@Tech_Inside_Out]

Yes, it is because I didn't show the remote view process for this setup.

[@paulade2658]

Can a NVR that has only one Poe port accommodate any number of IP cameras from a Poe switch? Or single port NVRs has limited capacity of IP cameras that can be fed into them via Poe switches?

[@Tech_Inside_Out]

They have specific capacities such as 4 channel, 8 channel and so on. You can't exceed its capacity

[@user-zt7cw3mm5e]

​@@Tech_Inside_Outplease how to called you number

[@martinxenodzi3866]

when is it neccessary to use power splitter?

[@Tech_Inside_Out]

The splitters are used whenever you are using non POE IP cameras and you wish to power them up through the same network cable that carries video from the camera.

[@titusmbindyo]

I have a question
Why did you not connecting poE port you use one poE port

[@Tech_Inside_Out]

Please I don't quite understand your question. Please explain further.

[@emmawilson2799]

How do I know if the port is a POE port without the name on the switch

[@Tech_Inside_Out]

It is written on the Packaging, you can't determine whether an ethernet port is poe or non poe unless it is written on it

[@khalif-w]

Pls show How to connect audio camera with dvr not nvr

[@Tech_Inside_Out]

Well noted

[@netrocker9990]

Can we use HDMI to connect nvr and monitor?

[@Tech_Inside_Out]

Yes, you cab use HDMI

[@ImranAli-qv5ox]

how to install non poe ip camera with nvr and how to online camera make next video on it step by step.bring more complete course series make all videos sequences classes wise step by step.

[@Tech_Inside_Out]

Noted

[@kingmasternice1975]

Where is the Router or where you connect from the internet

[@Tech_Inside_Out]

I did not use internet in this setup.