How to Replace Camshaft Position Sensors 2011-2014 Hyundai Sonata
Vložit
- čas přidán 27. 08. 2024
- Buy Now!
New Camshaft Position Sensor from 1AAuto.com 1aau.to/ia/1ACP...
This video shows you how to install a new camshaft position sensor in your 2011-2014 Hyundai Sonata. For vehicles with electronically controlled timing, a camshaft position sensor relays important information to the computer to ensure the engine is running properly. A bad sensor may relay incorrect or no information, resulting in poor running conditions and trouble codes.
This repair was done on a 2013 Hyundai Sonata GLS 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2011 Hyundai Sonata
2012 Hyundai Sonata
2013 Hyundai Sonata
2014 Hyundai Sonata
Tools you will need:
• 10mm Socket 1aau.to/obxD/1A...
• 12mm Socket 1aau.to/obUt/1A...
• 3/8 Inch Drive Ratchet 1aau.to/obUt/1A...
• Torque Wrench 1aau.to/oaZ9/1A...
• Gloves 1aau.to/oaKT/1A...
• Safety Glasses
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.