REBUILD MAIN PUMP KAWASAKI K7V125 WITH UNUSUAL SOUND + HIGH VIBRATION PROBLEM | INSTALL TO SK200-10
Vložit
- čas přidán 18. 12. 2022
- REBUILD MAIN PUMP K7V125 WITH UNUSUAL SOUND + HIGH VIBRATION PROBLEM | INSTALL TO KOBELCO SK200-10
MERAKIT MAIN PUMP KAWASAKI K7V125 DENGAN MASALAH SUARA YANG BERISIK DAN GETARAN YANG TINGGI | PASANG KE SK200-10
Before the pump was disassembled, we noticed that the pump was very noisy when the engine was started, after that we decided to take the pump down and disassemble it.
after being dismantled, it turned out that the noise was caused by a worn valve plate caused by rubbing with dirt. we decided to take the pump to our workshop to have it repaired.
Social Media :
Instagram : sinarutamaengineering
Facebook : Sue
If you think this video is useful, don't forget to share, like, comment, and subscribe so that this channel can grow!
Thank you for watching! - Auta a dopravní prostředky
Bro can you make a video on how to adjust it flow from regulator
Sudah sy lengkapi,semangat y mas💪💪
This hydraulic pump spare parts are same can we use k3v112dt spare parts in it.
Thank for sharing keep uploading video on hydraulic servicing
I will try my best
Please share the part purchase site.
Maaf bos mau nanya.... Kalau sumitomo sh 215-5 trek baket dan bom lambat... Setelah paip di mimpam di balek yang lambatpun ikuk pindah... Padahal mimpam baru di perbarui.... Agak2 apa masalahya bos
itu bermasalah pada pompa 2 (P2), jika diperbarui masih tetap bermasalah maka disarankan untuk ganti baru
@@HEWORKSHOP apa gak bisa di perbaharui ya bos
sangat bisa
Ok bos trimakasih
Kalau tenaga x lemah penyebab x AF bos
Banyak faktor, bisa dr engine, hyd sistem, elektrik sistem dll
@@HEWORKSHOP kalau piston apakah bisa jg aus
tentu saja
Kok rata" begitu ya bang,, setiap bongkar mainpmp SK-10 pzt di suasplitenya itu rata" retak dua"nya lagi
karena desain nya kurang kokoh