Are you "Livin' on the Edge?" Now's a good time to start! Remember to download your free 3 Steps to EdgeTX Success guide here bit.ly/3StepstoEdgeTXSuccessGuide and visit my site at tmacfpv.com/ for more FPV fun stuff!
Hey TMac Ever since i switched to Edge i have problems setting up modes. For Ex: I went to setuo Arm for my mobula 6 . All my controls work except the arm switch mode. It seems to work on my tx16s but not any functions on beta flight. In the receiver tab all controls work except the switch i have setup for arm. Any ideas? Thanks
@@johnlheneghan1630 John, I haven't taken the leap into Edge yet, but I read that in EdgeTX you must use channel 5 and Arm high. I have no idea why it would be different, but I've read this in several places.
It's been a while since your last video. I hope all is well with you and that you will soon again help us with your very informative videos. I think there are more than me who are a little worried.
Hey TMac, hope you are ok. Hope you are just busy with stuff (like nearly everybody these tines) and you are at best health. Best wishes from Germany (where everything is so expensive so we watch Videos about stuff we cant buy amymore ;-) )
Maybe it's time! I'm so dug in with OTX. I actually did the backup and made the Edge SD card a few months ago and decided to wait for the December update. I find that I don't do a lot of editing at the field, so the touch screen model selection is probably the main benefit for me in actual use. This is an awesome and thorough tutorial, has me eyeballing that outdated SD card again. 🍻🤣
I’m about to go into a TX16 with EdgeTx, initially as a secondary Tx with the goal of making it a primary. Good information in your video, I did subscribed!
i am using edge 2.6 but when i try to use edge buddy companion everything is right i have the stm32 and when i hit flash it downloads but it wont erase the SD card. im doing these because i have no themes ? i have tried a couple different ways even a blank sd card but it just wont erase . i already have the yaml on there seems like i'm missing a step . help please.... i can even see main themes on my sd card via transmitter screen but have no idea why they wont show up in the theme editor. im sure this is something simple im doing wrong
Nice video, thanks for the useful content. Just one observation about this video - it would have been nice to do the color and monochrome styles as separate streams. It got rather confusing at times trying to follow the steps as you were switching back and forth between the types through the steps.
If I have not mentioned it before. Thank you for the time and effort you put into your videos. Another CZcamsr has announced a pre-release of Edge 2.8. It has not been completely released yet, but he suggests checking it out on a non-production radio. I have one. When I download the firmware, which file would I copy it to?
I have edgetx now on my radio.. not sure what I did wrong. When I 1st switched over. All my switches I had set up were there...then they disappeared some how..not sure how I caused that.. now have to do all that all over again
@@TMacFPV Well that was painless. Goterdun today with no problem with this easy to follow guide. I also had no problem updating the Inav lua script and the gps widget and log. I do like the touch screen. It is a lot easier and faster when setting up the screens, even though I may not use it much in the field. By the way, I was watching a different video of yours today-I think the one about GPS logging, and I saw you had a UCF shirt on. Do you have any connections there? I graduated from there and still live in the area. Thanks again TMac.
@@kurtzFPV Perfect Bryan! A fellow Knight!🤩 UCF grad from '87. Left the area that year to start my USAF career. Haven't lived in Central Florida since. Closest I came was my last assignment at Univ of Miami
Ok.. question...how come you use opentx companion to copy firmware an models an settings on the radio...when it looked to me you just copied an pasted from the opentx sd card contents
Hi, i have a problem, i have successfully installed edgetx but i have a problem with multi position switches. when I press the 6 keys, the position of the S2 slider moves me. what can it be? thank you
Great Video! It's very practical and the "3 Steps to EdgeTX Success" are genial!! I wish I had discovered it earlier. I had a poor start with EdgeTX after I followed another CZcams channel which had way too much information. Your video addresses the process in a very non nonsense mode. Nice Job! Q: Do you have more info on that "Edge Theme Creator"? For example: How do you install it? (I may have missed it)
Hallo I need your help I have xm+ and r9m mod elrs. Before I install firmware edge tx everything normal. But after I use firmware edge tx my receiver not binding (xm+ and r9m mod elrs). What should I do? Thanks for answering 🙏
Hi fantastic video, could I just ask if it’s possible to copy models from my taranis x9d plus special addition pre 2019 to my new radiomaster TX16s max, I tried it and it worked , had to change some of the settings as some functions are different on tx16
Yes. I just switched all my transmitters to EdgeTX (you may have seen a few in the video?). I wouldn't have done that if I didn't think highly of EdgeTX
@@TMacFPV To be fair, your video shows converting a RadioMaster TX16S & TX12 from OpenTX to EdgeTX. It does not show how to move models from an Taranis Qx7 running OpenTX or EdgeTX to a RadioMaster TX16S running EdgeTX.
@WINGSHIGH Aviation If you haven't already found your answer, you might want to watch videos on moving your models and settings from your Qx7 to your TX16S while both are on OpenTX. Then use TMac's video to convert to EdgeTX.
Are you "Livin' on the Edge?" Now's a good time to start! Remember to download your free 3 Steps to EdgeTX Success guide here bit.ly/3StepstoEdgeTXSuccessGuide and visit my site at tmacfpv.com/ for more FPV fun stuff!
Hey TMac
Ever since i switched to Edge i have problems setting up modes. For Ex: I went to setuo Arm for my mobula 6 . All my controls work except the arm switch mode. It seems to work on my tx16s but not any functions on beta flight. In the receiver tab all controls work except the switch i have setup for arm.
Any ideas? Thanks
@@johnlheneghan1630 John, I haven't taken the leap into Edge yet, but I read that in EdgeTX you must use channel 5 and Arm high. I have no idea why it would be different, but I've read this in several places.
We miss you!
Is he ok? I have been trying to find out but no luck. Any info?
Hello Mr. TMac, it’s been long since you uploaded any video. I really love your content. It’s very informative. I hope you’re doing well.
Yeah I miss his excellent made videos. No news why the channel suddenly froze.
It's been a while since your last video.
I hope all is well with you and that you will soon again help us with your very informative videos.
I think there are more than me who are a little worried.
Hey Peter! All is well. Thank you for thinking of me. Have other stuff going on right now. Take care and Clear Skies my friend!👍
@@TMacFPV Thank god your well
Top level. I did it step by step and I'm useless with computers. Appreciated.
My new favourite CZcams Channel (for FPV-Stuff),👍
impeccable tutorial, not sure anybody else could do something as clear as this for one radio nevermind two.
Best instructions yet to upgrading to EdgeTX. Thank you for sharing.
Thanks Manny🙏My pleasure friend 👍
Hey TMac, hope you are ok. Hope you are just busy with stuff (like nearly everybody these tines) and you are at best health.
Best wishes from Germany (where everything is so expensive so we watch Videos about stuff we cant buy amymore ;-) )
Maybe it's time! I'm so dug in with OTX. I actually did the backup and made the Edge SD card a few months ago and decided to wait for the December update. I find that I don't do a lot of editing at the field, so the touch screen model selection is probably the main benefit for me in actual use.
This is an awesome and thorough tutorial, has me eyeballing that outdated SD card again. 🍻🤣
I’m about to go into a TX16 with EdgeTx, initially as a secondary Tx with the goal of making it a primary.
Good information in your video, I did subscribed!
Long time no hear Tmac,is all ok there.
I'll be needing this video soon. I just ordered the TX16s radio and want the touchscreen to work.
You doing alright man. Haven’t heard fro you in a while my man. Miss your information sir.
Bom existir pessoas igual a você.
Graças a você, eu, no Rio de Janeiro consigo configurar facilmente meu TX12.
i am using edge 2.6 but when i try to use edge buddy companion everything is right i have the stm32 and when i hit flash it downloads but it wont erase the SD card. im doing these because i have no themes ? i have tried a couple different ways even a blank sd card but it just wont erase . i already have the yaml on there seems like i'm missing a step . help please.... i can even see main themes on my sd card via transmitter screen but have no idea why they wont show up in the theme editor. im sure this is something simple im doing wrong
Gr8 tut! Where did you go? Hope all is well.
Whats happened to TMac, no videos for a year. Hope alls well with you TMac
Nice video, thanks for the useful content. Just one observation about this video - it would have been nice to do the color and monochrome styles as separate streams. It got rather confusing at times trying to follow the steps as you were switching back and forth between the types through the steps.
You're welcome
This is very helpful. It would be better if you just focused on the TX16S. This would avoid confusion. Thanks
If I have not mentioned it before. Thank you for the time and effort you put into your videos. Another CZcamsr has announced a pre-release of Edge 2.8. It has not been completely released yet, but he suggests checking it out on a non-production radio. I have one. When I download the firmware, which file would I copy it to?
Best guide you can imagine
sir, where are you ?
I have edgetx now on my radio.. not sure what I did wrong. When I 1st switched over. All my switches I had set up were there...then they disappeared some how..not sure how I caused that.. now have to do all that all over again
Where have you been?? Hope all is well!
Woo-hoo! I know what I'm doing this weekend. Thanks!
😂Told you I hadn't forgotten. Hope you have fun with it Bryan!
@@TMacFPV Well that was painless. Goterdun today with no problem with this easy to follow guide. I also had no problem updating the Inav lua script and the gps widget and log. I do like the touch screen. It is a lot easier and faster when setting up the screens, even though I may not use it much in the field. By the way, I was watching a different video of yours today-I think the one about GPS logging, and I saw you had a UCF shirt on. Do you have any connections there? I graduated from there and still live in the area. Thanks again TMac.
@@kurtzFPV Perfect Bryan! A fellow Knight!🤩 UCF grad from '87. Left the area that year to start my USAF career. Haven't lived in Central Florida since. Closest I came was my last assignment at Univ of Miami
@@TMacFPV Very cool. 1985 for me. We probably walked past one another at least once back then.
@@kurtzFPV Wow! Small world indeed! 😁
Can please tell which is the latest edgetx sd card content version and corresponding firmware version for Radiomaster tx16s.
Success!!!!!!!!!!!!! Saved my life. Thanks a lot
Ok.. question...how come you use opentx companion to copy firmware an models an settings on the radio...when it looked to me you just copied an pasted from the opentx sd card contents
I hope you're doing alright.
thanks this helped me out a lot
Sure thing!
Great video thank u Tmac.
Good one but got very confusing as you had 2 radios going at once and made little sense at times but thank you
nice job buddy great content.
Hi, i have a problem, i have successfully installed edgetx but i have a problem with multi position switches. when I press the 6 keys, the position of the S2 slider moves me. what can it be? thank you
Great Video! It's very practical and the "3 Steps to EdgeTX Success" are genial!!
I wish I had discovered it earlier. I had a poor start with EdgeTX after I followed another CZcams channel which had way too much information. Your video addresses the process in a very non nonsense mode. Nice Job!
Q: Do you have more info on that "Edge Theme Creator"? For example: How do you install it? (I may have missed it)
How to use Theme Creator was in the video
@@TMacFPV Awesome. I had missed the URL. THANKS - Great content!
Hi, I'm afraid the pdf link doesn't work for me
Hallo I need your help
I have xm+ and r9m mod elrs. Before I install firmware edge tx everything normal. But after I use firmware edge tx my receiver not binding (xm+ and r9m mod elrs).
What should I do?
Thanks for answering 🙏
Is there any thing about YAML I need to worry about doing this conversion? There seems to be some confusion the radio will not read YAML files.
Been a while since you last made a video....... are you unwell?
Hi fantastic video, could I just ask if it’s possible to copy models from my taranis x9d plus special addition pre 2019 to my new radiomaster TX16s max, I tried it and it worked , had to change some of the settings as some functions are different on tx16
Would you recommend at this point to use edge over open?
Yes. I just switched all my transmitters to EdgeTX (you may have seen a few in the video?). I wouldn't have done that if I didn't think highly of EdgeTX
@@TMacFPV great thank you. I'm a very new user to my TX16s. Does edge have the same pc interface like the open has with companion?
Is this methods better than the edgetx buddy browsers flash
you haven't uploaded in a long time is all well?
Hey TMac - haven't seen you in a while.... I hope that everything is ok on your end
Hey SunsetPark FPV, great to hear from you! All is well on my end, just busy with other stuff. Take care, fly fearlessly, & always Clear Skies!👍🌅
Is the process same for jumper t lite?
Can we transfer models and settings from opentx to edgetx? I'm wanting to transfer from a Qx7 to Radiomaster t16s
You obviously have not watched the video
@@TMacFPV To be fair, your video shows converting a RadioMaster TX16S & TX12 from OpenTX to EdgeTX. It does not show how to move models from an Taranis Qx7 running OpenTX or EdgeTX to a RadioMaster TX16S running EdgeTX.
@WINGSHIGH Aviation If you haven't already found your answer, you might want to watch videos on moving your models and settings from your Qx7 to your TX16S while both are on OpenTX. Then use TMac's video to convert to EdgeTX.
Hi mac, how ru?
Does anyone know where tmac is?
He's posted something on his facebook. Just taking time off from social media and posting vids, says he's doing fine.
@@austntexan thankyou so much for the reply,I was starting to worry a bit,I miss his videos a lot there very informative and fun.
Tango 2.....2 weeks.
i just switch to edge
TMAC decided to move on with his life. No more FPV drone. I dont blame you Tmac. Boring stuff. I've moved on also
Well if there's no more videos guess its time to unsubscribe, not even a reason why pretty poor considering