“I’m not a sports person, but maybe a little flash of *sports* is happening in the back of my brain, in the lizard brain part of my insides” is a superb sentence hahaha
Great fun to get it together that quick. Should be fun getting it together as a unique build. Good luck!
I like the 70's look of the natural wood with a tortoise pickguard. It even has the big block inlays and bound neck.
The grain on the body looks great, especially with that pickguard. Sand the body and finish with a dark tinted Danish oil. Leave the neck and headstock in their natural lighter colors. Trim the headstock into an arrow shape (see: Fender Katana).
Hey Ryan, it's pretty standard for P90s to not be hum canceling. The P90s in my Player Series Mustang 90 came from the factory non-hum canceling, and the set I replaced them with which are a set from a Tribute SG are also not hum canceling.
Way cool my two favorite tubers competing on a guitar build, makes me want to try my hand at it
I'm always here for the fast-forward-soundtrack. This song gets stuck in my head weekly.
Great idea, and I was all in on ordering a kit. Until the shipping doubled the price. If you can get this kit shipped for around $100 it’s probably a load of fun. At $160 I can pick up a used Squire and go to work modding that. And have a body that will accept a more common neck. Still a great idea.
Same here - even if they could get the shipping down to half of what it is I might do it.
Don't know if you'd want multiple projects, but you could get multiple kits for the one shipping cost. A couple years ago I got some others together for an order, and we got four our five guitars for one shipping charge. Shipping was less then, but the principle is the same.
There are plenty of good kits being made all over the planet, Harley Benton is far from the only choice. Check your area.
Sounds great!
Leave the body natural finish! Looks killer. As for the headstock, thinking similar to the Fender Katana series. Everything else, up to you.
Emmanuel's a great guy, you'll need him
I fancy this model, glad you reviewed this model, decent guitar for modifiying
I just noticed I had to subscribe again to you and I never un subbed. Love your vids!
Don't worry about it, take a 220 grit sandpaper and sand the fret ends and the neck and even fretboard. Just always go with the grain, you won't hurt anything. Start at 220 work your way down to 2000 grit. I do all my guitar. When I crown and relevel I sand everything the whole fret board the frets. Never have a problem. Necks are hardwood, you won't dig into them with finer grit paper.
I am doing one of those as well. I am excited to see how yours differs from mine. Enjoy!
I did this kit a couple of years ago and around that time I had a Squier Strat with that '70's headstock. I really like that shape but once I had downloaded and printed out a stencil, I found out the HB headstock is too small for that cut. So I did a traditional Fender headstock. I painted mine in a surf-green kind of color (this is a surf guitar:). I had to file down the fret ends and a few months later I swapped the tuners for some Fender tuners I had. I saw somebody on youtube install a jazzmaster bridge into this and maybe I will someday. I'm fine with the pick-ups and I really like my guitar. These HB instruments are just very nice.
Series switching on a couple of singles and Duesenberg les trem would be fun and simple!
Amazing video, Looks are subjective but I would go for a sparkle metallic finish with a matching headstock. From a purely practical point of view, if you are going for a vibrato system, I think you can get away with a cheap but quality Bigsby, roller saddles, and locking tuners. The split shaft tuners on American Performer or the tuners on the new Squier Affinity could also fit with no extra hassle but I could not find those for sale anywhere!
Just ordered one, looking forward to putting it together, might paint it mat black or something.
Hoorah! your beard has arrived!
it is no longer "excessive stubble" it has just entered beard territory and I am pleased to be able to look at your face again.
I just ordered one of these today! Along with a Fusion-T HH Roasted FNT
I'd love to see you try the Duesenburg Le Trem!
Agree. It has a really cool feel and super easy drop in replacement for stop tail pieces.
i think a lace paintjob would be fun to experiment with it, like a gold base color and than shoot a candy red on top of it or a burst of sorts
i really like the wood the bodies made out of interested to see what you come up with also the comments lol.
I think you should do a splatter paint job on it. Like Jackson Pollock.
Complimenti, sei un grande
Well done Ryan, sounds good to me,
great considering fresh out of the box and without full setup.
Looks great...apart from headstock.
I just spent 10 minutes setting the action and it actually plays way better than I would have expected from a 30 minute kit build. I’d put this in the hands of a beginner no problem.
A transparent sea form green so you can still see the natural grain, cut the head like a wave, hippie strap, and a trem ☺
I would love to see offset position of pickups (like mustang), some cool switching (neck+bridge in series/parallel, out of phase), matching headstock, bone nut, mastery bridge, les trem II....
Turn it into a keyboard.......Top that Andy!!!
You should brand it with your logo then give it a surf green finish.
I got the T style kit and I like the scuffing on mine 😊
Ryan wanting a wiggle stick? Is anyone surprised? Nope?
Didn't think so. Hope you have fun, and I may have to get a kit myself.
The guitar looks and sounds good. The pickups are a bit bassy for my taste, but it could have been the Amp settings,.🤷♂️ Changing the Tone Cap to a lower value would make the pickups sound brighter. I'm impressed, as it seems like it went together easily, and has no major flaws. Dialing it in, tidying up the frets, adjusting the action, etc. are all things to be expected for such a guitar. Before you mod it to your taste, I hope you do a quick "tone" blind test with a brand name guitar in the $500 - $1,500 price range, with the same style pickup. That would be fun. 😎
Whatever you do paint match the headstock. Also if you didn’t for some crazy reason want the p-90’s a mini humbucker will fit those routes. I’m sure you knew that. But definitely paint the head stock. I’d paint it, put my own decal on it then clear coat it.
I just change the pickups and the harley bentons are peachy. Didn't know they made kits but Ima check out what styles they got now.
You forgot to do that thing where you scream at the pickups
You put that guitar together faster than it took me to change out the tuners on my Firefly.
Ok, here's one. Square off the edges, paint it vintage white, black neck and stock. Bind front and back in the same tortoise-shell shade of the pickguard. Chicken-head knobs. Shoot for something art-deco with the headstock. It'll give it a fantasy-50's sorta look.
sweet kit for 80bux!
hekk youll easily have more than 80 in a neck alone!
Man you threw that together in like half an hour, what’s Fender custom shop’s problem? lol
Last comment of the day to help out. I have a Tele kit from Harley Benton and are the fret ends sharp, oh dear.
Sounds cool and it's easy to mount though.
Cut the horns off and maybe route a few random holes to give it those 70s home mods gone wrong vibes.
I love your mad scientist laugh
Spray the body with adhesive, then dust it all over with silver glitter, then spray varnish it. Slap on a Bigsby and call it a Gretsch!
I've had this kit for 1 year now and it's amazing! I replaced the tuners and installed a Duesenberg Tremola, best guitar I have
@@ryanyoung725 The Kluson MC6LN, but they dont quite fit, they are vintage spec, so they have a smaller diameter and you have to drill new holes (be careful, that might split the wood). I would actually suggest the Kluson MK6LN
Les Trem would be the easiest wiggle stick, but a Goldo DG trem shorty (which is on your High Spirit guitar) would be cool and only required a couple holes with a forstner bit. You'd just need to address the post holes left by the original tail piece.
Colin did a yellow furry muppet-themed jazzmaster. Its funny. Sounded real good.
Phase switch and/or Series-Parallel
It needs a tremolo though, half the point of a offset surfguitar imho ;)
Let the kids paint on it then clear coat
I built that Kit myself. The neck is nice.
Another Nail polish Finish (maybe something sparklin...) and the new LT2 flat arm Trem (les Trem, lic. by Duesenberg) would be nice!
flloyd rose trem for your wiggle stick. bigsby would look too weird. round out the headstock and stain it to match the body. clear coat them both. sign the back of the headstock. you should get a blacksmith to forge you a branding iron with your logo on it to brand custom builds that you do.
Would be cool to make the bottom half of the head stock to look like a surfboard.
You should try to get them to send you a Virtual Jeff to try out on this guitar. I’m kind of surprised they haven’t sent you one to review already.
BRO... Bigsby, bro. Bigsby. 🤘
I say Bigsby style for that wiggle stick. That way you don't need to route the body.
Shipping is literally more than the guitar to the US. Definitely for EMEA customers only.
Out of the box and slapped together it sound pretty good, How would you compare it to an similar Squier? I like the gloss finish, i always have, What i use to do, and dont laugh, I go over the body with copper grease and wipe it of just to get a little extra glow in it. My trigger is set by now and today i order their new hollow body ES kit, And dont compeet on that, because you need to do the old wire fishing. If i get the pickups turned around i will just let it be. It seems that the new ES are both a set neck and bolt on option.
For a wiggle stick on the cheap, try out a Duesenberg Les Trem. On the not cheap, try out a Stetsbar stop tail. I'd love to see an honest opinion on either/both.
I ordered a les trem for my yamaha revstar recently, i have some other plans for the harley benton
Don't paint it! That finish with the pivk haird looks awesome
What is going on in my life? LOL I keep seeing all these cool guitars with P90 pickups. I get the strange feeling that I am getting a hint here. Sweet sounding guitar for a half hour build.
Frx floyd rose for your wiggle stick
Les trem, killswitch, Manic Panic hair dye for a stain, pointy shredder headstock
Slick kit. I think it needs a bigsby style tremolo
Can this guitar HB JA60-0W be played well? Solo Wish you were here. Does this guitar need a tremolo bridge to play like D. Gilmour? Which one for that?
I know this is a little off topic, but…I’ve been looking for peoples opinions regarding the true spring vs. Ventris vs. oceans 11 vs etc. because I have a problem and I can’t stop buying reverb pedals. Anyway, I stumbled upon a surf forum and the post was about the true spring that had just come out at the time and everyone was curious about Ryan’s opinion. Every other post mentioned “Ryan” in some way, this Ryan guy is clearly a big deal because no one is shutting up about what he might think about the true spring. No one specified exactly who Ryan was, but I have a sneaking suspicion I know who the prophet of this strange surf cult may be.
I think this video has his most recent top picks: czcams.com/video/tNMCQBPDlT4/video.html Although he’s reviewed a few others since then, but I don’t think anything has challenged those top picks.
I'd like to see a demo of a Duesenberg Les Trem II for TOM bridges. Really tempted to get one, but I'm not sure what they'll be like.
spring reverb in (or on) the guitar
I'd do Firebird pickups 😁
I would stain it orange and give it a foxtail 🦊. It would be interesting if you come across any quality issues during the build or if it turns into a guitar that you can wholeheartedly recommend?
How close are the neck pocket dimensions to Fender specs?
$80.00!!!!! Shazaam! What a deal! The shipping will probably add a fair amount onto that, but still. What a great platform to mess with....or .... leave as is.
Hey..off subject...
How do you get rid of doghairs on the fretboard of a Firefly semi hollow?..& should it matter?
@Telegram only @sixtycycle hey..i am not social media literate..i am coloring outside the lines just by leaving a comment..i dont know how to hit someone up..
Does it invole my 8 track player somehow?
Just received the same kit.....now....what color or design.....Opinion of the stock P90S?
You need some different high speed music! That gets stuck in my head all day! Lol
Good beard length! 🧔♂️
Add a B Bender. Win Win🤘🤘
@@60CycleHumcast yes it would, lol. I would go the effortless route and use the cheaper bridge mounted B Bender and a wiggle stick. Might actually have a new invention if you create a B bending wiggle stick, 😂 lol.
(The B.B. Wiggle Stick)
In the manual they forgot to mention how to connect the pickups to the switch. It's easy, but if you forget to connect them you will have no sound! :)
I dont worry about ends so much as level.
Dusenberg wiggle stick, please
That grain on the body needs to show through whatever finish you choose.
What values are the pots?
Any chance you could upload so we could download the instruction/construction manual? Is it really solderless? I've never touched a soldering gun or pistol or whatever they're called.
yep, the included pickups have clips attached, no soldering needed unless you want to use different pickups.
@@60CycleHumcast thanks. One more question: Do you know if the include pickups are the Roswell, the same alnicos as in the non-kit Jazzmaster/Jaguars sold by Thomann? If not marked you can Google the stock numbers on the backs. If so, those are alnico pickups.
I have a Bedazzler you could borrow :)
It honestly looks/ sounds great....80.00... deal!..is the body a bit smaller than a regular Jazzmaster?
It is yeah. CS Guitars channel were building one and showed it with a standard Jazzmaster pickguard. I presume he's the Colin Scott that Ryan refers to in this video.
Gods be praised! the upper lip is dissapearing again!
Much better with the short beard!!!
Hi Ryan,
Has the body already been grain filled just a wondering?
You should carve a brazilian "carranca" in the headstock. Maybe you won't win but it will scare away the evil spirits.
BATWING HEADSTOCK
I would put a horseshoe Bigsby on there.
Are the pickups Roswell or something else?
Hmmm.... alright, now who's going to post a video that compares this $79 kit build to some of the other kits out there that are $250?!
How much does the jazz master $79 guitar weigh? Thank you
I like this guy and what he is all about. Be my friend please.
The shine is from sanding sealer. You’ll need to sand before applying finish.
This is a good tip.
@@60CycleHumcast thanks, I have done a ton of kits and even documented a few on my channel. They’re fun but do require a bit of work.
@@60CycleHumcast looking forward to seeing what you do with it.