Aillio Bullet Deep Cleaning
Vložit
- čas přidán 7. 07. 2020
- A clean roaster is a happy, productive and safe roaster. Here's a step by step tutorial on how to give your Aillio Bullet a good cleaning. With a few cleaning supplies and a little bit of effort, your Bullet can shine from the inside out.
Aillio Bullet
www.sweetmarias.com/aillio-bu...
Cafiza Powder
www.sweetmarias.com/urnex-caf...
www.sweetmarias.com
Instagram: / sweetmarias
Facebook: / sweetmariascoffee
Twitter: / sweetmarias
Sweet Maria's Coffee Library: library.sweetmarias.com/
#AillioBullet #HomeRoasting #CoffeeRoasting
The impeller fan may have had an improvement since the video was made - you can use the long handle H2 0x60 supplied with the Aillio and loosen/ tighten the set screw of the impeller fan from the top. One of the fan blades has a moon shape cutout to allow the Allen wrench through the fan housing. It’s aligned with the set screw so align it to the exhaust port to use it. It’s way easier than using the L shaped Allan wrench. I’m super grateful for the video- it’s clear and quick- thanks for making it.
I have made a from panel support available for use when cleaning the Aillio Bullet. It includes a place to store the front panel screws.
Simple green works great it also cleans bongs really well
I needed this. Thanks!
I've been playing with the popcorn while for a while and really wanted to take the next step into seriously roast at least in lb batches. This machine has definitely caught my attention.
Thank you so much for the video my bullet is needing some tlc and this video gives me confidence to take on the task (: thanks
Note that it's very easy to put the impeller fan back too far in or too far out. It is wise to do a test afterwards without coffee
I would use a food safe cleaner like tabz for the inside of a drum roaster. I put simple green on greasy engines.
does the drum of any other part ever need cleaning? is it possible/advisable to ever remove the drum for inspection? what about the controller area and it's cooling fan and vent holes?
What about the gap beneath the drum. Do we have to clean it? BTW, thanks for video.
About how many roasts do you get between these deeper cleanings? Thanks for the video.
Hi. What size allen key did you use to remove the impeller fan?
hello can you tell me I would like to know the size of the drive sprocket and belt. Thank you very much.
So, I own a bullet and the bearing of the drum is stuck to the face. Do I give it a stab and get it out?
Hi there,
Should you still clean the newer IR sensors?
What is your cafiza solution ratio
Does the bullet have a dual drum design?
2:54