So I recently started searching for a TH -400 to tear down & learn first hand. Not finding much out there. Shawn,you seem to find them all the time. Here in Johnstown ,PA. 15902,not having much luck.🥺
I been watching your channel religiously for about two weeks I'm currently building a turbo 400 hundred for my 64 El Camino that I did a Fram off restoration on it has a 454 pushing right in the ballpark of 600 hundred horse so the upgrade I'm doing to the Transmission is a Torrington at the rear of the case a case saver and a heavy duty intermediate snap ring witch I got all of those ideas from your channel the details you offer are very helpful like guiding a little bit off the top of the case saver so it dose not come into contact with the drum good observation details like that are what count keep up the good work I'll send you a picture after I get it together thanks again for getting back to me I might have more questions I want to get it right the first time I'm to old to keep dropping that Transmission out by myself in my car port lol any have a great evening
I just picked up a TH400 short tail yesterday that's been sitting in a garage for 38 years from the original owner. And I'm excited to tear down and rebuild my first transmission
A very big thankyou Sean for imparting your extensive knowledge on all of us th400 enthusiasts. Big kudos to you sir all the way from here in Australia 🇦🇺 🤙🏽
I found your channel back in the spring and subbed back then and click the like all the time. Not only are your vids informational, Just listening to you talk I feel you could be a neighbor I could get along good with. Keep em coming friend!
Long time subscriber here Sean. Leaning lots from your vids and generally enjoy listening to you ramble. Will try to slam the like button more often. I get lazy and forget. Keep up the good work. Cheers
Hi Sean I installed a case saver and left out the 2nd gear band I removed the the accumulator in the valve body and plugged the apply hole do I need to replace the accumulator piston in the valve body ? Rich from Ontario Canada
i would like too know the part number of the super snap ring? i thought transgo kits come with that ring? i went too there site, it is not availible by it self that i could see. so if you have a provider for them that would be great..thanks troy
I was going to ask him a similar question but I found the answer looking that part online to order it myself since i want to keep the band in....the one he has fits all th400 plus the early 4l80e up till I believe 98. I remember seeing a different part # for the 4l80es 98 and newer...looked the same online pic but must have a slightly different design. I didn't pay a whole lot of attention to that as mine is a 70 th400 and the first part I clicked on just said it was for older 4l80s then the more I found the more clearer the description got. Hope this helps.
So I recently started searching for a TH -400 to tear down & learn first hand.
Not finding much out there.
Shawn,you seem to find them all the time.
Here in Johnstown ,PA. 15902,not having much luck.🥺
I click the like button as soon as it pulls up the video.
Thanks for all your knowledge and help your Chanel is very helpful
Glad to help!
@Mountains Garage hey I gave a when you install a case saver dose all of that hardware go away all the way up into the valve body like all of it
I ment I have a question
I been watching your channel religiously for about two weeks I'm currently building a turbo 400 hundred for my 64 El Camino that I did a Fram off restoration on it has a 454 pushing right in the ballpark of 600 hundred horse so the upgrade I'm doing to the Transmission is a Torrington at the rear of the case a case saver and a heavy duty intermediate snap ring witch I got all of those ideas from your channel the details you offer are very helpful like guiding a little bit off the top of the case saver so it dose not come into contact with the drum good observation details like that are what count keep up the good work I'll send you a picture after I get it together thanks again for getting back to me I might have more questions I want to get it right the first time I'm to old to keep dropping that Transmission out by myself in my car port lol any have a great evening
Shawn your videos are very informative keep up the great work!
Thanks for watching and commenting!
I just picked up a TH400 short tail yesterday that's been sitting in a garage for 38 years from the original owner. And I'm excited to tear down and rebuild my first transmission
Thanks for the help with the rebuilding process!
Thx Shaw. One of your earlier vids has got me looking at early 2000s Harley's. Got a 100th anniversary road king to check out
I am casually looking…
A very big thankyou Sean for imparting your extensive knowledge on all of us th400 enthusiasts.
Big kudos to you sir all the way from here in Australia 🇦🇺 🤙🏽
I found your channel back in the spring and subbed back then and click the like all the time. Not only are your vids informational, Just listening to you talk I feel you could be a neighbor I could get along good with.
Keep em coming friend!
Thanks!
Long time subscriber here Sean. Leaning lots from your vids and generally enjoy listening to you ramble. Will try to slam the like button more often. I get lazy and forget.
Keep up the good work.
Cheers
Very informative as usual thanks Mr for sharing your knowledge..
Subscribed.... liked..... let everyone know. Thanks for the video!
Watching from the uk. Already hit the like. Keep up the good videos.
Hi Shawn,
Thanks for the interesting video.
One of your loyal 5000,
Ross
Great info but was wondering if you can use the fti case saver with the ck trans brake valve body
Yes no reason I can think of not to.
Comment to help my transmission guru!
Thanks!!
👍👍👍
Hit Like for ya
Thanks!!
Subbed and always like . Keep being you .
I have CZcams premium. Always forget there are ads.
Hi Sean I installed a case saver and left out the 2nd gear band I removed the the accumulator in the valve body and plugged the apply hole do I need to replace the accumulator piston in the valve body ? Rich from Ontario Canada
i would like too know the part number of the super snap ring? i thought transgo kits come with that ring? i went too there site, it is not availible by it self that i could see. so if you have a provider for them that would be great..thanks troy
which of your videos shows the difference cases.....webbing,thicker,etc. thx
Where do you get the super snap ring? Part number? Thanks….
I'm a sub
Building a street th400 650hp level, do you think case saver is necessary
Will the sonnax work in a 4l80E trans ?
I was going to ask him a similar question but I found the answer looking that part online to order it myself since i want to keep the band in....the one he has fits all th400 plus the early 4l80e up till I believe 98. I remember seeing a different part # for the 4l80es 98 and newer...looked the same online pic but must have a slightly different design. I didn't pay a whole lot of attention to that as mine is a 70 th400 and the first part I clicked on just said it was for older 4l80s then the more I found the more clearer the description got. Hope this helps.
How could I send you some parts I dont need?
Oh boy, exciting! Email me at smountain1@roadrunner.com