DIY Concrete Project | Diy home improvement projects | diy projects for home decor

DIY #Concrete Project, Diy home improvement projects, #diy projects for home decor
Concrete frames for windows and doors are an essential part of any building's structure. They provide a sturdy and durable support system for windows and doors while also adding to the overall aesthetic appeal of the building. If you're looking to mold cement for windows and door concrete frames, then this article is for you! In this step-by-step guide, we'll take you through the process of molding cement for windows and door concrete frames.
Step 1: Gather Your Materials
Before you start molding cement for windows and door concrete frames, make sure you have all the necessary materials. You will need:
Cement
Water
Sand
Concrete mix
Measuring tools
Molds
Trowel
Level
Reinforcement bars
Step 2: Prepare the Molds
Start by preparing the molds for your windows and door concrete frames. Use the measuring tools to ensure that the molds are the correct size for your windows and doors. Apply a release agent to the molds to prevent the cement from sticking to them.
Step 3: Mix the Cement
Mix the cement with water, sand, and concrete mix in a large container or mixer. Use the appropriate ratios as per the instructions provided by the manufacturer. Make sure the mixture is well blended and free of lumps.
Step 4: Add Reinforcement Bars
To add strength to your concrete frames, insert reinforcement bars into the molds before pouring the cement. Make sure the bars are securely in place and don't touch the sides of the molds.
Step 5: Pour the Cement
Using a trowel, carefully pour the cement mixture into the molds. Fill the molds up to the top and ensure that the cement is level using a level tool.
Step 6: Smooth the Surface
Once the cement is in the molds, smooth out the surface with a trowel. This will help to ensure that the finished frames are level and even. You can also use a small brush to add some texture to the surface if you wish.
Step 7: Allow the Cement to Set
Allow the cement to set and dry for at least 24 hours before removing the molds. You can speed up the drying process by using a fan or heater to dry the cement.
Step 8: Remove the Molds
After 24 hours, carefully remove the molds from the cement frames. Be sure to take your time and not rush this step, as you don't want to damage the finished frames.
Step 9: Finishing Touches
Once the molds are removed, you can add any finishing touches to the frames. This could include sanding any rough edges or painting the frames to match your building's color scheme.
Conclusion:
Molding cement for windows and door concrete frames is a straightforward process that requires a bit of patience and attention to detail. By following these simple steps, you can create durable and attractive frames for your windows and doors that will last for many years to come. With practice, you can hone your skills and create more elaborate designs for your building's exterior.
#DIYConcreteFrames #CementMolding #WindowFrames #DoorFrames #ConcreteStructures #BuildingDesign #ConstructionTips #BeginnerDIY #HomeImprovement #MoldingTechniques
Handmade DIY Tools - • DIY Tools: Tile Settin...
Paano Gumawa ng Rodela with Rubber - • Paano gumawa ng PVC Ro...
Paano Gumawa ng Concrete Hamba Moldura Pattern - • Paano Gumawa Concrete ...
Paano Magbato ng Halo ng Palitada (Techniques) - • How to Plaster Walls w...
Mga Gamit sa Palitada - • Palitada Tools: Iba't ...
Paano Magkabit ng Moldura ng Bintana - • Moldura Cement Precast...
Paano Gumawa ng Pattern ng Moldura (Yero) - • DIY Making Cement Moul...
Paano Mag Kanto ng Palitada sa Pader at Bintana - • Plastering Window Corn...
Paano Mag Palitada (Step by Step Tutorial) - • Paano mag PALITADA ng ...
Paano Gumawa ng Window Grills (Tubular) - • Welding Tutorial Windo...
Paano Gawin ang Moldura (Bintana) ng Mano Mano - • Paano Gumawa ng Moldur...
Paano Magpahid ng Skimcoat - • How to Apply Skim Coat...
Paano Magkabit ng Precast na Moldura (Step by Step) - • How to Make a Beautifu...
Paano Magkabit ng Tiles (Tiles Setting) - • How to Tile Settings D...
Paano Gumawa ng Precast na Moldura - • DIY Concrete Project |...

[@AmazingHomeDIY]

Masonry Work, Cement and Sand, Plastering Job Playlists 👇👇👇
bit.ly/CementWorksDIY

[@MRDJJOSE]

Nice info kabayan..hindi lahat ng tao marunong nyan..kaya salamat sa pagtuturo

Kỹ thuật hây quá đẹp bạn ơi cảm ơn bạn chia sẻ hây quá

[@ferdzdelrey1257]

Salamat sa pagtuturo pag gawa ng moldura bro. malaking tulong ito.

[@AngelHeavenvlog]

Salamat po sa idea malaking tulong po yan sa amin manood

[@mademoisellebelletvshellah]

Grabe Kuya sobrang Galing mo po... kakaiba un talento mo.keep sharing po kuya.keep safe.

[@AmazingHomeDIY]

salamat po sa magandang commento!

[@janetestradabasilio8194]

Ang galing mo naman Sir. God bless po. thanks for sharing

[@printablepngphotoframes8946]

salamat po sa tutorial ninyo very informative!

[@elfaraonll5795]

isa kang henyo....bro...amazing....

[@nastonhamad8526]

Good creating🖒🖒🖒👏

[@indaybudayandfamily2421]

Maraming salamat po Sir 👏 God bless 🙏

[@jackatis7842]

Creative 🖒

[@marcamparo9900]

Yowns. Kuya Lods talaga

[@jonalynvillaflores8874]

Luma ng tugtugin yan.. Paggawa m ng designed nyo. Panahon p n lupon kupong yan. Pagaralan nyo ung Mga latest. Ngaun... D lng kau ang marunung nyan kami din magaling Jan.

[@AmazingHomeDIY]

Salamat po sa inyong comments, next video try ko ibang design 🙂, God bless po 🙂!

[@naceradda7369]

Bravo AMIGO 👍

[@jojitvargas6193]

Wow Ang galing nmn brod

[@jeneligo2614]

Request ko lang pagkatapos mailagay ang bakal lagyan ng semento sunod Ang screen para iwas sa basag.

[@HannahAdventures]

Angaling mo tito!

[@cookpinoy]

Matagal din pala no pro ok maganda

[@kiangreyenriquez6959]

salamat po sa mga tips boss! new supporter here keep it up boss!

[@AmazingHomeDIY]

salamat anak!

[@mhaikalvlog]

good result yes

[@ngo9688]

Good job👍💯

[@MilyonaryangPobre]

Yes po tamsak done full watching.wow Ang galing nyo po.gumawa nyan.god bless you.

[@AmazingHomeDIY]

Salamat po mam! c u po palagi!

[@AngelHeavenvlog]

Hello po boss bait galing nyo nmn po

[@louellamadrid8265]

more videos pa po :-)

[@ms.agnesiab.4146]

galing ng skills nyu kuya..

[@AmazingHomeDIY]

salamat po madam!

[@trenseni]

Inspiratif...

[@wasidin8965]

Nah gini caranya buat vidio tu yg rinci ,bahan2nya apa aja ,biar parA pemula paham

[@enriquejrvaldes9718]

Magaling ka boss 👍👌💯🙏🇵🇭🆗

[@prasannasanjeewa8674]

Good brother

[@alhachlibou3lam94]

عمل جميل ورائع جدا

[@elikysa930]

Tip ko Lang boss para maganda ang kalabasan Ng muldura o precast wag mo madaliin ang pag puro tiyagaan mo muna ang mga Kanto para Makita na pantay lahat para maganda ang finish product.just saying
👍 Good job.

[@AmazingHomeDIY]

Salamat po sa advice boss!

[@tharushreeram2986]

wow

[@daniaperez9284]

Desde Cuba te veo interesante s trabajos

[@AmazingHomeDIY]

¡Muchas gracias!

[@unlockedrahul]

OOOOO

[@MyKitchenRecipesbyRagini]

Nice upload..

[@AmazingHomeDIY]

Thanks for visiting

[@salpanettieri3115]

What are you using for cement/concrete?

[@josemacasil2270]

Napakaraming hagod . . . Dapat iba ang traha para sa puro. Halatang bagito pa sa pag gawa ng moldura.

[@AmazingHomeDIY]

salamat sa panonood boss

[@vickybarola3377]

Pwede po bang mag pagawa ng pattern ng moulding para sa bintana

[@fritzelmarieisona3727]

boss baka pd makahingi ng ganyang design moldura patern😊 tnx idol

[@petervirrey7160]

madumi boss.

[@AmazingHomeDIY]

ganun talaga boss sa construction 🤣

[@MRmzadz]

Did you put only cement and gravel?

[@josephtape3653]

Ka desgn pno po b gumawa ng patern ng muldura at sukat sa paggawa ng muldura.

[@Tags-Tv]

Ako nahihirapan sa style Ng paggawa,d perfect ung grooves,o kanto me Anu Anu pa,

[@rosielynflores2724]

Hi po halimbawa meron na sa terrace precast concrete pwd paba un matanggal at mailipat ng hnd masisira?slamat po f msagot

[@janetestradabasilio8194]

tamsak done

[@AmazingHomeDIY]

Thanks po!

[@doratayag2928]

Paano po gumawa nang andle mondura sir ano size

[@doratayag2928]

@@AmazingHomeDIY saan po nabibili un andle nang mondura

[@aristotlelim8966]

magkno po aabutin kng magpapagawa ng gnyan

[@Mommyandaxel]

New subscriber here! 😍

[@AmazingHomeDIY]

Slamat po!

[@BoyetTek-ing-ot1gy]

❤❤❤💯💯💯💯👍👍👍

[@edwinaquino2886]

Ilang oras ginawa yan boss kalahating araw yata

[@antonianacion4705]

Idol. Pabili. Nman. Pattern. Mo gagamitin. Ko sa. Bahay. Gagawa ako ng mondura. Idol

[@akosikolokoy1372]

Med yo umaalon amg iba sir dapat pvc gonamit mo...

[@naceradda7369]

Fisidados amigo prfisonalo amigo d'El algeria a micsico

[@daniloalberto1524]

Mag kano po ang per bintana ng moldura 120×120 ang sukat

[@CasterbalTV]

*Sir, na try nyo na po ba na salahin (seive) ung sand para mas maliit at wlang bato? Mas ok po ba un? Sana mapansin nyo po ako*

[@AmazingHomeDIY]

opo sir dapat bistay na buhangin para di bumara sa molde. salamat din sir sa pagsuporta s channel

[@arieslacuesta3287]

Pano magmuldura sa mga posted ng bahay

[@ninjablue_rmc8591]

Sir ano ang sukat at paano mag gawa ng inyong pang hagod sa moldura

[@annelyndelariarte5481]

Bos magkano pagawa sayu Nyan San po location nyu

[@unsopken0623]

Ano tawag sa tools na yan para mag mould?

[@AmazingHomeDIY]

moldura pattern po

[@elizamvb1296]

San po location niyo? Pwede po magpagawa?

[@louellaenriquez8344]

pa shout out po sir 😊😊😊😊

[@AmazingHomeDIY]

@elang enriquez hello po, salamat sa supporta!

[@riodelblogs7942]

Dre pasilip ng bahay kobo ko

[@reynantepotenciano1817]

Sir paano gumawa pattern ng door jump

[@user-yf6xx2nz5l]

Old Model na Yung Pre-Cast na Muldura na ginagawa mo

[@AmazingHomeDIY]

basic lang boss next time modern naman salamat po sa panonood

[@AmazingHomeDIY]

MOLDURA MANO MANO rekta sa bintana - czcams.com/video/HiN043gm528/video.html

[@ThanosVlogs40]

Boss ubos simento mo dyan dami mong error 😅 daming error pero ok lang maganda nman tignan

[@AmazingHomeDIY]

may nakasalo sa ilalim walang aksaya boss 😁

[@reynanquino1160]

Boss baka pwede palagay ng sukat ng patern

[@dextertancogo4786]

Plastic type ba yan boss..yang cut design molder mo?

[@AmazingHomeDIY]

makapal na pvc boss

[@chrismore9198]

Bos may mabibilhan ba Ng ganyang gamit mo pangmoldura design..

[@AmazingHomeDIY]

boss bigyan ko na lang po kayo... bibili lang po ako ng materyales...pang give away ko po 🙂

[@dexteragtulao5763]

Paano po ang pag ka it nyan po sa binta

[@AmazingHomeDIY]

meron po akong video kung paano kinakabit ang precast na moldura.. click nyo po VIDEOS jan sa channel salamat po!

[@agoynoy3289]

Boss pWeding mAhingi aNg pAttErn at tAmAng sUkat ng mOLduRa mo sA vediO nA ito..sLmAt boss..gOdbLess..kApE sAfE lagE sA wOrk

[@AmazingHomeDIY]

yes boss iupload ko dito sa channel

[@pabloflores4387]

Sir pahengi ng patermo,? Salamat

[@BoyetTek-ing-ot1gy]

Magkano po bayad sa isang bintana boss

[@alfredomaisog329]

Anong sukat ang yong patern?

[@berambai]

how to install it?

[@AmazingHomeDIY]

czcams.com/video/hENcxg3FyqM/video.htmlsi=tYwmPBknCo9X17tW

[@bebecachorrito]

Pues aun le falla, 😏

[@ramilcahiles4148]

Ginawa MO Lang ba yang pattern MO boss. O nabibili yn sa hardware

[@AmazingHomeDIY]

ginawa ko lang po ang pattern may video po ako kung pano gumawa ng moldura pattern. salamat po sa panonood

[@michaelcuello8907]

kong magpagawa ako ng pattern ng moldura magkano po

[@AmazingHomeDIY]

Hindi po ako nagbebenta sir... wait nyo po ung video po magtuturo po ako kung paano gumawa ng pattern ng moldura... click nyo po ung notification bell. Thank you po!

[@yhobheespiritu3668]

Ano ba Yan ang tagal nmng mabuo

[@samahangilokanomindorochap4647]

Sobrang tagal ng proseso may mali sa diskarte mo boss kaya laging nasisira kapag hinahagod

[@AmazingHomeDIY]

salamat po sa panonood

[@adrielmatthewsantos5142]

Sir san area niyo pano po kayo ma contact

[@louiepesquera3059]

Ang pangit ng kanto Hindi matulis at baluktot boss dapat gumamit ka din ng rodilita para pag kanto man lang at inayos mo din para wlang masabi ang nanunuod sayO ok Naman sa gawa mo

[@AmazingHomeDIY]

salamat sa advice!

[@JOSSIE-f4x]

Bro kulang pa hindi maganda ang kantuhan mo nakikita ko ang pag gawa mo..kahit yung gunawa mong rekta sa pinta sira ang kanto ..slam mo ayaan ang madidilip sa iyo kantuhan sira ka duon

[@vosajvonabat7835]

Palpak gawa mo. Madumi

[@AmazingHomeDIY]

ok pang boss, salamat sa panonood

[@BoyetTek-ing-ot1gy]

Magkano po bayad sa isang bintana boss