Thank you so much for being so generous with your knowledge and skills! May God increase you in all all areas of your life! May your channel grow to millions!
Mercy you do alllll❤❤❤❤ I was stalking your page to see it first when you post. And just when I drifted, boom😂😂😂😂 here you are. I'll be making this soon and I will sure tag you.❤❤
Thank you so much for this. I've been searching for instructors that use Natalie Bray's method for a while now and I couldn't get. This is such a relief. I'm so happy to learn from you. Thank you
This is perfect. You are the first person I'm seeing that is using this actual stoned mesh to illustrate it. Please how do you sew the mesh without the needles breaking? Is those stones detachable? Or there is a way around it? Kindly answer please. Thanks.
Thank you so much mercy ❤ I literally started following you last week and I have learnt soo much already😍😍😍 God bless you 🙏🏻🙏🏻🙏🏻can you please make a trouser tutorial for me
You absolutely slated it 👏🏽. Please what’s the weight of the fusible interfacing that you used to pad the bust area? I’m trying to order on Amazon/Ebay but I’m seeing different types.
It’s a heavy weight fleece fusible interfacing . For brand check the Pellon fusible fleece . That’s the one I always get but at Hobby lobby . You should find it on Amazon too
Hi there Mercy, I'm grateful to have come across your channel, and I've been hooked. One question pls, how's the bustier looking firm and round. I mean the types of interface you used? Thanks and God bless ❤️
Yes it will. It can still be cut on fold. When connecting to the chest line, make sure it tapers off well. And you won’t have a problem cutting on fold. I hope this helps.
Thank you so much for the tutorial ❤but I have a question the feesible fleece interfacing is it the same thing as warden here in nigeria ?thank you❤❤❤❤
I usually don’t tighten the over bust, if there’s a yoke . In this case I did just a little tightening, most because the yoke fabric had a lot of stretch
This is such a neat job, and the fit was perfect! When contouring the underbust, is the 2cm intake a standard measurement, or is that value to be increased for bigger sizes? Also, I sent a Hobby Lobby question to your IG dm...🙂
Thank you! The 2cm is not standard . I usually use 1cm -2.25cm max. This is based on the bust size . Smaller bust for the least and so on . I’ll check my dm.
To remove the stones, I ironed around the seams, placed the iron on it for a few seconds and then I used a small metal ruler to scrape out the stones .so basically the iron melts the glue under the stones which makes it easy to come off
It looks great, but you rushed the video. Please slow down and explain. We will sit an hour to watch and understand rather than have a 30-minute video without understanding.. First time here.
Wow
You did great
Thanks so much
this is exactly what veekee did no difference, i love it
Thank you ♥️
Very detailed tutorial.
Love the process video❤
God bless you
This is the best tutorial I have seen
❤️
You did excellently. Please share the process for padding your bustier. I love the effect as seen in this tutorial. Thank you
Thank you . And noted!
Such a good, tutorial well explained. I wish the video is downloadable
You are such a great leader... thank you so much for this tutorial..It is wow😘....may God continue to increase your knowledge...I love you
🙏🙏. You’re welcome
Thank you. I appreciate your teaching skills. You are an excellent teacher.
Thank you so much ❤
You smashed it
Wonderful job.. excellent. The replica and the original are exactly alike. .
Thank you very much!
So detailed, GOD BLESS YOU DEARLY 🙏
25:59 You did great. Perfect. I'm sure Veekee James will be so proud. Good job ! I love it. 👍🏼
Haha ! 😄Thank you 😊
@LuxuryDesigns-ni7ky it’s medium weight
You did great you've cleared my doubt in the flounce part with your choice of horse braid
Glad I could help!
Thanks so much for sharing this knowledge! I pray you continue to wax stronger. Amen
You are so welcome
You did a neat job
Your hand work is very good, thanks for sharing the process.God bless you more sis.
🙏♥️
I am here from TikTok. Thank you for sharing
Thank you for stopping by . And I hope you stay ♥️♥️🤗
I followed you from your Pinterest acc. Thank you for sharing your knowledge. God bless you ma'am 💕
Glad to have you here 😊🤗
It’s your soft voice for me😍 Thank you for the tutorial.
🤗😊. You’re welcome !
I love the built- up neckline. This mature woman likes to hide her neck.😊
Yes!! Me too 😊
Wow! I enjoyed this Tutorial 👍
Glad you did !
I wish I could show you the dress I made from this youd be proud
I would love to see! 😊 please share via my email or IG( links in my bio) and well done👏👏
@@mercyadamsinseams okay I’ll do thattt
Absolutely good, neat sowing 👍
Thank you
U really got it. Bravo!
Thank you!
Lovely,thanks for the illustration
My pleasure 😊
Awesome, awesome...... U always blow my mind...
Thank you!
This very beautiful 😍
Thank you 🙏
I love all your works😘
Thank you!
Beautiful
Thanks so much
Great job
Thank you.
Thank you so much for being so generous with your knowledge and skills! May God increase you in all all areas of your life! May your channel grow to millions!
Aww!! Thank you so much. You’re so kind and Amen 🙏
a big thank you to you
Made mine and it came out perfect
Wish I can send you the pics❤
You’re very welcome! Would love to see 😊. You can send it via DM on my IG
You did amazing
Thank you!
Mercy you do alllll❤❤❤❤ I was stalking your page to see it first when you post. And just when I drifted, boom😂😂😂😂 here you are. I'll be making this soon and I will sure tag you.❤❤
😃 . Sorry I kept you guys waiting. It took forever to upload yesterday, hence the delay. Pls tag me! I will so love that ♥️
Amazing tutorial ❤. Thank you 😊.
Glad it was helpful!
Wow this is amazing 💯really learnt alot😊😊
Glad it was helpful!😊
Thank you so much,this is always what i wanted.
You’re very welcome
Thank you Mercy Adam. You are my genius. Just subscribed 🥰
😊❤ Thanks for subbing!
You did a wonderful job. 😊😊
Thank you! 😊
Please can you make a tutorial on how you cut and gum your warding for the bustier?
I did already in this same tutorial
You did great! 👍👍
Thank you! 😁
You're amazing!!! Thanks a lot!
You're welcome!
@@mercyadamsinseams ❤
I just started following you and have learnt a lot. You are amazing and a great tutor. Keep up the good job
Thank you so much ♥️
Just subscribed
Very detailed and neat job.
Love your voice.
Thank you so much 😊♥️
Pls kindly scare the padding process. Thanks. Your work is really great. Learnt a lot
U did great dear. More grace♥️
Thank you so much 🤗
Superb 😘
Thanks 🤗
Thank you so much for this. I've been searching for instructors that use Natalie Bray's method for a while now and I couldn't get. This is such a relief. I'm so happy to learn from you. Thank you
Thank you! And glad to have you here
Very beautiful. You did well😍
Thank you so much 🤗
This is perfect. You are the first person I'm seeing that is using this actual stoned mesh to illustrate it. Please how do you sew the mesh without the needles breaking? Is those stones detachable? Or there is a way around it? Kindly answer please. Thanks.
I like the dress ,the pettern is lovely .try to slow down .❤
Thanks you
This is beautiful 😍
Thank you!
This is soo wonderful ❤
Thank you ♥️
God bless you, you are really damm good.
♥️♥️
Well detailed 💯Thank u so much ma …. Please is the 2cm for the underbust shaping for all sizes ?
This is perfectly beautiful,thank you so much for all you do here. I have really learnt a lot 😊
Thank you so much 🤗🤗
@@mercyadamsinseams ❤
Thank you so much mercy ❤ I literally started following you last week and I have learnt soo much already😍😍😍 God bless you 🙏🏻🙏🏻🙏🏻can you please make a trouser tutorial for me
You’re welcome. And noted !
Beautiful... Please can you make a tutorial on off shoulder princess dart?
Thanks 🙏 and noted
Thank you so much sweet ma 🥰🥰😘🥰💝
Welcome 😊
Thanks for this tutorial it really helped ma but pls was this hand stitch or down with the machine
Yes it was
This is impressive, thank you for sharing your knowledge.
Please can U show me how u did d body measurement
Is the 2cm you took away from the dart on the under bust line constant for all sizes
It’s not. It usually starts at 1cm to 2.5cm and max 3cm.
Why can't we download it?😢
Thank you so much ❤
You're welcome 😊
Great work but those of us without mannequin what do we do about the drapes
We'll details, ❤
This is absolutely gorgeous ❤
Please how was the flounce added, was it hand stitched?
Hi. Thank you! Yes it was hand stitched
@@mercyadamsinseams thank you so much
You absolutely slated it 👏🏽. Please what’s the weight of the fusible interfacing that you used to pad the bust area? I’m trying to order on Amazon/Ebay but I’m seeing different types.
It’s a heavy weight fleece fusible interfacing . For brand check the Pellon fusible fleece . That’s the one I always get but at Hobby lobby . You should find it on Amazon too
@@mercyadamsinseams Thank you so much 😊
Hi there Mercy, I'm grateful to have come across your channel, and I've been hooked.
One question pls, how's the bustier looking firm and round. I mean the types of interface you used? Thanks and God bless ❤️
Hi. Thank you so much . I used fusible fleece interfacing(wadding)
@@mercyadamsinseams Thank you ❤️
Thanks for this.
If one is adding ease to the neckline for the builtup neckline, does this mean the center front cant be cut on fold?
Yes it will. It can still be cut on fold. When connecting to the chest line, make sure it tapers off well. And you won’t have a problem cutting on fold. I hope this helps.
@@mercyadamsinseams ok, thanks very much
Thank you so much for the tutorial ❤but I have a question the feesible fleece interfacing is it the same thing as warden here in nigeria ?thank you❤❤❤❤
Yes, it is
This is soo beautiful! ❤ Please what did you use for the bust padding. For it to give the standing effect
Thank you! It’s a fusible fleece interfacing or wadding.
beautiful. i'd appreciate if you can do avideo to explain contouring ( 25% 50% 75% 100%)
thank you
I do not use that method.
Do you do yoke tightening? Is it necessary for all bust sizes
I usually don’t tighten the over bust, if there’s a yoke . In this case I did just a little tightening, most because the yoke fabric had a lot of stretch
Nice job ,but l have a question on the pattern drafting did you do the contouring at the shoulder or is just the dat that you took
Thank you. If you watched through i mostly did the contouring on the darts . I took only 1cm over the bust( around chest area)
Wonderful.... please what interfacing did you use to cover the fusible fleece ...
Used the same, only added an extra layer around the bust area
This is such a neat job, and the fit was perfect!
When contouring the underbust, is the 2cm intake a standard measurement, or is that value to be increased for bigger sizes?
Also, I sent a Hobby Lobby question to your IG dm...🙂
Thank you! The 2cm is not standard . I usually use 1cm -2.25cm max. This is based on the bust size . Smaller bust for the least and so on . I’ll check my dm.
Pls, did you pipe the neckline?
I did not
Y can't I download it
Please what type of interfacing did you use for the bustier and the flounce
Crinoline for the flounce and wadding but the bustier
Please how many yards of stoned net did you used, also how did u remove the stone
I used 3.5 yards
To remove the stones, I ironed around the seams, placed the iron on it for a few seconds and then I used a small metal ruler to scrape out the stones .so basically the iron melts the glue under the stones which makes it easy to come off
How did you sew the mesh with the stones on????
I removed the machine foot .
How did you sew the stoned mesh so easily?😩
I removed the footer
Which footer did you use
None.. took the entire foot off and just sewed through
You have done great. Pls, too much of fast forwarding such that a beginner will not be able to cash up fast. More grace.
Oh sorry about that. I’ll take note of your feedback. Thank you.
It looks great, but you rushed the video. Please slow down and explain. We will sit an hour to watch and understand rather than have a 30-minute video without understanding.. First time here.
Pls I need a class
Was good but Sis you were so fast .can you please Go through it a bit slowly. Thank you
Sorry about that
Did you break the stones first along the allowance area before sewing?
In some parts I did. But mostly just removed the footer
Thanks Alot
You're welcome
Your location ?
United States
توب توب
I saw your work on instagram, congratulations
Can I know what do you use to make your videos? Thank you
Hi. I use my iPhone (13 ) and a couple of light panels
scrupulous!