1955 Fender 5E9 Tremolux in near MINT Condition.....Wear a Bib !!
Vložit
- čas přidán 7. 09. 2024
- This video features the nicest, completely original 1955 Fender 5E9 Tremolux that I have ever seen. It's the first year of issue for the Tremolux and this one is serial number is 00060, so you do the math. The owner has asked for a concealed (in original cardboard covers) replacement of all electrolytic capacitors, testing of the non-polar caps and resistors, testing of the original Jensen speaker, and biasing of the 6V6 output tubes. Following all the repairs, we will have our traditional audio demo, but at higher fidelity than previous videos. Also, the demo will be done with single coil pickups, just as Leo intended.
In addition, we will open some great Christmas gifts from generous viewers, and have a special Part 2 video showing how to build your own amp chassis stand (with blueprints), followed by a detailed evaluation of a commercially available chassis stand from Mojotone.
If you enjoy advertising-free videos like this one, be sure to SUBSCRIBE to our channel and consider becoming a Patreon patron at: / uncledougsvintageamps or making a PayPal contribution to: dldcam@aol.com.
Here is the link to the design drawing for the homemade amp chassis stand: app.box.com/s/...
Here is a link to the Mojotone stand evaluated in the Part 2 video:
www.mojotone.c... While you're there, take a look at their really nice amp kits, pickups, chassis, etc.
The ‘scratch and sniff asbestos sheet’ - you kill me, Unc! That amp’s a beauty!
Cough!....Snort!......Thanks, Ronny :)
Hey Unky it's me your favorite nephew Southbound Suarez.... Boy ya thought my Tweed was pretty? That Tremolux certainly has my '59 beat!
That amp certainly is a "Bute"! It sounds just like a Tweed should except for it did not have noise, hum or rectification.... It is so nice I am almost suspect! L.OL.
It looks like the cat is outta the bag (or actually is outta the garage and into the house) well the cats meow and the precedence is now for cap stuffing! I am doing it very often now. However I am pushing out the metallic can and then I open up the can by slicing it radially right down the middle. First ones I slit them on my lathe.... Too much work and while it is so precise , it doesn't need to be cut in half so perfectly. (I was trying to make the part as perfect as possible to minimize the hairline when placing both halves together. It doesn't need to be perfect under when it's stuffed under the label, ya never see the cut or seam.... Now I just use a Rigid tubing cutter instead. I remove the guts and drill out the ends along the edge of the rivet. My new caps go inside the old can with the negative all the way to the
Metal end with the lead threaded thru the hole drilled next to the rivet. I fill the void of that half with hot glue and then I slide the other positive end over the positive lead threading it thru the hole on the fiber disc next to the rivet. Add some more hot glue to the positive side and put both halves of the can together and stuff the whole can back into the paper. I roll the crimp back over after a light brushing of watered down fish glue or gum arabic.
Ok now that we have got the ecaps covered now we can work up a technique for those wax paper foil caps and the molded paper caps. I have a few ideas I've yet to try.
Ya know after I sent ya those pics of my shop and stuff, you mentioned how I had so much stuff crammed everywhere and how I needed a cradle like you. Frankly, I had already been contemplating a chassis stand. I even had pointed out the Mojo one to my snowshoe cat and other household pets before Christmas but my family never seemed to get the idea of what to get me , so they obviously rather be safe than sorry and felt it better to not get me anything. See how they look out for me!
So after surfing and browsing the Hoffman forum I saw some interesting posts with all types of ideas. For amp cradles and jigs... It got me motivated. I just happened to come across some arms that were adjustable and used for retail display of keyboards in a music store. I bolted them against the wall and now can hang my chassis off of the wall and now have more bench top landscape. Now I can clutter up with more stuff... The angle of the dangle is adjustable with pins and the arms can fold back when not in use!
I knew you had been flying multicopters but I never realized that you had assembled your own. I just figured ya had a DJI or something or another. What controller are ya flying? I have flown KK , Multiwii /Arduino with GPS , APM w/GPS , PIXHawk and all the various versions of beta flight F4 ect.....
You people are amazing !!!!! You are way above my pay-grade !!!!!
That's a beauty.
Nice nice job.
My son walks in from work and can hear this video playing says: 'You watching Uncle Doug?'
UD your voice is reknown around the world!!!
Kudos from Brisbane
I am flattered, Vinny. Tell your son "Hi" from all of us :)
No matter where you go, Billy Gibbons is always the coolest dude in the room,,,,,and then Unk Doug walked in.
@@karst41 Ah, shucks, K. Thanks ;)
I love how you "hot rod" those new caps into old cases. Very clever. The Mojo amp stand looks nice too. Maybe with one of those my wife won't gripe so much about me working on amps at her dining room table.
Thanks, GL. That would be a good excuse for buying one.
Just watched a Blue Glow video prior to this and he waxed poetic about his Mojo amp stand. Guess that means I need one as well!
@@thermionic1234567 I just watched that same vid too. It's a sign....
@@GL64 Let’s get out our credit cards!
I mean...the amp is amazing for sure...but that LAMP that guy made you!!! That thing is KILLER!
Beautiful amp and beautiful work!
Thanks so much, Ryan. I agree......it's a masterpiece.
Current limiter????
It's a beautiful thing. Every time I see these I wish I owned them all.
Join the club, JC :)
Uncle Doug, you are Professor Uncle Doug. Your attention to detail is amazing!
Thanks, Bob :)
Wow! I’m only 10 minutes in, but what a beautiful amp. Im sure both Joe Bonamasa and Mike Campbell are already circling 🤣
Their representatives were making obscenely high offers, but Jack insisted on returning it to the owner ;)
It's clearly been played a lot, but it looks like it's been hermetically sealed for about 60 years! Crazy! Someone deserves a lot of credit for the care taken of that thing.
Amen, Drew, especially after some of the rat-urine-encrusted nightmares we've worked on.
When I was a child in the early sixties one of my fondest memories was taking our black and white set “to the shop”. I loved the smell of solder and burnt Bakelite, still do. Thanks for educating me. Love ya from Portugal.🌎☮️❤️🇵🇹
Wow, Sandi, you really are an electronics enthusiast. Best of luck with your pursuit of continuing education in the field.
Uncle Doug, I ordered the Mojo Tone chassis stand and received it the other day. You may be happy to learn that they now have six feet installed on the base, four in each corner and two in the middle. it looks like they value your input because they have used your fantastic idea!
Thanks so much for the update, Paul. They informed me, after the video was posted, that they intended to add the feet.....and it's great to hear that they followed through. I respect them all the more for their willingness to heed constructive input.
i really like the paintings that your wife does the one in the background looks like jack at dinnertime i have 2 myself both rescues and they are my kids take care and God bless
Thanks so much, PJ. Bless you for your kindness to the kitties :)
Thank god the person that would pack tubes like that is the owner of this amp, but it shouldn't be a surprise with the condition it's in.
Amen, Queef :)
Not since my days in Great Lakes Naval Training school in ‘69-70 have I seen anyone go through a tube schematic in such detail. Great job. I’m currently trying to put back together a Magnatone M-15 from my youth. Not a restore, just a new cabinet and speakers for the original chassis . Your channel has been very valuable for tips and ideas & entertaining.
Thanks so much, Rocky. We're glad the video was helpful.
missed, what, a month without a new posting, but what a gem and contents overall. worth the wait.
Hour long videos like this take a couple weeks to produce, so one, or maybe two a month, is the best I can do, HP. Thanks so much :)
Since I used to be a cabinet maker.....I think I'll build that second Chassis stand that you demonstrated.....maybe I'll build two...one for me and one for my friend Vern who's helping me learn about the wonderful world of electronics.....
Best of luck with your project, Horst :)
That rocket ship looks like something that would have been in one of those cool old B-grade Sci-Fi movies from the 50's.
It does indeed, Simon :)
You have heaven for followers !!!!! Wonderful station !!!!!!!!!!!!!!!
Thanks, Blaser :)
Wow Uncle Doug. I am also 1955 vintage and wish I looked as new as that Tremolux. Great video!
Thanks, CA. You and me both ;)
Ditto!
Serial Number 353 survived the 2010 Nashville floods is still with me. Your video conclusively verifies that the tube chart is wrong on mine as well, which says 5U4GA too. I'll spare the story to keep this simple, short, and to the point (although it's almost painful to realize my heroes aren't perfect - the guy who takes care of my stuff has been quite an inspiration to me for a long time). It was my first great amp. Not only is there a 5U4 in there now, but has been since at least 2016 based on service-records. I have another destroyed 5U4 with corroded pins (I never threw out flood-damage) so this amp has probably been running the wrong rectifier probably for much longer, likely since before 2010. Evidently I got away with it. The heater winding obviously still works. Thank you as always for all you do.
You're welcome, Sean.
Uncle Doug startin' a trend in vintage-amp techin': bona-fide aesthetics. Cool stuff Uncle Doug, and that little Tremolux sure deserved it.
Thanks, John. Agreed :)
very skilled chordsmith there~ fills my heart with joy to sense the atypical~ hop in and swim~ no bib's needed~
Thanks, Jay.
No-- absolutely needed for bib action !!!!
Very nice video I really enjoyed watching this as I get to see what has been going on with my 1955 Fender Tremolux 5E9 EE #0077, I’ll be getting it back from the amp tech this weekend.
I'm glad you enjoyed it, ITC.
Om my God. If I didn't see it, I would have said that something like this simply couldn't exist any longer. Mind blowing.
Agreed, M. Glad you enjoyed it.
Marvelous condition! That thing is two months older than I am, but it sure looks a lot better.
Very nice video, Uncle Doug.
😎 🍻 Stay free, ABL. R 👍
Agreed, Arne. Me too :) Thanks !!
Came out the year of my brithday..
Do you have any white specks ?
Same :D
I could believe a kid named Marty driving a DeLorian dropped that off... Sounds amazing!!
It was in shockingly good condition......no pun intended ;)
I'm not sure we can rule out the involvement of some kind of time machine here... that thing looks amazing
Speaking of Marty and Doc...head over to the O'Reilly Auto Parts web site and search for "121G". You won't be disappointed.
Well said Shawn
That's a beauty. Nice nice job Uncle Doug.😊
Thanks, User :)
Your walkthrough of that circuit made a lot of sense. I'm a "just beginning" hobbyist repair guy, and it sometimes takes me awhile to figure out what is actually happening in a schematic.
I dare say, you're a national treasure.
Thanks so much, GS. Glad the video was helpful.
Wow, Ollie and Jack are really coaxing some SWEET TONES out of that beautiful old Tweedie! 🎸
Thanks, Mike :) I'll tell them.
Dang, that amp looks like it's never seen the light of day!
Agreed, Andy. It's almost scary how "new" it looks.
@@UncleDoug I was wondering in what oxygen free environment it was kept into for all these years... or maybe in some alien stasis chamber in a spaceship somewhere they just love music but... oh well...
Those cats have a better standard of living than I do. Thanks for entertaining and educating me, Doug. I learn so much from you and I appreciate it.
All three were rescued from hell, so I guess they're finally getting a break ;) You're welcome, Ian. That's great to hear.
Got my 'Depends' on as well. I'm and old guy who loves great vintage amps.
Join the club, Larry :)
"Let gravity be your friend" !!! Fantastic ! I wish I had thought of laying the amp down on it's back to remove the chassis, before !!!
Glad you like the suggestion, SH. Best of luck :)
I've always heard that guitars and amps from the late 50s are the bee's knees, but only recently have I been able to experience it. What a clean amp!
It was the Golden Age of amplification, Luke. Agreed.
Good work, Uncle D
Thanks, David.
@@UncleDoug ... copy, brah
I keep waiting for you to be playing and testing an amp and suddenly say "now lets kick on the Fuzz Face and burn!" Thanks for another great vid Uncle Doug!
My burn days are long gone, SK. I'm lucky just to keep from sticking the soldering iron in my eye ;) You're welcome.
Dang, Uncle Doug! That amp is older than I am (just barely) and has aged much better than I have! Thanks, great Sunday morning treat.
Glad you enjoyed it, Ken.
Thank again. MojoTone stand looks pretty cool
It works just a nicely as it looks, Joseph. You're welcome :)
Hello Uncle Doug, Wow, what a survivor, almost like new after 65/6 years. You always do such impeccable work, very meticulous. How fortunate are you to get to work on another early Fender amp with Lily's name on tape, I remember the video with Lupe's name on the chassis. Great tone from the amp, all in part to your knowledge and skills. My last comment on face masks and social distancing wasn't meant for you, however, stay safe, as it was just sad commentary on the state of affairs in our world today. When they say the new normal, that says a lot. Always great to see a new Uncle Doug amp video. Glad your doing well, as am I, staying busy, work, etc.. I have a vintage 1958 Jensen P12Q from a Hammond Organ, in mint condition, for an amp some day. Peace & Happiness from Oregon, Cass.
Thanks so much for all your great comments, Cass. It's always good to hear from you.
hello doug a true gem of an amp ive heard four 50,s fender amps & the tones are all golden reminds me of muddy waters & im amazed at how good fenders 50,s amps were great post doug regards jamie...
Thanks so much, DJ :)
Hello Uncle Doug!!! very helpful videos!!! more power!!!
Thanks, Woody.
Imagine 65 years of smokers and drinkers lurking around that amp... What a lucky beauty. Great video UD! Thank you!
Our pleasure, FW. Glad you enjoyed it.
Uncle Doug making Fender great again.👍
.......one amp at a time :) Thanks, Nigel.
Those Eurotubes Bias Probes look like really handy devices to have, so, I'm going to see if I can order myself a couple of them online soon, since I will be needing them for a diy scratch-build amp project I'm working on.
They are fabulous instruments, Simon. You'll be glad you ordered them :)
Hi Uncle Doug, I noticed one of your engines had a Scintiller magneto. I used to rebuild this in England, we had the agency. Parts came from Taylor Vertex. I still have some of the tools here and a 6 cylinder old magneto in the store. It will be siezed but I could rebuild it. I have documentation and used to have all the stop plates for the different advance curves. I sold the business to Morfeild Operations which was then taken over by Tom Dark engineering and they still do them to this day. I used to rewind the coils and fit new ones when we could get them. I still have the winding machine here in Canada and use it to wind the odd radio coil and speaker field coil. Happy Days.
Thanks for sharing this with us, Allister. Vertex Scintilla magnetos were instrumental in all sorts of drag racing and Bonneville Salt Flats history. It's great to know that repairing them is not a lost art. Our best to you :)
Wow, that's one cool amp Doug...Some serious history there. Love the concealed caps like you did in an earlier video, keeping the amp in it's natural authentic state. Thank you for sharing, and your expert knowledge...My Sunday treat movie...Ed..U.K..😊
Agreed....Thanks. Glad you enjoyed it, Ed.
that light is a explosion proof light housing for a spray booth, thats fantastic
Glad you like it, Russell.
That one is quite a bit nicer than mine. I had a long road back in getting it to look and sound as good as it does now, but it was worth every penny and every minute spent, and now it lives, nearly permanently in my buddy's home studio, and we record it constantly. Most people lose their minds when they hear it.
Yours is from the first production run, beginning in the spring of 1955. It has a smaller cabinet than mine and the speaker is offset to one side. those appear to be the only differences between it and mine, which dates from October 1955, the second run, and also assembled by Lily Jaimez, who was Leo's lead assembly lady. He always showed her the new stuff first, and she taught the test of the crew how to do them. Forrest White covers all of this in his book, "Fender, the Inside Story", but I also had the pleasure of meeting a man and his wife who both worked at Fender from 1957-69, and we had a lengthy conversation about day to day life at the old Fullerton plant.
Lots of cool details and trivia from 2 extremely gracious and fine people! I showed them all my old Fender stuff, and it brought back a lot of great memories for both of them.
Thank you for all your very informative comments, JP, especially Lily's last name. It's great to hear about the history and individuals responsible for our obsession/hobby.
@@UncleDoug If you can get a copy of "Fender, The Inside Story," it's a good read for all Fender nuts, like us. Forrest White was the plant Manager from 1954 till 1966, when he resigned because he would not sign off on the horrible solid state amps designed by the aerospace engineers who were in charge of the new amp designs at that time. Forrest is as a real down to earth guy, and there's lots of fun facts and historical info in his book. I highly recommend it if you can find a copy.
i actually like the whole idea of stuffing old Astron electrolytic caps with modern equivalents, that basically satisfies two things, vintage aesthetics, and modern reliability.
Thanks, Simon. I agree.
Lovely Doug! I worked on a “Lily” 5E3 that looked like it lost a fight with a cat.
Thanks, LV :)
The amp is lovely, the spacship lamp really foated my boat. Best wishes from Derby UK. Comment lubricated by a budget Malbec.
Glad you liked them, Graham :)
55 a very good year!
It definitely was for Fender ;)
@@UncleDoug ...and Chevrolet
Glad to see that people have learned to package their amps and tubes for shipping. Seems they all fear a scolding if they don't.
I must admit that packing quality has certainly improved over the past month or two.
Thank you uncle for another great video. So much to learn and so interesting. Sure a lot agree this is the best tech stuff on youtube
Our pleasure, RJ. Thanks !!!
Lily is a long time tweed assembler for Fender, although I don’t recall ever seeing her last name, unlike Lupe Lopez.
Maybe she was Lupe's sister......a nice combo: "Lupe & Lily Lopez, The Soldering Sisters of SoCal" ;)
@@UncleDoug I had an old Fender amp with Lupe's name on the piece of tape inside. Looked like it had been there a long time. I believe it was a Concert amp, narrow panel, covered in cream "tolex" from the factory. It was a strange amp. I later sold the amp and it then showed up in an issue of Vintage Guitar magazine.
@@UncleDoug I like your naming! Triple "L" !!!
@@Bbendfender I bet you regret that sale...
Another outstanding video chock full of invaluable information! Thank you, Uncle Doug!
You're welcome, Tim.
Lily was with fender for quite a while and is in several nice tweed amps.
Her legacy lives on.........
Great video as always. Finest tweed I've seen. Can't wait to get my amp done. Keep up the fantastic work.
Thanks, Dennis. Good luck with your project.
@@UncleDoug My project is with you. Just waiting my turn.
a month older than me - and in much better shape!
Don't put yourself down, Michael. Your ESR values are still rather low for your age ;)
Great Job Doug
Thank you kindly, Jeremiah.
Just used Mohawk Light Golden Oak Tint Nitro on two necks and very impressed with the color.
Thanks for sharing, Eric.
That rocket lamp base is just like the cutting boards my grandpa made us! Very beautiful.
I agree, Yup. It does look just like a cutting board.
Looking forward to seeing the lamp upgrade...
So am I, Lee. Hopefully, I'll have some free time to make the modification.
This channel is getting to be even more epic than before!
High praise indeed, H. Thanks !!!
Thx uncle doug.... hope your having a great new year so far in these trying times. still no word from the police on anything stolen showing up in pawn shops so far or any other leads .. :(
You're welcome, Ken. We are, surprisingly enough ;) Best of luck recovering your lost gear.
I've been watching you noe since the Fender reverb unit clone you made...(on another network)..You have become famous for you style and expertise Doug. You should be proud.
Thanks so much for your very nice comments, Dom.
That amp is a dream. Amazing condition. I had one in last week that looked like a train wreck, but after the repair, it sounded great. Enjoyed this video as always. :)
Thanks, Frank. Knowing you, I'll bet it did sound great.
Mojotone, you have chosen the right person to evaluate your product. Congrats uncle Doug
Thanks, Alfred. I hope they agree :)
Nice to see it has an owner who cares for their gear
Yes, indeed.
That beautiful old 5E9 Tremolux was born the same year as me ~65 years ago, 1955 also being the year for Rock'n Roll was born. You are forgiven for calling it "vibrolux" a couple times, since the excitement of seeing that sexy amp for the first time was likely responsible? And what a wonderful, exquisitely preserved old beast she is! I once had a 1955 5E1 Champ, but it had a replaced power transformer, which regrettably caused me to trade it at some point (bad decision). Thank you for another excellent educational video Uncle, which even an old, drooling, brain-damaged idiot like me can follow. You are a gentleman and a scholar sir, rare with amp techs in my experience. Cheers!
Thanks so much, David. We enjoyed your comments.
Doug, just want to thank you for the quality content, as usual. And I especially want to thank you for making your channel a refuge from the crazy world that we've been living in. It's nice to come here and be able to "get away" from all the stuff going on. It's so unfortunate that some of the other CZcams content creators who make amp repair videos can't resist the urge to politicize their channel simply because they have a fairly large viewer base. The last thing I want to encounter when I come to watch amp repair videos is somebody ranting about politics. So, thank you so much for keeping your channel focused and providing respite from these crazy times!
Thanks so much for your very thoughtful comments, Jimmy. Like you, I fear and distrust the current political climate, but prefer to focus on the purpose of our channel and the interests of our viewers. There are channels they can watch to hear political opinions.....but when they want to see nice old amps being repaired and tested, we're here for you.
@@UncleDoug Agree 100%!
@@UncleDoug Politics... like science, if deprived of a proper ethic, they simply cannot make anything work right, just lie and decieve.
This is just so Fascinating 🎶👍🎶👍🎶👍
Glad you enjoyed it, Stephen.
It is like watching a History type of channel.
Thanks, F2F. High praise indeed :)
Only with out the ancient aliens.
My wife bought me the Mojotone chassis stand for birthday last year! It is really well made even though you have to modify it in one way or another to make both supports move smoothly.
You're a lucky guy, Tom. My wife got me a pair of slippers.
Your channel brings me so much joy. My dad was an electrical engineer, but didn't really teach me anything. Thank you
I'm rally glad you enjoy our videos, BG.
That Tremolux was in outstanding condition...Wow! The Mojotone stand was sweet (yours considerably less expensive though!)
Thanks, Tim.
What a great way to start the New Year!! Super Fine Tremolux, treats and toys for the cats, preview of guitar stands and a wonderful review of the MOJO TONE chassis holder. Here's to another year of old amps!
Thanks, KM. I hope we can live up to your expectations.
That rocket lamps awesome!
I thought so too, Jon.
You rock kind sir!!! Thank you.
Thank you, Mike :) Glad you enjoyed the video.
1955 was a magic year! The cars - I remember riding in my parents 1995 blue and white Chevy Impala,,,. The electric guitars - Fender, Gibson and Gretsch!!! The Amps - Leo Fender was creating the best guitar amps in 1955! Seeing and hearing this 1955 Tremolux is like going back in a time machine! This was the year that a Rock and Roll song first went to #1 - "Rock Around the Clock" by Bill Haley! Course' I'm biased since I'm 1955 vintage and have been playing guitar for 50 years! Thank you Uncle Doug for all you do.
Thanks so much for your very nice note, John. It's great to hear from you.
Another great video, Doug! Thank you, love to see some tweed!
Thanks, Alex. Glad you enjoyed it.
So this amp is going to appear in the next rock n' roll movie of the 50'!
Yes, indeed......so stay tuned.
I am blown away by the condition of this amp. I wouldn’t be afraid to replace those Astron coupling caps with the red Jupiter caps. They look identical, except for the name of course.
You’re a lucky dog, Uncle Doug!
Thanks, Matt. I really enjoyed working on it.
Doug you really do QUALITY work, I always enjoy watching you restore these old Fenders. Thanks a bunch for sharing your work with the rest of us
You're welcome, EM. It's our pleasure :)
I wish you and your family and the kitties a very good 2021, with good health, peace, happiness and all the joy you can imagine.
Thanks so much, Berre. Likewise to you and yours.
That amp sounds fantastic. The tremolo has got Bo Didley all over it. I am fortunate to have found your video channel. Thanks Uncle Doug!
Welcome aboard, Robert. We hope you continue to enjoy all our videos :)
What a joy to see this Fender Tremolux Amp artifact!! You just never get to see these amps from inside and out...and not having been gone through by heavy handed Gorillas!! So many of these fabulous tweed covered gems were painted black or had the tweed torn off when the Black Face era arrived... thanks for the video Doug, and it’s always a pure pleasure to watch you bring all these treasures back to a sound life!! Semper Fi
Thanks so much for all the great comments, Luth. It was our pleasure :)
Wow! What an amazing amp! I would sent it to you as he did, Uncle Doug. You do everything with care and respect for the item.
Thanks so much, ST. We do our best.
Dear sir .. you are king of amplifier repairs on youtube. each and every one of your videos has something to offer the aspiring tech or the advanced .. ive watched you for a long time and refer to your videos when im stuck .. if you werent already a teacher in your earlier life you should have been .. thanks for your efforts .. here in canada in my home your the one and only for this stuff Randy
Wow....thanks so much for all the very nice comments, F9. I'm really glad the videos have been helpful.
Impressive. How you hold all that knowledge in your brain is beyond me.
The Mojo Tone chassis stand looks to be a winner.
Another great video Uncle Doug!
Thanks so much, Mike.
Box surgery... sweet!
And the prize... ! By God's sweet riffs!
You, sir, are a monk of the Order of the Holy Amp of Old. I relished every second of this encyclopedic video. This channel of yours is a living museum with dimensions of infinite furthersomeness.
You are too kind, PMD, but we graciously accept your generous praise.......like ravenous jackals accept sirloin steak.
Say Uncle Doug.....you sure that thing didn't come from a museum ? Never seen one from anywhere in that gud a shape. Very nice work. Hope the owner puts it back in the air tight glass case.....
It had some use.....but it also had some exceptional care, and a nice cover :)
That rocket is awesome! I always light up myself when I see a new Uncle Doug video's been published. Thanks for all the great amp exposes!
You're quite welcome, Tim. Glad you enjoyed them.
As usual Doug, you have explained the inner workings of the amplifier, and the tremolo circuit. Thank you.😀
Our pleasure, Ken.
The colour-coding on that new power lead is not just the European colour-coding, it's also the same colour-coding we use over here in Australia, the yellow/green wire is the earth wire, brown is the active wire, and blue is the neutral wire if I remember correctly, our mains supply is 240V AC/50Hz.
Thanks for the helpful input, Simon :)
Brilliant video. I love the capacitor rebuild inside the old shells. This really is a museum piece and I love the respect you show it. I've been watching you for three years now and I'm proud to say I've learned enough from you and studying independently that I've set up my own amp repair and servicing and building business. Thanks for the ongoing inspiration Doug. I'm forever in your debt.
Wow....I'm really glad to hear that you've put the video knowledge to good, practical use, Simon. Best of luck with your new business.
Incredible feature UD! This is no question a museum piece. Not even Capitol Records studios have a tweed amp this mint. Really amazing
Thanks so much, K.
Great video
Glad you enjoyed it, Ron.
Whomever sent this to you has proven to me, at least, a former skeptic, that at least one time machine (aside from the one allegedly in the Vatican) actually exists on this planet. This is a true gem, and well worthy of the royal treatment provided it, by the very best.
I've Been near that road, once,,,
Twelve years ago, a gent from Indiana tracked my Motorola Dealership down, in search of a NOS modulation-stage transformer, for a very peculiar, first generation Motrac UHF Transceiver, which was part of a system tested for Motorola, by one of the departments within the LAPD. He wound up visiting my shop to pick it up, and I installed it - just to have the honor to work on something prototyped by Motorola in their heyday, the 1960's. While I'm at no where near your skill level with regards to amps, and tube-moderated devices, in-general, I felt honored to have been allowed to "take METCAL soldering iron to PlaCir", and carefully change-out that open transformer. Kind of a 'warm and fuzzy' feeling that day; I think that I know how you felt!
I do indeed, AMS. Thanks so much for the nice comments.
Thank you for the video. I really enjoy them especially the commentary on the asbestos scratch and sniff!
You're welcome, Tom. The EPA also expressed appreciation for the remark.