Thank you for this video my Dad and I were able to get the job done in 20 minutes. The hardest part was getting the console taken apart and put back together.
This is a belated response but for anyone googling this...The fix was even easier for my 2012 Hyundai Santa Fe. The shifter looked like it was in "Park" but it wasn't exactly sitting right I guess. Once I started up the car again, shifted in and out of drive and jiggled the knob around a bit, then back into Park, I was able to turn the ignition all the way off and the key popped right out as normal. So try that first before pulling fuses or tearing open your dash!
In my case, the plastic cover on the top of the shift knob had broken and some small plastic pieces had fallen into the shift knob button mechanism. I just had to pull off the shift knob and shake it upside down to clear the broken bits.
Thanks for posting this Video of "Key Stuck in Ignition." This happen to me at night, and I didn't have time/light to take apart the console, but the quick fix, of taking the fuse out was big help, gave me a sense of relief not having a unlocked car /w a key inside. I will take part the console today, hopefully clean out / bend micro switch. Thank You Again Long :)
Gracias a este video pude resolver el como arreglar lo de la llave atascada pero muchas veces no es el switch qué esta en la palanca de cambios si no que simplemente la palanca está muy abajo solo hay que levantarla un poco para que libere el clutch de la palanca y puéda salir la llave
Thank you! This did the trick, saved me a few hundred. Garage said they would have to take center console and steering column apart to troubleshoot and fix it. They also told me to disconnect the battery to get key out. I found your video and this did the trick to get the key out in a pinch with the fuse and to fix the problem. $0 spent and now it's working.
85% of this type of problem is because of (shift knob) , It happened with me 2011 sonata and went to Hyundai dealer and got the knob and it took them 10 minutes to replace and the problem solved !
I have sonata 2011, my ignition key is ok and shifter is ok, but there is a continuous click sound coming from inside the ignition cylinder, do you think its the micro switch issue as well? Thanks
For those of you in a quick bind that don't want to pull your fuse or want to always pull fuse to park and don't want to get into the guts of your gear shift, go here czcams.com/video/A4t6yDZKb5g/video.html for the quick fix.
If you want to bypass the switch you don’t have to take it out just cut the wire and connected together to bypass the microswitch It’s can save u time in trouble
361lt thanks, I ended up being able to pull out the opposite end. It was a pain in the ass pulling the connectors out of white part of the switch but with a fine pick I was able to pull them out and not have to cut anything
Thank you for this video my Dad and I were able to get the job done in 20 minutes. The hardest part was getting the console taken apart and put back together.
This is a belated response but for anyone googling this...The fix was even easier for my 2012 Hyundai Santa Fe. The shifter looked like it was in "Park" but it wasn't exactly sitting right I guess. Once I started up the car again, shifted in and out of drive and jiggled the knob around a bit, then back into Park, I was able to turn the ignition all the way off and the key popped right out as normal. So try that first before pulling fuses or tearing open your dash!
Bruh thank you for this comment
It only works for so long.
Just unbelievable, these kinds of videos never turn out right for me. This was dead on accurate and relatively easy just like he shows. Thank you!!!
he never said if he cleaned it or replaced it
This was even easier than it appeared in the video, THANK YOU for posting, especially the quick fix!!
You got same image as me lol
Just fixed mine with the help this video. Thank you! Bend the micro switch blade out a little bit, reinstall. Works fine.
where did you buy the mirco switch?
@@visualsbyandre8235 I used the existing switch. Just bent the blade out some before reinstalling.
I am having the exact issue and I just found this video on the way over to the dealership, headed back home to try now
In my case, the plastic cover on the top of the shift knob had broken and some small plastic pieces had fallen into the shift knob button mechanism. I just had to pull off the shift knob and shake it upside down to clear the broken bits.
Thanks for posting this Video of "Key Stuck in Ignition." This happen to me at night, and I didn't have time/light to take apart the console, but the quick fix, of taking the fuse out was big help, gave me a sense of relief not having a unlocked car /w a key inside. I will take part the console today, hopefully clean out / bend micro switch. Thank You Again Long :)
Which fuse did you take out? Having this same problem now and need a bandaid fix until I can get it into the shop! TIA
Gracias a este video pude resolver el como arreglar lo de la llave atascada pero muchas veces no es el switch qué esta en la palanca de cambios si no que simplemente la palanca está muy abajo solo hay que levantarla un poco para que libere el clutch de la palanca y puéda salir la llave
Great fix!!! It took me all of 15 minutes.. thank you!
Thank you! This did the trick, saved me a few hundred. Garage said they would have to take center console and steering column apart to troubleshoot and fix it. They also told me to disconnect the battery to get key out. I found your video and this did the trick to get the key out in a pinch with the fuse and to fix the problem. $0 spent and now it's working.
Thank you for posting !! Hardest thing is getting the part from the dealership
What part was it?
Thank you! This just happened to me. It was a quick fix for now.
Thank you good job my key stuck in my car the other day and I do the same thing and it worked thank you
85% of this type of problem is because of
(shift knob) , It happened with me 2011 sonata and went to Hyundai dealer and got the knob and it took them 10 minutes to replace and the problem solved !
I pulled the yellow thing out and it came out but there’s this little yellow explanation point flashing when I turn the car on
This video truly saved me. Thank you so much for sharing this!
Thank you so much!! Worked like a charm!!!
Thank you soooooo much for sharing. Worked like a charm
Saved me so much time thanks so much !!
Does anyone have the part number for the micro switch?
I was wondering the same thing
Same, I haven't been able to find out what part this is.
Has anyone found the part number or part name
Omg!!.. thanku sooooo much for this amazing vidoe!!.. it worked like a charm!!.. yay🎉❤😊
u saved me allot of money man thank you!!!!!!!!!
You're a lifesaver man 🤙🤙🤙
Thanks, I am in need of the part number of the part and the name
THIS HELPED ME SO MUCH THANK YOU!!
I just did it and it worked 💯👌🏾
you saved$ me at least $ 100.00 dollars. thank you!
Thank u for this!!!
This helped a ton 👍🏾
Where are y’all finding the part because I called Hyundai and they acting like they never heard of it
Thank you so much!! I did what you did and it worked
thank you
Thank you so much
I have sonata 2011, my ignition key is ok and shifter is ok, but there is a continuous click sound coming from inside the ignition cylinder, do you think its the micro switch issue as well?
Thanks
I have to do this to my hyndai sonata. Because my mechanic didn't want to do his job. I don't want to keep doing so and end up blowing a fuse.
Watched a vid on how to fix. Looks simple to fix
Thank you so much!!!
Thank you do same but is my key in stuck and same problem is be my ignattion be bad
Just turn your steering further and start the ignition…
What’s the part number??
What is the exact name for this part? I need mine fixed
Ely Vasquez Microswitch u could also can Bypass the switch by connected to hard together no more problem
Ely Vasquez call microswitch But you can also buy pass it by connecting two wire together and no problems
@@longtruong3135 did this bypass myself an can verify it works. Thanks Long truing.
What’s the name of the part? Where should I order? Too many micro switch on google😁
But what im trying yo figure out is the ignition switch is sold to replace the key n the part u turn what do this have to do with that or is im lost
Thank you fuckin god
Has anyone figure out the part number or the name of the part
It a micro switch for safety shifts lock but u can by pass it by connecting both wire together or jump together behind the switch
For those of you in a quick bind that don't want to pull your fuse or want to always pull fuse to park and don't want to get into the guts of your gear shift, go here czcams.com/video/A4t6yDZKb5g/video.html for the quick fix.
How tf do you unplug the other end from the switch that’s way the hell up in the center console though?? That’s the hardest part of this
This is not as easy as it looks. Please explain how the other end of the micro switch comes out....the end with the blue and brown wires
If you want to bypass the switch you don’t have to take it out just cut the wire and connected together to bypass the microswitch It’s can save u time in trouble
361lt thanks, I ended up being able to pull out the opposite end. It was a pain in the ass pulling the connectors out of white part of the switch but with a fine pick I was able to pull them out and not have to cut anything
alguien que me explique en español algo resumido del video
Txxx bra
If this takes longer than 10 seconds to do then your doing something wrong
🎉🎉🎉🎉
Cocain finger nail
You should trim your nails lmao
Bro trim those fingernails lol
Typically folks who have long nails like that are for one or two reasons, but I’m guessing he plays guitar and doesn’t like using a pick.
Bad video!
Thank you