Best Star (Torx) Bit Brand? Milwaukee, DeWalt, Makita, Ryobi, Wera, Wiha, Irwin, Bosch, Bauer
Vložit
- čas přidán 10. 06. 2024
- Which star (torx) bit brand is best? Let’s find out! Milwaukee, Dewalt, Makita, Wera, Wiha, Irwin, Bosch, MasterForce, Bauer, Hercules, and Ryobi. Each star bit drives in and then remove s100 screws into pressure treated 4x4s. New and used torx bits tested for failure load torque as well as wear resistance. I've never accepted a sponsorship or even a promotional item from manufacturers in order to provide the most unbiased test reviews possible. I buy all of the products and test supplies with the help of Patreon support. Hope you enjoy the video!
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
Wera: amzn.to/3c6q9s0
Irwin: amzn.to/3kSESLl
Bosch: amzn.to/3ehPySq
Makita: amzn.to/3blgD51
Wiha: amzn.to/3sTAj64
DeWalt: amzn.to/2Oa64cf
Ryobi: amzn.to/38hBzYM
Torque Adapter Used in Testing: amzn.to/3kPrg3m
DeWalt Bit Holder: amzn.to/3qpaZTX
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/2SvwQdS
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC - Jak na to + styl
Can we all just take a minute to appreciate the time, effort, trouble and professionalism this man invests in his videos every single week?
I take around 15 minutes... every Sunday. ;-)
David and grovermatic, thank you both very much! It means a lot to me!!
@UCslDNXIRrRQe4_tCNqkOuXw Some of us can't financially support him, but if you can and it makes you feel better to flex that way, great.
I was thinking the same thing. This had to be a really boring day or so. I really appreciate what he does so I don't have to.
This man is the saviour
This man goes to the most extraordinary lengths to give us a fighting chance in the world,he deserves a medal plus he replies to all texts.
Thanks for the nice comment!
Yay, Project Farm Guy for President
@@ProjectFarm I bought an electric chainsaw based on your reviews. I cant get enough lol you make me spend money, but on quality of course lol
Seriously
Agreed. He’s helped me make solid choices on products. 👍🏻
The best parts of these videos is when you list off a tremendous amount of work and effort nonchalantly as if it's just a simple step when making a cake. Then you quickly move on to the next hard thing you had to do in order to keep me entertained as I just sit here. I'd stand up and applaud you if I wasn't so lazy.
Wow, thank you!
weren't*
;P
I have many tire gauges and they all seem to read differently. A test on cheap vs expensive and ones that go to very low pressures would be awesome. Thanks for all your hard work to guide us in making good buying decisions
You are welcome! Thanks for the video idea.
I second this! Love and thank you for all you do!
Keep it up, who else here doesn't buy anything until they check to see if Project Farm has tested it?
Thank you very much!
@@ProjectFarm on the cryo freezer you use occasionally, do you have the alarm battery disconnected? Also the warm alarm setting can be adjusted when the key is in the middle position, then press alarm reset button when the display probe is at/ below the HA setting. You won't have all the flashing lights when you video the display!
God Bless.
I definitely use PF (and other channels) as a guide if I'm interested in something to purchase and tests have been conducted on it. Even then, sometimes its not necessarily about getting the best of the best of side item but how you invest your money for said item. There has been times I've bought last place items due to the one time factor of use. Other times, it has been the overall winner cause I need the longevity of the item to last. So it doesn't matter if its the first or worst placed item. In the end, this man (and others) have put in the time and effort for us to use their tests as guidance, and that is something I am grateful for.
Thanks PF for all that you do.
👏👏👏👏👏👏👏👏👏👏👏👏👏👏
I check Project Farm for input ALOT! I don't know of a better "way" to get honest real world testing and application information than here.
Yep. Diablo sawzall blades, Makita angle grinder blades, engine restore to name just a few recent purchases.
I want to go to Home Depot and look for products stating Project Farm approved. Can’t wait for that day. This guy deserves it. Thanks for all the hard work you put in all of your videos. 🙏🙏🙏
Wow, thank you!
@@ProjectFarm he's right you know. You do deserve that
Every trip to the hardware store, I'm pulling up PF and fast forwarding to the ends of the videos. :-D
The best stuff isn’t at Home Depot
I would buy anything labelled "PF approved". Although it is always sound to get reviews and tests from different sources!
Job interviewer: What do you do for a living?
Project farm: I do a lot of screwing
lol
thing is, aint wrong XD
Wilt Chamberlain - "Damn , son!"
Sometimes I do nut jobs.
He makes quite the impact.
I don’t understand all these thumbs down?? Are they all the manufacturers of tools who are pissed at him? This guy deserves an excellence award. It is incredible the level of testing he does, he is the BEST in CZcams.
bots
"As seen on Project Farm" will be the new thing items are advertised with.
👍🏼 Would be good, as long as it doesn't detract from the good thing we've got going now!
Thank you!
I commented twice today in my Facebook motorcycle group about how Project Farm warned me about... One was about expanding foam in a motorcycle tire...
Or “Project Farm tested and approved”
Approved for use in small gas engines, or the Farmabago!
I caught myself reading a packaging claim today and saying to my dog "we're gunna test that" and I swear she rolled her eyes
lol lol lol
As someone who's profession is in quality control... you do the work of an entire team. Very well done, I also feel much better about having so many DeWalt bits hehe :D
All of your videos are great, but this one made my arm hurt just WATCHING you drive so many screws. You put a huge amount of work into these. Smart + good planning + lots of hard work = great result. Thank you!
You are welcome!
Can we all just take a moment to appreciate how much work was done here?
Thank you very much!
“We’re gonna test that....”
Music to my ears....
Thanks for watching!
"Were gonna test that" and "i make a new one" (my mechanics), are the two things you wanna hear on youtube
Man for the INSANE amount of work and thought you put in your videos you definitely deserve more subs👍
I have watched a LOT of review videos. This would be close to the best I've ever seen for thoroughness, communication and overall presentation. You sir are fantastic at what you do and I appreciate this video a lot.
Thanks and you are welcome!
I love that you are testing consumables. This is the part of our lives where a lot of money can be wasted.
Thanks!
True, but in my experience, the time wasted is worse than the money spent on the bits. I would gladly pay a premium for a bit that gave me a reasonable and reliable life-span, especially with "impact" bits.
@@MrNside PB Swiss bits
I very seldom comment on videos, but you are legitimately the CZcams who's videos i look forward to more than any. The information you provide is invaluable and I appreciate it so much.
Wow, thank you!
Same bro!
I don't buy any of the products he shows in his videos, but I still watch every one them just to appreciate the time and efforts he puts into the videos, this is what content creation means, and not some 10 second tik tok
Thanks!
I thoroughly enjoy every single one of your videos. Your techniques for testing are so clear. Thank you! 🙏 I’m completely addicted to your channel. I never make a purchase without checking here first.
You are so welcome!
Project farm: Files taxes.
The IRS: You spent how much on tools?!
Project farm: Yes.
lol. My wife and the IRS both!!
@@AbriOG 1200 isnt a big deal, the lumber was like much more expensive
@@bradhaines3142 Especially nowadays!!!
Hahaha this is so accurate. He has the same tool and supply bill as an independent contractor!
I imagine he's on some kind of money laundering watch list with the IRS..
Edited I mistakenly put IRA instead of IRS.
One is a terrorist organization the other fights for Irish independence.
Is my wife going to get mad at me for watching another Project Farm video instead of washing the dishes? "We're going to test that"
Lets find out !
Hahaha
LOL!!!
lol. NICE!!
Is the couch comfortable to sleep on? We're going to test that!
This channel is amazing! Thank you! One of the good things about social media is it makes this sort of thing possible. The quality of these reviews is awesome.
Thanks!
The effort you put into these videos is admirable. Scientific, empirical approach to testing methods and consistent results. Very good information. The only thing I was missing were the metric conversions for inch pounds, but even without those the difference is durability becomes abundantly clear.
Thanks! Thanks for the constructive feedback.
Indeed - I am a professor of Mechanical Engineering and I can tell you that the ideas for tests and rigorous conduct of them means that virtually any of the Project Farm videos could be written up and receive a Masters degree. Well done sir!
Thank you so much!
There’s a compliment for you wow. Enjoyed your video.
These videos are great and very thorough for product reviews, but if that kind of stuff could earn an MSc (!) at your uni, I'd steer well clear ...
I agree that these videos are very well made and the test methods are well thought through.
However, I really hope that there's a lot more required to get a Masters degree than this.
thankse for youre words biker max. i am not projct farm but i am geniuly happy from it. sirlord
Still one of the best, yet underrated channels on CZcams. This dude rocks!
Thanks!
You probably comment underrated alot, don't you?
I love watching your approach to testing! I’m a mechanical engineering student and I find these tests fascinating to watch.
Great to hear!
Project farm is love, project farm is life
Just finished the Joe Simpson show. The long ones are great while driving at work. #Rambletron
Thanks for the nice comment!
lol
Don't forget what thats from XD
r/woosh
Not all heroes wear capes. This one wear glasses and t-shirts.
Thanks!
You forgot the actually useful Toolbelt
Amazing work and detail to every video you make! All videos you make are constantly helpful for my line of work
Thanks! Great to hear!
Its insane how much time, precision and effort you lay in your videos! Thanks for all mate :D
You are welcome!
We appreciate all your HARD work making our choices better! Thank you!
Thank you very much!
this is super helpful, thanks!
You are welcome! Glad to hear!
I finally see another CZcamsr reply or comment to another CZcamsr
This channel is by far the most valuable on CZcams! Please keep it up!
Thanks, will do!
You’re videos are awesome man I can watch them for hours thank you for all your hard work
You are welcome!
The amount of time and effort this man puts into his videos, not to mention the transparency and no-bs quality content...holy moly.... give this man your upvote and sub!
Thanks for the nice comment!
@derp derpin pretty sure it's the same with most things especially politics
Easily the hardest working reviewer on CZcams - the lengths you go to test stuff is mind blowing! Honest, fair and absolutely comprehensive. You're an inspiration. You inspired me for my own channel. Respect to you, Sir!
so true
yess
Thanks! 👍
And WOW! So fast at installing screws!
This is exactly what I need. We've been wanting to test some random sets for work...but you already did it. Thanks!
You are welcome!
Thank you for the amazing effort you put into each video. Have you ever done anything on bandsaws?
This man is a national treasure. The amount of work you he puts in is just amazing. Love form Australia
Thanks so much!
And ditto from this Australian
There's literally no limit to the lengths you'll go or the screws you'll sink to provide quality content. Pure class! 🙋huge salute to you sir
Thanks!
I love that you take this as an actual job. You don't seem to take short cuts, and always try to give the best.
Thanks!
Never found anywhere online with better testing and information than here. Thank you.
Thanks for much!
I appreciate how thorough and fair he is to each product.
UL should pay this guy.
Thanks!
Fantastic testing as always! I was amazed by how much torque those bits were able to tolerate before snapping. You must've been exhausted after all that screwing! LOL A++
Great point on the strength of the bits. Much improved over the ones I've used years ago. Thanks again!
@@ProjectFarm BTW DeWalt also sells some other ones for a little more money that specify that they are impact rated. They come in a black case that otherwise looks the same as the yellow ones. I've never actually tried them because the regular cheap ones always hold up well for me and I use them hard on a daily basis.
I'm actually amazed that 1) The DeWalt bits were so inexpensive, and 2) All the bits were such relatively high quality. There didn't seem to be very big gaps between the best and worst in each category.
Thanks for the feedback.
Your videos are great! Thank you for taking the time to get the materials, film, Edit and upload your content. It's interesting, informational and perfect for winding down in the evening. Thanks again, keep up the great work!!
Thanks, will do!
Love those XPS bits by Makita, glad they got the Project Farm approval stamp
Thank you very much! I'm impressed with them!
The coating on them also help with rust prevention.
As a person who works in the trade industry, this man alone really helps me decide on which new items to buy! Such good quality content, and non bias reviews, keep up the great work!
Thanks, will do!
I have made around 6 decisions based on his vids one being my boots lol ...
Thank you very much for taking the time to drive and remove all of those screws!
You are welcome!
dude you are crazy.. the detail and thought you put in to these videos is amazing. I can't stop watching. thank you for your work
You are welcome! Glad you enjoy!
The CZcams algorithm is sometimes a blessing, I found your channel last year and I've been entertained ever since
Wow, thank you!
I searched for "knife sharpening" or something, and it was one of the best searches ever.
You don't get detail like this hardly anywhere else. Love it lol
Thanks so much!
Great video , explanation , test and review. Just earned yourself a new subscriber
Thanks for watching and subscribing!
Also, appreciate how much effort you do with all your testing of products..well done!
Thanks and you are welcome!
Thanks for all your work. I’m watching you from France. I found your channel a short time ago and you’re now a reference for me to choose the best quality and long-lasting products😁
You are welcome! Awesome, glad I can help!
Greetings from the Czech republic. Nice to see something made in my country in your test. Even better that it works well.
Thank you very much!
Your testing of all of these products has made me so much more confident in my purchases. Thanks for your time and attention to detail.
You are so welcome!
Love the time and effort you put in these vids.
Thanks so much!
Man, your patience and dedication is out of this world. Excellent content. Thank you.
You are welcome!
Even though, I rarely need any of these what this channel reviews, I must say: These reviews are bonkers. The quality is so high, and how much is tested, how much prepping is done prior testing. Hatsoff! Pleasure just to watch these :)
Thanks so much!
I dont even own any form of tools, but i need to see the tests of these 🤣
You sir never cease to amaze me. The time, effort, and quality you put into your videos are incredible. You are a priority on my watch list!
Thank you!
Thanks for all you do. Your videos are great and well thought out. Please keep they going,
Thanks, will do!
I love the way you just get to it without a bunch of fluff. You rock dude!
Thanks!
I've been with you since 22k subs. You've come a long way in editing, but you haven't lost touch with your subscribers (and that really shows with how many subscribers you've grown in just a few years). The fact that you still like and reply to as many comments as possible really shows your personality
Thanks for the nice comment!
I've only been watching your videos for a couple years and compared to everyone else on CZcams you are by far the best
Thanks!
There's only around three CZcamsrs i trust with product reviews... You're one of them.
Thanks!
As always, thanks for the detailed comparison of these tools!
You are welcome!
Legend has it that Project Farm laughs at “legendary performance”
lol. You are right!
What about "Exceptional Performance!" ? :D
PF says, "Well, we'll see about that!"
Gotta remember, legendary although generally used to describe positive attributes, doesn’t necessarily mean good, you can also be legendary and terrible.
I love your tests. They're so accurate.
Thank you very much!
I came here to say just this.
Outstanding! You are literally the only tuber that I have notifications set on for. Just getting to this one. I am about to install a new deck/staircase, so this was great. Dewalt and Makita are the ones I usually lean towards.
Thanks!
You put a lot of time and effort into this, great job and informative, luv and respect ✊ from uk 🇬🇧 😊
Thank you so much 😀
Not sure if you've included Wera in any of your previous tests but I'm super glad ya did here!!
Thanks!
@@ProjectFarm Could you do hex bits please and include two european brands like Wera, "Swiss Tools" and a chinese one "Broppe"?
Ordered some Wera myself. Looks skookum.
I like to branch out and find tools not readily if ever seen in US stores.
I myself love to go into a hardware store when visiting another country and check out their tools. I have a drawer of European tools that are my momentos.
I got a Wera ph2 gold impact bit. I'm been trying it out.
i've never heard "inch pounds" so many times in my life but i love it
Thanks for watching!
It's a little more relatable than "furlong stones"
@@BrBill - How about "cubit libra" (Roman) or maybe "she mana" (Babylonian.)
@@ProjectFarm Heard of Newtonmeter?
@@thfmadmax He has used nm and other SI units in other videos. I'm not quite sure why he chooses SI in some places but not others. For example usually he measures weight in grammes.
As a European I'd far prefer he always used metric but I can understand how big his NA audience must be and that he himself has greater familiarity with imperial.
Another very useful video for hobbyists and professionals! Thank You Todd.
It would be very interesting too see a test comparing socket wrenches, including also some of the European manufacturers, such as: Gedore, Unior, Irimo, Bahco, Rothewald, Wera , Craft-Meyer etc.
You are welcome! Thanks for the suggestion.
The more I watch this channel, the more I love it.
Previously I knew what penetrating oil to use when I removed some rusty bolts and nuts, when I worked on drum brakes I knew what safety glasses to use, and when I removed some scratches from the clear coat on my dad's car, I knew what polish to use.
Yesterday I was going to work with another project, but I didn't had any torx bits, so I said "hmm, probably Project Farm has a video about it", and surprise surprise, it's just been uploaded!!
I just wanted to say how much I appreciate your channel, it's been very helpful, and I think it deserves more subs, because this kind of content is invaluable
From Mexico, all I can say is thank you, greetings!
Thank so much! Glad the channel has been helpful!
Please keep making these videos and don't change the format - everything about the way you do them is just right!
Thanks, will do!
his dedication is immesurable
Thanks!
I dunno, I reckon Project Farm could measure it, then apply it to a scale as a benchmark, pick a random selection from the population, measure them, then give us some pretty solid data. 😂
I measured it for you...
It's bucket loads 👌
We're gona test that!
Great job. You do lots of things and spend many hours for this helpful videos.
I really appreciate it.
Thanks!
Thank you for sharing this info. You did alot of work!!! I appreciate your valuable time . Enjoyed this video very much 👍👍
You are so welcome!
I remember when this channel started up never disappoints Todd keep up the great work love your videos
Thanks, will do!
Loved how you were 'skating' across the floor with the sped up screw montage. Too funny. Great video.
Thanks!
Yeah I noticed that on his Phillips test video lol nyooom
Your reviews are unmatched, Keep up the good work!
Thanks!
You're dedication to testing is outstanding! Fair play chap, you're bit of a legend!!
Thank you!
Who dares to dislike this?! Give this man some respect! He deserves it.
There are some hidden gems of a quality manufacturing in Czechia.
Wera is a superb German tool manufacturer.
Thanks for watching
Are the Wera bits really that expensive in the USA? In Germany they're around the same price as the other big brands, in packs they're around 0,50-1,00 € each for regular and like below 2€ for the Impaktor bits.
they dont sell a lot because the stores dont stock them, chinese crap pushed out quality tools, which drives up the price of quality even more
@@tedundercarriage8183 I think too, and this coming from a former marketing professional, that we Americans tend to automatically associate Made in Japan or Made In Germany with high quality. Thus we generally don't think twice about paying a premium for tools or other goods made in said countries.
Another great analysis and good video to show the results. Thank you.
You are welcome!
Awesome video! Great job of providing decision making data!
Thanks and you are welcome!
Thank you for all of the meticulous time and effort you put into your testing and analysis of tools. I can only imagine how many hours it takes to make a single video. Not many creators do what you do nowadays. Keep up the great work!
Thank you very much!
I really appreciate your attention to detail and scientific method in testing tools etc. I really enjoy your research. When I'm looking for something I usually see if you've tested it before i buy. Thank you, sir.
Thank you very much!
Excellent video project farm as usual, you are the best, thank you, great job!!!!
Thanks and you are welcome!
I come back to this video at least twice a year. Like all of the others, thank you for your work!
Wow, thank you!
The used bits had a higher sheer strength thats likely due to being work hardened.
Great point!
i was thinking the exact same thing!
There more likely to slip a bit before breaking due to being semi rounded thus allowing a bit more pressure to build o think
yea
That's possible - could also be that "ringing" the metal of the bit during the thousands of impacts allows the stresses in the bit to settle out. Like Shot-peening connecting rods for high horsepower applications.
That would be a fun test - put a bit in a drill with a slip clutch, and let it rattle on a strength that's high enough to sink the screw/bolt into the wood, but not go crazy and cam out the bit...let various bits rattle/ring for different amount of times and see if you can see a noticeable difference in end strength.
I admire your hard work, patience and resilience in making these long and at time tedious tests.
Thank you very much!
That's dedication thanks for doing these test so I don't have to wonder if I have the right tools for the job
You are welcome!
I have so many tools purchased based on your recommendation alone ! Awesome job!
Thanks!
Right on time, Todd!
I'm was heading to Home Depot in a few minutes.
I'll go after I watch this video 😄
Thank you very much!
This channels content is so professional and fun to watch! Been watching since 2017
Thanks so much!
I sincerely appreciate the time, effort, and money you out into your videos! I’ve been a fan for years!! A video recommendation I have is maybe comparing stop leak brands such as ATP AT-205 and Lucas Stop leak. I would assume there would be a way to do this without having to use actual engines? Just an idea! Thanks again! Much love from Utah!
Great suggestion! Thankyou.
Amazed by your thorough, objective videos!
Thanks!