INSTI HIV Self Test is a simple to use home test for the detection of HIV-1 and HIV-2 antibodies. It provides instant results in the comfort of your own home.
Thanks for your message and patience in a response. The Control dot or point can vary in its intensity, a light dot does mean the test is performed correctly. If you see the “C” dot but do not have a “T” dot, the test is negative. Please reach out if you have any other questions, we are always happy to help. Have a good week and stay safe.
hi, accidentally my finger touched the tip of the bottle with the solution while blood letting. is there any chance ill get infected of the antigens which is in the solution liquid?
I tested and saw the C dot looks very weak but it was negative for 20 min, after 20 min i pressed with my finger in the membrane then another dot appeared, what does that mean?
Hello. It is ok if the C dot appears lighter than the instructions or training video. As long as the membrane shows the C dot, it means the test was performed correctly. Regarding the second dot that appeared once you pushed the membrane with your finger. The INSTI flow-through (immunofiltration) platform is designed to provide immediate reactions without the need for physical pressure or longer reaction times. In some situations where the procedure may have a user fault condition, such as applying physical pressure to the membrane or going past the reaction time (over 1 hour), non-specific binding can occur, and a second dot can occur. Basically, results after physically touching the membrane (and past the one-hour mark) should not be considered, but as this happened after the test that was valid (control dot), the result would be interpreted as non-reactive.
@@gohaniv8134 Thanks for your question. After exposure to HIV, it can take the average person anywhere from 3 to 12 weeks (21-84 days) to develop enough antibodies for a screening test to detect them. This is called the serological window period. Some individuals may produce antibodies 21-22 days (approximately 3 weeks) after infection and thus may test positive (if infected) with an antibody test, but this is dependent on the person and can take up to 3 months to produce sufficient antibodies (IgG or IgM) to generate a positive result. About 97% of people will develop detectable antibodies during this window period. It is recommended to wait at least 21 days (or 3 weeks) to test for the first time. We also recommend testing again at the 90 day mark as different individuals can develop antibodies in different timeframes.
Hello, thanks for reaching out to us. The dot you see may not appear as dark as in the picture. But as long as you see a dot, even if it is faint - this means the test was conducted properly.
Hello I did the test came back negative, when I was doing the one drop blood I accidentely touched the bottle, I just pitted the plaster after. Is there any chance of getting hiv from this test ? Thank you
Hello Nr Bhr. Thanks for messaging us. There is no risk of being infected with HIV from the INSTI Test. There is no HIV present in the product (solution bottles, membrane unit, or test components). The INSTI HIV-1/2 Antibody Test does not detect HIV itself but rather the antibodies produced in response to the virus. The INSTI® test uses the gp41 and gp36 antigens. Antigens are only small bits/parts of the virus and are not infectious. HIV would need to be completely intact for it to be infectious. Hope that helps explain for you! Have a good day and stay safe!
@@nrbhr9100 Hello. The g41 and gp36 are the antigens (recombinant proteins) that are blotted onto the membrane and attach to the antibody in the blood sample. So they are not in the bottles but are blotted onto the membrane (where you drop the solutions into). Hope that helps. Stay safe and have a good week.
Hi there I have tested myself after more than 90 days after my last suspected exposure and been tested negative, now should i go see a clinic to re-confirm for another test or Is this device’s result is legit??
That’s a great question. With INSTI, our recommendation is that if a negative result is observed, the individual should test again at 3 months from the date of exposure. Most people who become infected with HIV will develop detectable antibodies within this timeframe. There is no requirement to re-confirm a negative result with INSTI after 3 months, however, if you are unsure about the result or participate in higher risk activity then it’s a good idea to test yourself regularly (every 3 months) or follow up with a doctor or clinic. Take Care and Stay Safe!
Hello. Thanks for reaching out. To help you understand how HIV testing works and when tests can detect an infection, here is some information on the testing window. After exposure to HIV, it can take the average person anywhere from 3 to 12 weeks (21-84 days) to develop enough antibodies for a screening test to detect them. This is called the serological window period. Some individuals may produce antibodies 21-22 days (approximately 3 weeks) after infection and thus may test positive (if infected) with an antibody test, but this is dependent on the person and can take up to 3 months to produce sufficient antibodies (IgG or IgM) to generate a positive result. About 97% of people will develop detectable antibodies during this window period. As you tested more than 21 days after exposure, it is possible that you are within the timeframe to test. However, as it is under 90 days (3 months), we do recommend to take another test at three months to confirm as some people do take longer to develop antibodies.
Hello. If I understand you correctly, you are asking if you can take an HIV test after being possibly exposed 40 days before. To help answer, it is useful to understand the testing window. After exposure to HIV, it can take the average person anywhere from 3 to 12 weeks (21-84 days) to develop enough antibodies for a screening test to detect them. This is called the serological window period. Some individuals may produce antibodies 21-22 days (approximately 3 weeks) after infection, and thus may test positive (if infected) with an antibody test, but this is dependent on the person and can take up to 3 months to produce sufficient antibodies (IgG and IgM) to generate a positive result. About 97% of people will develop detectable antibodies during this window period. It is recommended to wait at least 21 days (or 3 weeks) to test for the first time. We do recommend that a second test is taken after 90 days to confirm the result as some people do take longer to develop antibodies. As you were exposed less than 3 months ago, we recommend taking another test at the 90 day point. Thank you.
Not sure what does it mean to have a large drop of blood, it is hard to measure. It would be better to go to a clinic. Don’t waste your money on this !
@Samuel Zhao We agree! Blood collection is an important part of the testing process with INSTI. This video gives a good visual of a blood drop. Please reach out to customercare@biolytical.com if you've tried testing and it didn't work out. The test is so quick and convenient it is nice to have the option of testing at home!
Hello. Thank you for messaging us about your test. Would you be able to send us an email at customercare@biolytical.com with some details regarding the test not working? One of our technical experts can look into this for you.
Hola Christian, Gracias por enviarnos un mensaje. Disculpe mi español ya que no es mi idioma nativo. Para ayudar a responder esta pregunta, es útil explicar cómo funciona la ventana de prueba del VIH. Después de la exposición al VIH, la persona promedio puede tardar de 3 a 12 semanas (21 a 84 días) en desarrollar suficientes anticuerpos para que una prueba de detección los detecte. Esto se llama el período de ventana serológica. Algunas personas pueden producir anticuerpos 21-22 días (aproximadamente 3 semanas) después de la infección y, por lo tanto, pueden dar positivo (si están infectados) con una prueba de anticuerpos, pero esto depende de la persona y puede tomar hasta 3 meses para producir suficientes anticuerpos ( IgG o IgM) para generar un resultado positivo. Alrededor del 97% de las personas desarrollarán anticuerpos detectables durante este período de ventana. Se recomienda esperar al menos 21 días (o 3 semanas) para realizar la prueba por primera vez. Recomendamos que se realice una segunda prueba después de 90 días para confirmar el resultado, ya que algunas personas tardan más en desarrollar anticuerpos. Esperemos que eso ayude. Háganos saber si tiene alguna otra pregunta. Siempre estaremos encantados de ayudar. Mantente a salvo y amable y que tengas una buena semana.
Sorry for the delay in responding to you! Negative and non-reactive means that the INSTI Test did not detect any antibodies for HIV. If the non-reactive result was observed within 3 months from the date of exposure to HIV, then you should test again after 3 months. 3 months is the time is takes for most people to develop antibodies to infection. Thank you for your question. Take Care and Stay Safe!
Hello Ian, That's a great question. The INSTI HIV Self Test is extremely accurate when performed correctly. When discussing accuracy we talk in terms of sensitivity and specificity. The INSTI Self Test has sensitivity of 99.8% which means there is a 0.2% chance of a false negative result. The INSTI Test specificity is 99.5% which means there is a 0.5% chance of a false positive result. You can contact customercare@bioLytical.com anytime should you have any additional questions or concerns. Stay Safe!
Hello - thank you for your message. It is helpful to understand the HIV testing window to understand how rapid tests detect the presence of the HIV virus. If infected with HIV, generally the body will produce antibodies anywhere between 3 and 12 weeks after infection (about 97% of people). This is called the serological window period. This can happen with or without symptoms as not everyone who contracts HIV will develop an acute infection with symptoms. Some individuals may produce antibodies 21-22 days (approximately 3 weeks) after infection and thus may test positive (if infected) with an antibody test, but this is dependent on the person and can take up to 3 months to produce sufficient antibodies (IgG or IgM) to generate a positive result. About 97% of people will develop detectable antibodies during this window period. It is recommended to wait at least 21 days (or 3 weeks) to test for the first time. While some antibody tests can detect HIV antibodies within 21 days (such as the INSTI® test), we do recommend testing again at 3 months as each individual may develop antibodies at different times. If exposed to HIV, tests after 90 days are very reliable. AIDS occurs if HIV is not treated and is considered stage 3. From the CDC: HIV (human immunodeficiency virus) is a virus that attacks the body’s immune system. If HIV is not treated, it can lead to AIDS (acquired immunodeficiency syndrome). So if the patient has AIDS, their viral load would be high enough, that a rapid test should capture this diagnosis. However, we always recommend to confirm with your Dr or medical professional for individual care.
Hello Road to Sweden, Thanks for messaging us. The solution in bottle one (and those in bottles 2 and 3) do not contain live or active HIV. Bottle 1 is used as a diluent and acts to break up (lyses) the red blood cells in the sample. So though you touched the bottle with a wound, you cannot contract HIV through this. Hope that helps. Have a great and safe week ahead!
@@Biolytical Thank you for the answer, but when I called one of the numbers with the test, he told me that it could be a doubt and you have to retake the test after three months
@@bra188 Hello. Thanks for writing back. Relating to the 90 days, this is likely regarding the HIV testing window. After exposure to HIV, it can take the average person anywhere from 3 to 12 weeks (21-84 days) to develop enough antibodies for a screening test to detect them. This is called the serological window period. Some individuals may produce antibodies 21-22 days (approximately 3 weeks) after infection and thus may test positive (if infected) with an antibody test, but this is dependent on the person and can take up to 3 months to produce sufficient antibodies (IgG or IgM) to generate a positive result. About 97% of people will develop detectable antibodies during this window period. It is recommended to wait at least 21 days (or 3 weeks) to test for the first time. However, you would not be exposed due to solution bottle #1. I cannot speak for who you spoke to, but they likely meant when you might have been exposed rather than when you touched the bottle. Hope that helps - but if you have any other questions/concerns, please reach out again.
He said exactly that if you touch the liquid and the wound is open, there is danger, so you must do the test, you must tell people the truth not to touch the liquid because it is dangerous, and do not think about protecting your product only, the health and life of the individual is more important than everything, do not imagine my condition now After hearing what he said this.
@@bra188 Hello. Thank you for sharing your concerns. Please contact our technical support team on 1.866.674.6784 x 200 or customercare@biolytical.com and we’d be happy to provide you with the Safety Data Sheet for the INSTI Test which lists the safety data for each component in the test. There is no risk of being infected with HIV from the INSTI test as there is no HIV present in the product (solution bottles, membrane unit, or any test components.) The test does not detect HIV itself, but the antibodies produced in response to the virus. With regards to the open wound, the recommendation would be to wash your hands thoroughly and follow up with a doctor should you experience any pain or irritation.
Hello Blivx, Thanks for reaching out. This is a great question. After the window period (approximately 3 months, or 84 days), it is extremely rare that a false negative would occur. Specificity is the proportion of people without HIV who will have a negative result using an HIV test. With over 99% specificity, INSTI®’s accuracy is incredibly high, so you can take the test with confidence. There is no requirement to re-confirm a negative result with INSTI® if you took the test 3 months after exposure, however, if you are unsure about the result or participate in higher risk activities, then it’s a good idea to test yourself regularly (every 3 months) or follow up with your doctor or a clinic. Hope this helped and let us know if you have any further questions. Have a great day ahead and stay safe!
@@Biolytical I was exposed to HIV by needle poke in back and got sick after with symptoms like ulcers in mouth,night sweats, fever, chills, cough, diarrhea, sore throat, etc during 14months. I have done 4generation ag/ab, RNA PCR all negative. I just did this test at the health department and it's was negative. Could all these test not detecting HIV?
@@bladebrown4341 Hello Blade, Thanks for your message during what can be an understandable anxious time. If I understand correctly, you were exposed approximately 14 months ago? As you have done the 4th generation test and completed one at the health department, and all were negative, it is unlikely that they would all show incorrectly (false negative). The INSTI® test has over 99% accuracy (both in identifying positive infections and identifying those that are negative), so the test is very reliable. I cannot speak to other tests, but as 97% of people will show antibodies within the 3 months, a positive infection would likely show in the different tests you took. I would recommend speaking to your dr. about the tests for further confirmation or, if they allow, the health department where you took the tests. In some cities (such as across Canada), you can call 811 (a Healthlink number that is free to access) from your phone to speak to a registered nurse who can help provide even more information specific to your situation. I am not sure where you are messaging from, but I have found these numbers helpful and informative. I hope this information has helped. Let us know if you have other questions; we are always happy to answer where we can. Have a safe and kind day ahead.
Hello Daniel - thanks for reaching out. For our test to work, you only require a drop of blood. As the control dot showed up, this shows that the test was performed correctly. Please reach out if you have any questions. Stay safe and have a good weekend!
I did the test and it came negative. I accidentally touched the bottle while dropping the blood. It was very soft and quick contact. The control dot was seen but I want to know if the test is still valid?
Thank you for your question Kanishika. It's OK if you accidentally touched the bottle. If the control dot was clearly visible on the membrane it means your test is valid. If you are unsure of your result you are welcome to send a photo to customercare@bioLytical.com who'd be happy to look at it for you. Take Care and Stay Safe!
Hey Shahrzad, Sorry for the delay. For more information on the INSTI HIV Self Test, check out our website www.insti.com/hiv-self-test/ We recommend that people test themselves after 3 months from the date of exposure, due to the window period for HIV antibody production. If you have been exposed to HIV again or participate in high risk activity then it’s a good idea to be tested regularly, every 3 months. The test is extremely accurate when performed correctly, with fingerstick blood INSTI has 100% sensitivity/99.5% specificity. Thanks for your question. Take Care and Stay Safe!
Hi@@moshhanx9501 .. it depends on where you are located but www.insti.com/ should help you locate a test depending on your geographic region. Hope this helps! If you are in the UK or Canada, you can also get the test through Amazon searching for INSTI HIV Test.
Hello. An invalid response means that the test was not conducted properly. This could be due to not collecting enough blood or storing the kit incorrectly (outside the specified temperature range) as examples. If the control dot does not appear, this means the test was invalid and another test must be conducted.
Thank you for your question. There is no virus present in the solutions and no risk of getting infected with HIV if it touches your finger. Our recommendation would be to make sure you wash your hands thoroughly after using the test.
Hi Terry, Thank you for your message and letting us know your feedback. We are sorry to hear you had a negative experience with our test. While our test has undergone rigorous clinical testing and trials and has a high accuracy of over 99%, we would like to understand further what happened with your individual test as we take all customer feedback seriously. If you are comfortable, please email us at customercare@biolytical.com and we would be happy to speak further and get a better understanding of your concerns.
Bruh I was scared for whole year... test said i was negative
Wich symptoms did you had?
these test negative after 3 months i think, it becomes undetectable
Fucking same brother congratulations
I'm still good
I used the test and the Point on „C side“ shows a light Point. I can barely see it. But its Not unvalid. Does that mean, its negative?
Thanks for your message and patience in a response. The Control dot or point can vary in its intensity, a light dot does mean the test is performed correctly. If you see the “C” dot but do not have a “T” dot, the test is negative. Please reach out if you have any other questions, we are always happy to help. Have a good week and stay safe.
hi, accidentally my finger touched the tip of the bottle with the solution while blood letting. is there any chance ill get infected of the antigens which is in the solution liquid?
as well, 2 drops of blood fell inside the bottle instead of 1
A person is examined on the 15th day of 2 months and gets the correct result??
I tested and saw the C dot looks very weak but it was negative for 20 min, after 20 min i pressed with my finger in the membrane then another dot appeared, what does that mean?
Hello. It is ok if the C dot appears lighter than the instructions or training video. As long as the membrane shows the C dot, it means the test was performed correctly. Regarding the second dot that appeared once you pushed the membrane with your finger.
The INSTI flow-through (immunofiltration) platform is designed to provide immediate reactions without the need for physical pressure or longer reaction times. In some situations where the procedure may have a user fault condition, such as applying physical pressure to the membrane or going past the reaction time (over 1 hour), non-specific binding can occur, and a second dot can occur.
Basically, results after physically touching the membrane (and past the one-hour mark) should not be considered, but as this happened after the test that was valid (control dot), the result would be interpreted as non-reactive.
@@Biolyticalhow accurate is this test result , around 46 days of exposure, I know some window period is 90 days
@@gohaniv8134 Thanks for your question. After exposure to HIV, it can take the average person anywhere from 3 to 12 weeks (21-84 days) to develop enough antibodies for a screening test to detect them. This is called the serological window period. Some individuals may produce antibodies 21-22 days (approximately 3 weeks) after infection and thus may test positive (if infected) with an antibody test, but this is dependent on the person and can take up to 3 months to produce sufficient antibodies (IgG or IgM) to generate a positive result. About 97% of people will develop detectable antibodies during this window period.
It is recommended to wait at least 21 days (or 3 weeks) to test for the first time. We also recommend testing again at the 90 day mark as different individuals can develop antibodies in different timeframes.
Hello, I took the test and it came back negative, but it wasn't shining like in the picture, it was just faint but distinct. Is my test correct?
Hello, thanks for reaching out to us. The dot you see may not appear as dark as in the picture. But as long as you see a dot, even if it is faint - this means the test was conducted properly.
Hello I did the test came back negative, when I was doing the one drop blood I accidentely touched the bottle, I just pitted the plaster after. Is there any chance of getting hiv from this test ? Thank you
Hello Nr Bhr. Thanks for messaging us. There is no risk of being infected with HIV from the INSTI Test. There is no HIV present in the product (solution bottles, membrane unit, or test components). The INSTI HIV-1/2 Antibody Test does not detect HIV itself but rather the antibodies produced in response to the virus.
The INSTI® test uses the gp41 and gp36 antigens. Antigens are only small bits/parts of the virus and are not infectious. HIV would need to be completely intact for it to be infectious.
Hope that helps explain for you!
Have a good day and stay safe!
@@Biolytical Hello, the g41 and gp36 antigens are in the blue or white bottle ? Thank you
@@nrbhr9100 Hello. The g41 and gp36 are the antigens (recombinant proteins) that are blotted onto the membrane and attach to the antibody in the blood sample. So they are not in the bottles but are blotted onto the membrane (where you drop the solutions into). Hope that helps. Stay safe and have a good week.
Non.reactive means
Surakant Andhale negative
Means negative
It means your test was failed, so you need to try again.
@@RassBrass No, it isn't.
Hi there I have tested myself after more than 90 days after my last suspected exposure and been tested negative, now should i go see a clinic to re-confirm for another test or Is this device’s result is legit??
That’s a great question. With INSTI, our recommendation is that if a negative result is observed, the individual should test again at 3 months from the date of exposure. Most people who become infected with HIV will develop detectable antibodies within this timeframe. There is no requirement to re-confirm a negative result with INSTI after 3 months, however, if you are unsure about the result or participate in higher risk activity then it’s a good idea to test yourself regularly (every 3 months) or follow up with a doctor or clinic. Take Care and Stay Safe!
bro have u face any symptoms
@@Aerosandeep_ yes I had symptoms
@@sussusjr5333
Are you ok bro ?
How accurate is this test at 21 days after potential exposure?
Hello. Thanks for reaching out. To help you understand how HIV testing works and when tests can detect an infection, here is some information on the testing window.
After exposure to HIV, it can take the average person anywhere from 3 to 12 weeks (21-84 days) to develop enough antibodies for a screening test to detect them. This is called the serological window period. Some individuals may produce antibodies 21-22 days (approximately 3 weeks) after infection and thus may test positive (if infected) with an antibody test, but this is dependent on the person and can take up to 3 months to produce sufficient antibodies (IgG or IgM) to generate a positive result. About 97% of people will develop detectable antibodies during this window period.
As you tested more than 21 days after exposure, it is possible that you are within the timeframe to test. However, as it is under 90 days (3 months), we do recommend to take another test at three months to confirm as some people do take longer to develop antibodies.
My control dot was visible but was not in blue colour.
same ...
Sir nenu 40 days hiv rapid test chepichanu sir iam safe or no plzz reply me sir
Hello. If I understand you correctly, you are asking if you can take an HIV test after being possibly exposed 40 days before. To help answer, it is useful to understand the testing window.
After exposure to HIV, it can take the average person anywhere from 3 to 12 weeks (21-84 days) to develop enough antibodies for a screening test to detect them. This is called the serological window period. Some individuals may produce antibodies 21-22 days (approximately 3 weeks) after infection, and thus may test positive (if infected) with an antibody test, but this is dependent on the person and can take up to 3 months to produce sufficient antibodies (IgG and IgM) to generate a positive result. About 97% of people will develop detectable antibodies during this window period. It is recommended to wait at least 21 days (or 3 weeks) to test for the first time. We do recommend that a second test is taken after 90 days to confirm the result as some people do take longer to develop antibodies.
As you were exposed less than 3 months ago, we recommend taking another test at the 90 day point.
Thank you.
Not sure what does it mean to have a large drop of blood, it is hard to measure. It would be better to go to a clinic. Don’t waste your money on this !
@Samuel Zhao We agree! Blood collection is an important part of the testing process with INSTI. This video gives a good visual of a blood drop. Please reach out to customercare@biolytical.com if you've tried testing and it didn't work out. The test is so quick and convenient it is nice to have the option of testing at home!
my test didn’t work at all !
Hello. Thank you for messaging us about your test. Would you be able to send us an email at customercare@biolytical.com with some details regarding the test not working? One of our technical experts can look into this for you.
Disculpe a los 30 días q tan seguro es me pueden ayudar
Hola Christian,
Gracias por enviarnos un mensaje. Disculpe mi español ya que no es mi idioma nativo.
Para ayudar a responder esta pregunta, es útil explicar cómo funciona la ventana de prueba del VIH.
Después de la exposición al VIH, la persona promedio puede tardar de 3 a 12 semanas (21 a 84 días) en desarrollar suficientes anticuerpos para que una prueba de detección los detecte. Esto se llama el período de ventana serológica. Algunas personas pueden producir anticuerpos 21-22 días (aproximadamente 3 semanas) después de la infección y, por lo tanto, pueden dar positivo (si están infectados) con una prueba de anticuerpos, pero esto depende de la persona y puede tomar hasta 3 meses para producir suficientes anticuerpos ( IgG o IgM) para generar un resultado positivo. Alrededor del 97% de las personas desarrollarán anticuerpos detectables durante este período de ventana. Se recomienda esperar al menos 21 días (o 3 semanas) para realizar la prueba por primera vez.
Recomendamos que se realice una segunda prueba después de 90 días para confirmar el resultado, ya que algunas personas tardan más en desarrollar anticuerpos.
Esperemos que eso ayude. Háganos saber si tiene alguna otra pregunta. Siempre estaremos encantados de ayudar.
Mantente a salvo y amable y que tengas una buena semana.
Nagative ani non reactive means
Sorry for the delay in responding to you! Negative and non-reactive means that the INSTI Test did not detect any antibodies for HIV. If the non-reactive result was observed within 3 months from the date of exposure to HIV, then you should test again after 3 months. 3 months is the time is takes for most people to develop antibodies to infection. Thank you for your question. Take Care and Stay Safe!
How accurate is this test and what is the probability of getting a false negative
Hello Ian, That's a great question. The INSTI HIV Self Test is extremely accurate when performed correctly. When discussing accuracy we talk in terms of sensitivity and specificity. The INSTI Self Test has sensitivity of 99.8% which means there is a 0.2% chance of a false negative result. The INSTI Test specificity is 99.5% which means there is a 0.5% chance of a false positive result. You can contact customercare@bioLytical.com anytime should you have any additional questions or concerns. Stay Safe!
Can the test detect aids or long time hiv ?
Hello - thank you for your message. It is helpful to understand the HIV testing window to understand how rapid tests detect the presence of the HIV virus.
If infected with HIV, generally the body will produce antibodies anywhere between 3 and 12 weeks after infection (about 97% of people). This is called the serological window period. This can happen with or without symptoms as not everyone who contracts HIV will develop an acute infection with symptoms. Some individuals may produce antibodies 21-22 days (approximately 3 weeks) after infection and thus may test positive (if infected) with an antibody test, but this is dependent on the person and can take up to 3 months to produce sufficient antibodies (IgG or IgM) to generate a positive result. About 97% of people will develop detectable antibodies during this window period. It is recommended to wait at least 21 days (or 3 weeks) to test for the first time. While some antibody tests can detect HIV antibodies within 21 days (such as the INSTI® test), we do recommend testing again at 3 months as each individual may develop antibodies at different times.
If exposed to HIV, tests after 90 days are very reliable. AIDS occurs if HIV is not treated and is considered stage 3.
From the CDC: HIV (human immunodeficiency virus) is a virus that attacks the body’s immune system. If HIV is not treated, it can lead to AIDS (acquired immunodeficiency syndrome).
So if the patient has AIDS, their viral load would be high enough, that a rapid test should capture this diagnosis. However, we always recommend to confirm with your Dr or medical professional for individual care.
I touched the substance that is in the red vial with the wound, is there a possibility, even slight, that I contract HIV?
Hello Road to Sweden,
Thanks for messaging us. The solution in bottle one (and those in bottles 2 and 3) do not contain live or active HIV. Bottle 1 is used as a diluent and acts to break up (lyses) the red blood cells in the sample.
So though you touched the bottle with a wound, you cannot contract HIV through this.
Hope that helps. Have a great and safe week ahead!
@@Biolytical Thank you for the answer, but when I called one of the numbers with the test, he told me that it could be a doubt and you have to retake the test after three months
@@bra188 Hello. Thanks for writing back. Relating to the 90 days, this is likely regarding the HIV testing window. After exposure to HIV, it can take the average person anywhere from 3 to 12 weeks (21-84 days) to develop enough antibodies for a screening test to detect them. This is called the serological window period. Some individuals may produce antibodies 21-22 days (approximately 3 weeks) after infection and thus may test positive (if infected) with an antibody test, but this is dependent on the person and can take up to 3 months to produce sufficient antibodies (IgG or IgM) to generate a positive result. About 97% of people will develop detectable antibodies during this window period. It is recommended to wait at least 21 days (or 3 weeks) to test for the first time.
However, you would not be exposed due to solution bottle #1. I cannot speak for who you spoke to, but they likely meant when you might have been exposed rather than when you touched the bottle.
Hope that helps - but if you have any other questions/concerns, please reach out again.
He said exactly that if you touch the liquid and the wound is open, there is danger, so you must do the test, you must tell people the truth not to touch the liquid because it is dangerous, and do not think about protecting your product only, the health and life of the individual is more important than everything, do not imagine my condition now After hearing what he said this.
@@bra188 Hello. Thank you for sharing your concerns. Please contact our technical support team on 1.866.674.6784 x 200 or customercare@biolytical.com and we’d be happy to provide you with the Safety Data Sheet for the INSTI Test which lists the safety data for each component in the test. There is no risk of being infected with HIV from the INSTI test as there is no HIV present in the product (solution bottles, membrane unit, or any test components.) The test does not detect HIV itself, but the antibodies produced in response to the virus. With regards to the open wound, the recommendation would be to wash your hands thoroughly and follow up with a doctor should you experience any pain or irritation.
What are the chances of a false negative 8 months after exposure with no further risk?
Hello Blivx,
Thanks for reaching out. This is a great question. After the window period (approximately 3 months, or 84 days), it is extremely rare that a false negative would occur.
Specificity is the proportion of people without HIV who will have a negative result using an HIV test. With over 99% specificity, INSTI®’s accuracy is incredibly high, so you can take the test with confidence.
There is no requirement to re-confirm a negative result with INSTI® if you took the test 3 months after exposure, however, if you are unsure about the result or participate in higher risk activities, then it’s a good idea to test yourself regularly (every 3 months) or follow up with your doctor or a clinic.
Hope this helped and let us know if you have any further questions. Have a great day ahead and stay safe!
@@Biolytical I was exposed to HIV by needle poke in back and got sick after with symptoms like ulcers in mouth,night sweats, fever, chills, cough, diarrhea, sore throat, etc during 14months. I have done 4generation ag/ab, RNA PCR all negative. I just did this test at the health department and it's was negative. Could all these test not detecting HIV?
@@bladebrown4341 Hello Blade,
Thanks for your message during what can be an understandable anxious time. If I understand correctly, you were exposed approximately 14 months ago? As you have done the 4th generation test and completed one at the health department, and all were negative, it is unlikely that they would all show incorrectly (false negative). The INSTI® test has over 99% accuracy (both in identifying positive infections and identifying those that are negative), so the test is very reliable. I cannot speak to other tests, but as 97% of people will show antibodies within the 3 months, a positive infection would likely show in the different tests you took.
I would recommend speaking to your dr. about the tests for further confirmation or, if they allow, the health department where you took the tests. In some cities (such as across Canada), you can call 811 (a Healthlink number that is free to access) from your phone to speak to a registered nurse who can help provide even more information specific to your situation. I am not sure where you are messaging from, but I have found these numbers helpful and informative. I hope this information has helped. Let us know if you have other questions; we are always happy to answer where we can. Have a safe and kind day ahead.
i couldnt get a lot of blood from my finger.but i got one bright red line on the Control section.does it mean it worked?
Hello Daniel - thanks for reaching out. For our test to work, you only require a drop of blood. As the control dot showed up, this shows that the test was performed correctly. Please reach out if you have any questions. Stay safe and have a good weekend!
I did the test and it came negative. I accidentally touched the bottle while dropping the blood. It was very soft and quick contact. The control dot was seen but I want to know if the test is still valid?
Thank you for your question Kanishika. It's OK if you accidentally touched the bottle. If the control dot was clearly visible on the membrane it means your test is valid. If you are unsure of your result you are welcome to send a photo to customercare@bioLytical.com who'd be happy to look at it for you. Take Care and Stay Safe!
@@Biolytical Thank you for the clarification. I also sent an email with a photo of the results to make sure.
Why does it say go back in three months ?
If you were recently infected with HIV sometimes it can take up to 3 months before it will show a positive result.
Hi. What's the accuracy of the insti rapid test 8 months post exposure?
Hey Shahrzad, Sorry for the delay. For more information on the INSTI HIV Self Test, check out our website www.insti.com/hiv-self-test/ We recommend that people test themselves after 3 months from the date of exposure, due to the window period for HIV antibody production. If you have been exposed to HIV again or participate in high risk activity then it’s a good idea to be tested regularly, every 3 months. The test is extremely accurate when performed correctly, with fingerstick blood INSTI has 100% sensitivity/99.5% specificity. Thanks for your question. Take Care and Stay Safe!
@@Biolyticalhi how to get the kit
Hi@@moshhanx9501 .. it depends on where you are located but www.insti.com/ should help you locate a test depending on your geographic region. Hope this helps!
If you are in the UK or Canada, you can also get the test through Amazon searching for INSTI HIV Test.
What the invalid means?
Hello. An invalid response means that the test was not conducted properly. This could be due to not collecting enough blood or storing the kit incorrectly (outside the specified temperature range) as examples. If the control dot does not appear, this means the test was invalid and another test must be conducted.
Hiio
if the liquid from the solution accidentally touches the skin, is there a risk of HIV? Is the virus in the solution?
Thank you for your question. There is no virus present in the solutions and no risk of getting infected with HIV if it touches your finger. Our recommendation would be to make sure you wash your hands thoroughly after using the test.
Many scams in the comment section
Waste of money
Hi Terry,
Thank you for your message and letting us know your feedback. We are sorry to hear you had a negative experience with our test. While our test has undergone rigorous clinical testing and trials and has a high accuracy of over 99%, we would like to understand further what happened with your individual test as we take all customer feedback seriously.
If you are comfortable, please email us at customercare@biolytical.com and we would be happy to speak further and get a better understanding of your concerns.