JPRC Axial RR10 Bomber Upgrades - RCRUN Piggyback Shock Tuning

Sdílet
Vložit
  • čas přidán 11. 07. 2024
  • Click bit.ly/sub2jprc to SUBSCRIBE
    Thanks for the long wait and this is my final review of this RCRUN piggyback shocks. They are great looker but do they perform as good as they look? Watcing the video to find out and I will show you how to build these shock with no air bubbles in side and tune them right for your ride.
    Skip to 5:44 for the shock build section. • JPRC Axial RR10 Bomber...
    Also check out these parts from STRC used in my RR10 Bomber on STRC official website.
    www.teamstrc.com/index.php?rou...
    I picked up these from an the “ RC Factory Store” on AlixExpress seller from China. www.aliexpress.com/store/818238
    www.aliexpress.com/store/produ...
    www.aliexpress.com/store/produ...
    RADIO CONTROL NETWORK (MCN)
    Come join the only Radio Controlled Multi Channel Network on CZcams! bit.ly/1PPNaRA
    RADIO CONTROL NETWORK (MCN)
    Come join the only Radio Controlled Multi Channel Network on CZcams! bit.ly/1PPNaRA
    JPRC SOCIAL MEDIA
    Facebook - / jprchobbies
    Twitter - / jprchobbies
    "Royalty Free Music by audiomicro.com/royalty-free-music"
    © JPRC Hobbies, All Rights Reserved.
  • Auta a dopravní prostředky

Komentáře • 42

  • @949Designs
    @949Designs Před 7 lety +1

    Another great how-to instructional video in the can. Thanks Joe 🤙🏼

  • @StefTom
    @StefTom Před 7 lety +1

    Met those shocks already, thanks for clue.

  • @JoeOvercoat
    @JoeOvercoat Před 3 lety

    1:04 Ha! You should have seen my face when I went to put the last two screws in, only to find that very fitment issue. I felt like Cinderella's step sister where my shock 'foot' would not fit in the link 'shoe'. Thank you for providing a solution (meanwhile I switched to a scaler shock with next to no 'foot').

  • @thomaswoolsey2602
    @thomaswoolsey2602 Před 8 lety +1

    Great video...

  • @troykneeee7104
    @troykneeee7104 Před 8 lety +1

    You are awesome man

  • @lungocicorneliu1119
    @lungocicorneliu1119 Před 8 lety

    Nice video.

  • @333bernsie
    @333bernsie Před 5 lety

    Hi Joe, what are you using for front lower links? They look awesome ! Thanks for the great vids.

  • @isidroborrasalvaro1625

    Q medida tienen los amortiguadores por favor.se los voy a colocar a mí bomber.no estoy seguro si pedirlos de 12,3cm o12,5cm.muchas gracias,seguid trabajando así!

  • @closed2459
    @closed2459 Před 4 lety +1

    Thank you an i think u dissed them enogh ill be only one on my block with a set

  • @TheSunsun210
    @TheSunsun210 Před 4 lety

    Hello, i'm want to ask what tire are you using ? And where can buy it ? Thank you so much :)

  • @evans9825
    @evans9825 Před 7 měsíci

    You dont need double shocks. And get rid of the stock trailing arms. I have tuned mine perfectly!

  • @josesanchez5800
    @josesanchez5800 Před 6 lety

    At the end me buying a kit ,, 1000 dollars be ok to build a custom one without elect, thanks ,awesome build

  • @braderickson208
    @braderickson208 Před 7 lety

    I can't find the shocks you bought can you give me a direct link?

  • @MrDavide1976
    @MrDavide1976 Před 7 lety

    Hi JPRC! do you know about any "double steering" upgrade for this kit?? I can't find anything, maybe i need to ask directly to axial custome service.....Thanks in advance for any answer....

    • @JPRC
      @JPRC  Před 7 lety

      +MrDavide1976 you mean 4 wheel steering? The bomber and wraith have same axles and you can take the part most from wraith for the most part to do the same. Here is how axial did it www.axialracing.com/blog_posts/903300000

    • @MrDavide1976
      @MrDavide1976 Před 7 lety

      Hi! Yes, 4 wheel steering, sorry, by the way, i knew about the link you gave me, but i thought it was for wraith only. I'm going to get a bomber so now i don't really know its framework, and i don't know wraith's framework neither, i never put my hands on them. thanks for the help...

  • @Jason-rt4hk
    @Jason-rt4hk Před 3 lety

    when i screw the thumb screw down it pushes all the oil out of the reservoir

  • @romeoblanco9569
    @romeoblanco9569 Před 8 lety

    I have a question, Can you do the same thing with yeti trophy truck? Like doing The dual shock setup in the rear of the trophy truck?

    • @JPRC
      @JPRC  Před 8 lety

      Note these shocks are only 123mm the yeti needs at least 145 mm in the rear second shock position

    • @romeoblanco9569
      @romeoblanco9569 Před 8 lety

      +JPRC so you can't do that?

  • @tyhardy4594
    @tyhardy4594 Před 8 lety

    Hey man I bought a set of these shocks... I keep having issues with the hose getting bubbles in them and the hose will either pop and split or it will get a bubble and stay that way.
    do you have any ideas on why it does that or any ways to fix it?

    • @JPRC
      @JPRC  Před 8 lety

      It happens where the oil is over filled and I found the blue tube and 10w oil. I reported the same issue to the seller hopefully they will make some with stronger tubes

    • @zozateem
      @zozateem Před 7 lety

      Hi JPRC, i'm planning to buy this shocks, but i'm a little bit afraid of this issue.. Have you got this problem yet on this beauty, or have you solved this problem? My girlfriend has a Bomber, and i'm looking for the same setup than you :)

  • @marvinwood1041
    @marvinwood1041 Před 5 lety +1

    Which do you like better the hot racing or the rc run shocks?

    • @JPRC
      @JPRC  Před 5 lety +1

      Marvin Wood the Rcrun only adds to the look and doesn’t do much in performance due to the small diameter. I went back axial and proline shocks and the setup solely for performance instead of scale look.

  • @tyhardy4594
    @tyhardy4594 Před 8 lety

    What should I do if my hose is all been used. can you get some replacement hoses for it?

    • @JPRC
      @JPRC  Před 8 lety

      i see they sell on ebay now maybe you can message them there?

  • @223jacob
    @223jacob Před 7 lety

    The problem I have is where I install a rear shocks the top there's the piece that's blocking it and I don't know how to move it. I got the bottom one moved but not the top. Please reply

    • @223jacob
      @223jacob Před 7 lety

      JPRC man I just forgives it out I looked closer into your vid and found out how to do it. Thank you!

  • @tyhardy4594
    @tyhardy4594 Před 8 lety

    do you know if anyone sells any hoses that can take place of the stock ones?

    • @JPRC
      @JPRC  Před 8 lety

      not that i am aware of. but you can stick to 10w oil and careful not to overfill. you should do ok.

  • @bcag3907
    @bcag3907 Před 8 lety

    What rims do you have on there?

    • @JPRC
      @JPRC  Před 8 lety +1

      Those are stock rtr wheel just painted silver/yellow/Matte clear

  • @tiziano316
    @tiziano316 Před 6 lety +1

    Those shocks are like shit, they leak everywhere, near the pipe tube goes into the shock, they are a nightmare, please choose other shocks... damn! It's 2 days i'm turning crazy with them!

  • @Jason-rt4hk
    @Jason-rt4hk Před 3 lety

    these shocks suck every time i put it together and cycle it a few times it fills up with air and i sealed everything 3 different times. don't buy these there less than junk

  • @jgrc5575
    @jgrc5575 Před 7 lety

    Hey joe I ended up purchasing these shocks and mine leak really bad after following every step of your video any suggestions?

    • @JPRC
      @JPRC  Před 7 lety +1

      JGRC try AE green slime to treat your oring I do it on all my shock tunings

    • @jgrc5575
      @jgrc5575 Před 7 lety +1

      JPRC awesome thank you. Your videos are sweet👍🏻

    • @ExpoXj1
      @ExpoXj1 Před 6 lety

      mine came with no o rings for the resivore plunger. leaks out every drop.