8 beeps and black screen Dell Inspiron N5010 VGA Fix
Vložit
- čas přidán 21. 01. 2017
- Warning!!!! Do this at your own risk. 8 beeps and black screen Dell Inspiron N5010 VGA Fix.
Best Laptops With Good Specifications:
www.computertipslaiju.com/sea...
here is the solution for Dell Inspiron N5010/N5110 black screen and 8 beep problem.
Related Videos:
8 beeps and black screen Dell Inspiron N5010 VGA Fix
• 8 beeps and black scre...
LG Keyboard replacement: LG P420 or LGP42
• LG Laptop Keyboard rep...
Broken LED Screen Replacement hp 2000
• LED Screen Replacement...
toshiba satellite L510 power jack repair
• Toshiba Satellite L510...
TOSHIBA SATELLITE C 50 Hard Disk Replacement
• TOSHIBA SATELLITE C50 ...
Sony VAIO VGN CS36 CPU Fan Repair
• Sony VAIO VGN CS Serie...
Fantastic. Worked a treat. Will see how long it stays fixed. Obvious a dry solder joint that developed and reheating has re-joined the solder. Only difference on my Dell was that the key board had 2 pieces of double sided tape under the W and R key area which required me to slide a credit type card under the key board to break the stick.
No idea why this worked but truely grateful that it did. Thank you for sharing.
Thank you for uploading this video, it worked perfectly.
Thanx u sir ..My laptop dell problem sol...I like your video..
Jat se samaj me Yaya video bhi bahut acha editing Kiya..
AAP ki sab deatils follow kr ke parfact work huwa..
Thanks sir
I had my laptop fixed from your video. Bravo👌, Thanks a lot for Sharing 👍
THANK YOU SO MUCHHHHH!!!! YOU JUST SAVED MY JOB SIR👌👌
Love this video Man! Would be happen in future this same problem?
This man is really great! Thnx for tour a video!!
Perfect. That's THE solution. It worked like a charm. Thank you very much. 👍
WORKED PERFECTLY!!! THANK YOU SO MUCH!!! BEST VIDEO!!! SAVED MY MONEY.
Dada how much time you blew the hot air on cpu?
Tanjila Antara hmm it’s been long time ya .. am guessing for like 30 seconds? Not sure
Bro kitni money lagti ha ha ise sahi karvane me
@@AshokYadav-pc9eg it's graphics card issue, to fix it will cost you AED 140
@@tahanunchowdhury3190 bro in rupee
If your screen is completely dark and power+D doesn't work for you may have loose connection of the flex cable i. e, display cable that connects the screen to the mother board at either ends . Try opening the laptop and properly connect the cable
Not working.
Muito obrigado. Funcionou perfeitamente. (Thank you very much. Worked perfectly.)
Você poderia me explicar o que ele fez? Por favor
Ele resetou a Bios?
Thank you sooo much brother❤
Nothing worked for me until i saw this video of yours thank you once again! SUBBED
Thank you very much for the information computer works to be good !!
you comment 3 years ago i wondered if the reflow still working or it failed again? thank you
Thanks mate. Work fine for me.
try press nd hold letter D and press power.. if its still beeps turn off laptop nd repeat.. i have done this for 2 hrs and then my laptop started doing screen test and now its working fine.. :-)
Thanks man!!
eric brown.. Thanks .. It Worked ..
Hey man! It works! Thanks a thousand!
U mean u Sat like that for two hours straight??
@@anasdynamite9770 bhai sahi me thik hogya kya?
Real man..... Thank you Bro..............
Thank you so much brother.. it works like magic..
It worked ...thank you
Good instruction. I was getting the four beep code and no screen but before replacing any ram remove and reinstall each stick and try start up. Worked for me.
Very good work!!! Do you know why an alienware R4 17 would be giving the 8 beeps and no boot up or anything?? Regards
My DELL Inspiron N5010 got 8 beeps and black screen just yesterday. I am not sure if I am going to do a reheating just like you did, or to remove old thermal paste and apply new thermal paste on the GPU and CPU. Please share with me your thought. Thanks.
worked . thanks
THX THX THX;) Your solution works! Interesting for what time :)
until you overheat that chipset again. ;) keep it cool.
Any time from 10 min is a bonus
What he did is called reflow.. It solve the problem just for while.. The problem will return for sure.. The correct mode to repair definity is reballing the graphic chipset with new solder.. Good technician use this method only to see if the problem is really the chipset's solder.. If the laptop return to life like this video you should reballing the chip with a new esphere solder and resolder again in the motherboard.. After that the laptop will work for many years again
Pls can you tell me that if i go to a technician how much would it cost to repair it
I'm sorry but this is bad info, just watch Louis rossman channel. The GPU itself is defective, due to it's flip chip design nature. The bump are dead in the chip itself ! No way to fix it. You could check my theory by heating a bad chip to 100c just for 30 seconds. It will work again for some time and this temp is low enough that it won't even melt pb free solder. The only solution is to replace the chip itself, this is what I did on my 5010 but the issue would happen again, as all these chips are defective from factory. The underfill used is too soft and the chip layout has bad spread of the temp internally resulting in temperature in a wide range of temperatures within the die area, this resulting in killing the chip even faster.
The other thing you could do, which is a better solution overall is to mod the main board to use integrated graphics. There is a lot of tutorial on CZcams for this particular board. This way, you will never have a failed GPU again 👍🤣
Do you have to heat to 250° C? Will a hairdryer on high do?
Can apply also for dell n3010? Soeans for this issue just need to heating only?
Thanks sir erik
I have applied it once. Can I apply same again?
Hi, upadted BIOS then this started to happen,black screen and beeps. Can this video be related to my problem? Thanks
Sir apja shop kaha pe hai...
Thanks 👍✌
Try Solution 1, if it dont work ,try solution 2 and if even it doesnot work ,try 3.
1st Solution.
1.Unplug battery and leave the laptop without battery for 1 minute.
2.COnnect battery and before turning on the computer, press D on keyboard.
3. Now turn on computer.
4. Keep pressing D even when its beeping ,Dont leave it untill the screen turns green and Blue.
5. Now it will turn on.
2nd Solution:
1.Turn on your laptop and keep pressing F12.
2.If you get to BIOS menu with blue screen and white fonts.Your display is fine.
3.Reset the BIOS settings.
3rd Solution:
1.Connect a VGA cable to the laptop and a external monitor.
2. Turn on monitor and turn on laptop.
3. If it works fine on external monitor. You should replace your lcd screen of your laptop or seek help from your local laptop repair shop
adam jamaica , Thanks! Although I have a different model of DELL laptop, the first solution worked for me. There isn't any blank screen but the beep sound still continues everytime I open the laptop
adam jamaica on solution 1, how long does it usually take to turn blu and green
adam jamaica exactly this is what it is it's either the LCD or the LCD screen you cannot go wrong with it or I'm sorry the Wi-Fi cable and the camera why the hell he opened all that and he heat up the processor and all that hey buddy I would like to tell him that everybody know how 2 take a laptop apart
Put the laptop on charge and press D while pressing D press the power button. That is the way to test your laptop s screen.
8 time beep, laptop on and press hold D button screen diagnostic random color but when complete this process and again automatically restart then again going on 8 time beep
Wowwww thanks a lot
A good method to repair it
Hey please your video worked very well with me the lap top started up and worked for almost 10 mins then the beeps started again and again black screen :/ what to do now?
Get a new video card if the computer is worth it
hello, pls tell me, why did you heat the GPU/VGA? or what else did you do with that? only heated?
thanks a lot, this is so important to me
Only Heating GPU is enough. If it doesn't fix, consider replacing vga chip.
@@ComputerTipsLaiju it is dead, this repair didnt help, so,
We should buy a new one
I don't have a blower so Wat can I use as a alternative ..?
Cook it..in oven
I don't know why but somehow it worked.....i did it my self at home ...
How much does this process gonna cost
What was the exact problem, Sir?
Hi I have same laptop with same problem but I am not repairer or technician to do this so could you please hel me out?
Hi there
My Dell Laptop N4010 has same problem. I repaired, but after 40 days of the same issue. why this problem came after. I want to know.
You need reballing the chipset to repair definity the motherboard.. Reflowing the chipset like this video will just work for some weeks.
Η οθονη δεν γινεται πρασινο και μπλε. κανει κυκλο τα χρωματα 2 φορες και κλεινει. καμια ιδεα? ευχαριστω
So , no flux added !!..250 degree and how much air !..for how time !..thank for the video
In this video he blew hot air for approximately 1 minute and 40 seconds from 6.27 to 8.07. you can recheck in the video
My laptop died... now hdd led not blinking... RIP
When my dell Inspiron N5010 laptop powers on, it produce 13 beeps first. Then 8 beeps at an interval of 3 seconds. Is anyone knows the issue pls replay
Mine too had the same problem. I didn't had the courage or tools to do it my self, I went to a local service center & they told me they re-balled it it worked for around 8-9 months. Now same problem they serviced it some way and it last only 3 days, now they say nothing to do. It's a total loss.
Now they say they can buy back full laptop for ₹2000/-
Is there any way to fix it...?
That's what they do stupid fucks they trying to make quick bucks
@@thothtrismegistus929 totally agree. I can't fix my laptop same problem with beeps and black screen? Please help
You can try by pressing power button and D key from keyboard simultaneously repeat it until u get ur screen display 100%working solutions!
namaste sir mera laptop dell n4010 he us ka 8 times beep aa raha he aur display bhi nahi aa raha he aur agar us ko other vga port se display connect kare to aaraha he display to us ka problem kay he sir plz help me sir plzzzzz
I have the same laptop like him and my laptop is doing the same thing
Mera bhi laptop ka same problem hai kya aap humai help kar saktai hai
Same problem here
But when i connected hdmi into a tv screen ,laptop opens..but the screen on laptop doesnt turn on
In that way i copied my important files.
But what is the problem
Is it the screen
Or the vga chip
Can we run laptop without vga chip using hdmi cable?
Hope for a quick response
Toh yaha comments garnu aie pugis saley tallai mo rack garchu bujhis
Same here bro. Did you fix it?
what is the source of heat I can get ?
And what is the distance between the source of heat and VGA ?
What tools would i need?
I think the computer would have said, "WINDOWS WAS NOT SHUT DOWN CORRECTLY" when you restarted the computer but yours didn't, HMMMMMM
The cpu of my laptop is wet,there are some wet gray slippery things around the cpu! What should i do now?😑
Agar ye prblm he to Esake liye kitna charges lega operator?
Don't do anything just leave your laptop unused for 2 or 3 days. It works
Really,?
@@mannumuttupaiyan8549 yes bro I am not joking.
@@anujdhumal9114 same issue in my dell... i3😏
After this problem i kept my laptop untouched for more than a years still it having the same prblm
8 time beep, laptop on and press hold D button screen diagnostic random color but when complete this process and again automatically restart then again going on 8 time beep
I become successful after watching this video....
My question how long laptop will work after this
until it overheats again/chipset. if the bottom of your laptop gets warm....well, it's overheating. :)
This cooling system is a piece of shit. I do BGA reballing, i replaced the chip with a new one. So far so good, i saw that there is just one screw and a phat 2 mm thermal pad, which performs awful. No proper contact with the heatsink. The actual problem is only based on the 1 screw that tightens just one side, intentionally built to burn the chip. I tried several improvisations and solutions, ended up in a 8 beep code with a new chip, after a short time. The cooler was spinning pretty high all the time. I don`t know if the chip is burnt, i measured it, the series values changed somehow, not much but they are different. The only one to blame for all this is Dell. They made this nice looking laptop to barely survive one year intensive use.
According to experts if it works at all your lucky and a reflow which is what he did on the video card sometimes lasts a week or months but it really considered temporary. If it is working BACK IT UP WHILE YOU CAN
There is no real solution until you properly modify the heatsink and assure that you have proper contact with the die of the chip. Other than that everything else is a waste of time. A thermal pad thicker than 1mm is a awful solution for chip cooling. Adding just one screw to one side is the ultimate bullshit. Dell could have done it the right way. But hey, who will buy a new laptop if this crap here works more than 2 or 3 years.
@@Derricky007 this computer is working for me 8 years so far heavy use with 3 reflows done ,i know its some kind of sorcery :D , but you are right about the shit design , the chip isnt even touching heatsink on my coputer i had to put a puddle of thermal paste just to make a contact
Isme kitna kharcha hoga...
continually beeps sounds come from dell inspiron 3000 series how to fix it.
Bhai nahi hoga
shekhar kumar sah have you fixed it? My laptop is 3000 series too
Don't just heat a dead chip please 😅, just watch Louis rossman channel. The GPU itself is defective, due to it's flip chip design nature. The bump are dead in the chip itself ! No way to fix it. You could check my theory by heating a bad chip to 100c just for 30 seconds. It will work again for some time and this temp is low enough that it won't even melt pb free solder. The only solution is to replace the chip itself, this is what I did on my 5010 but the issue would happen again, as all these chips are defective from factory. The underfill used is too soft and the chip layout has bad spread of the temp internally resulting in temperature in a wide range of temperatures within the die area, this resulting in killing the chip even faster.
The other thing you could do, which is a better solution overall is to mod the main board to use integrated graphics. There is a lot of tutorial on CZcams for this particular board. This way, you will never have a failed GPU again 👍🤣
Is their other ways to fix a laptop?
What if you keyboard is not coming out
8 Beeps is the LVDS cable or screen and not the graphic chip
uhhhhh 99% of time it is the graphics/chipset chip that needs heat treated (reflowed). rarely have I seen it to be the cable or screen. I have but rarely.
Mines too
How much money will take a repairer if he will fix it .
Help 7 time beeps???? Ayuda
u do the same thing as he did in the video.
7 beeps?
too much work man!
Are ye sun glasss dadaji k chasmewala glass se sun me rakh k b kar sakte he kya ????haa to karo like nahi to comment karo
wow
Kaam nahi diya.
That's only temporary solution this doesn't fix it permanently .
Until u change the chip it will not work .
This method I'll work even without dissembling the laptop just switch on the laptop and cover it with wollen blanket wait until system gets shutdown due to over heat
Then remove the blanket now the laptop starts to run😂😂😂😂😂😂
The hot gun blow method is all the same it will work only for few months
Why it only work for few months
Don't buy Dell
Fr lmaooo