Hell Yeah just run up on ur channel. Going to my grandson bday party right now but I’ll be watching and throwing u some comments to support channel. Sub up to after taking peak all Sammy video’s I got 88-1/2. Love it except power. Have toy carb swap it helps but just low n power not wore out just way 1.3 are u know. Lol. Good work man. Stay safe from ur ole hillbilly buddy.
Hi from Chile, great job! What maximum speed with those wheels and the 1.6 engine? I have a samurai with wheels 35 x12.5 RT15 Trail gear tires 15 x 9 beadblocks I am thinking of installing a 1.6 vitara engine
If you are looking for top speed, it is not worth it, but if you are going offroad, standing your car up and leaning it over. It has been the best upgrade because of the fuel injection. My old 1.3 with a carb would always cut out with any offroading. This motor has great low-end toque as you can see in the video, that was a 4 wheel drive burn out in high range 1 gear. The motor will have power through the first 3 gear and 4 will keep you at 65 with a headwind, and with no wind mine will do 70 just using 5 gear, but on up hills if you want to maintain speed you still half to use 4 gear. Hope this helps you if you have anymore questions feel free to ask.
Corey I’m currently stuck on the wiring harness for this same swap in my samurai, do you have any tips for getting the harness hooked up and the car started?
My fuel injectors won’t open up even though my fuel pump is connected to my ignition and the ignition turns the car over. I don’t know if it’s a ecm communication issue or a bad ecm or something. Also whenever I touch my alternator wire to the positive battery terminal there is a large spark
The motor came with only the wires need to run the motor and then you half to blend your samurai harness with the new one it took about 3 days with a couple of us working on it
I do not know but the fuel injection was the main reason for upgrading instead of rebuilding the old motor. I've read that no matter what you do to the 1.3s they still don't compare to 1.6 16v
Would love a full build walk around for the engine swap. Thanks for the vid!
That motor is crazy!😮😮😶that build is legend! Need friends like you have😄sick sami RESPECT🤜🤛
Nice jimny👍👍👍
Hell Yeah just run up on ur channel. Going to my grandson bday party right now but I’ll be watching and throwing u some comments to support channel. Sub up to after taking peak all Sammy video’s I got 88-1/2. Love it except power. Have toy carb swap it helps but just low n power not wore out just way 1.3 are u know. Lol. Good work man. Stay safe from ur ole hillbilly buddy.
Great video. Could i have a walk around for the wiring. I would like to know what i can get rid of
What parts of the wiring exactly like the part under the dash or more of the engine bay?
Hi from Chile, great job!
What maximum speed with those wheels and the 1.6 engine?
I have a samurai with wheels 35 x12.5 RT15
Trail gear tires 15 x 9 beadblocks
I am thinking of installing a 1.6 vitara engine
With my gearing in the car it has a top speed of 88 down hill
nice samurai!!
Does it worth it? I am about to swap a 1.6 16v in my samurai. Is it still slow?
If you are looking for top speed, it is not worth it, but if you are going offroad, standing your car up and leaning it over. It has been the best upgrade because of the fuel injection. My old 1.3 with a carb would always cut out with any offroading. This motor has great low-end toque as you can see in the video, that was a 4 wheel drive burn out in high range 1 gear. The motor will have power through the first 3 gear and 4 will keep you at 65 with a headwind, and with no wind mine will do 70 just using 5 gear, but on up hills if you want to maintain speed you still half to use 4 gear. Hope this helps you if you have anymore questions feel free to ask.
It makes a big difference i have done the 1.6l 8valve which is a little bit better but the 16valve is a big difference and get the 4.1 transfercase
What mounts did you use?
Corey I’m currently stuck on the wiring harness for this same swap in my samurai, do you have any tips for getting the harness hooked up and the car started?
What are you mainly confused about
My fuel injectors won’t open up even though my fuel pump is connected to my ignition and the ignition turns the car over. I don’t know if it’s a ecm communication issue or a bad ecm or something. Also whenever I touch my alternator wire to the positive battery terminal there is a large spark
what rad hoses and heater block to fire wall for the heater block hoses did you use ?
They are the stock front radator hoses and I did not hook up my heater we cut it out of the cooling system.
@@corey_mcgee4114 thanks
Which computer are you using? Did it bolt on to stock transmission?
Stock transmission and stock computer for the 1.6
What differential and transfer case gearing are you using to get up to 80 mph
Differential stock transfer case 6.5 to 1 33 in tires
Who did your wire harness, I have engine installed just need help on wire harness
The motor came with only the wires need to run the motor and then you half to blend your samurai harness with the new one it took about 3 days with a couple of us working on it
hi how you attached yhe new engine to the samurai gearbox what we need to do?
Different companies make an adaptor kit it is very simple with the kits
Toyota Twin cam 16 v?
is better then a Suzuki 1.3 twin cam swap?
I do not know but the fuel injection was the main reason for upgrading instead of rebuilding the old motor. I've read that no matter what you do to the 1.3s they still don't compare to 1.6 16v
How dos you do the harness?
I just put a bar on the back and attached the harness to the oem spots on the floor
What kit was this
A fully rebuilt motor from lightning conversions
Which fuel pump did you use?
I can't remember I belive it need to be at least 80 or 90 psi
It was a ford full pump
@@corey_mcgee4114 Thanks. You have a link to one you recommend? I have the 1.6 16v 1996 suzuki geo tracker engine.
I’m looking to do the same please help
What do you need help with?
what did you need to do the swap? parts like engine mounts and accessories? im debating between the 1.6 or a diesl.