I have the Chicago Electric 10 inch sliding miter saw. I like mine. I’ve used it rather hard the last few months. I partially re floored my attic, ripped out and installed new deck boards and steps, renovated my stepson’s room, including new flooring, installed new molding in another room, etc. I have it paired with 2 Bauer blades, a 50 tooth for general cutting and I switch out to the 80 tooth for the finish work. If I had to improve upon it, I’d like a taller fence, a double bevel would be nice as would a laser or a shadow guide. With all those upgrades, it would basically be the Bauer model that they sell. But for me, a weekend warrior, at 100 bucks, it’s a solid saw. If it ever craps out I’ll probably “upgrade” to the Bauer but I’m happy with the Chicago Electric, especially for around $100. No real complaints here.
@@donnie017 Thanks for the info... I used the crap out of the angle grinder when I was doing metal work and for only 10 bucks I was extremely happy with it
If you're looking at a cheap welder there, see if the Titanium is dc. The cheaper one is ac and doesn't weld as well as dc. It will work, but a lot of people on you tube convert them over to dc. Check reviews on both.
Gonna grab the remaining icon ratchets I need and hopefully the split beam torque wrench. Also gonna grab a couple of the Braun LED light fixtures for my garage but those are just a normal deal and not the parking lot sale. Will also likely grab some of the gloves and shop towels too
I saw this leaked about a month ago, I’ve been making my plans.🤣🤣 I’m 100% going for the Pittsburgh low profile jack, creeper, pry bars and some other odds and ends. I’m debating on the McGraw 8 gallon compressor, I have the 3 gallon but it just doesn’t cut it. I don’t have a huge need for compressed air but I could maybe dabble a little more if I had a larger compressor. I was going back and forth between the 8 and the 20 gallon on sale next month. Idk, I probably shouldn’t get either.😂😂
@@AllThingsCool I’ve ran DeWalt and Milwaukee for years and usually avoid HF tools unless it’s a one time use. I’ve bought a ton of the Hercules 20v in the last view months and all I can say is WOW. I highly recommend them. Aside from the price I dig a no questions asked warranty. Cheers.
Dangit, I just bought that exact same 30" pedestal fan last week for $120 (ad said $40 off, regularly $160). Ugh. 😁 I've spent about $900 in there this month alone lol. Coupons on most everything except for a couple items. The 15/20/25% off Icon coupon was pretty good--I used it 2X, 3 items first time, 4 items the second time.
I haven't heard people talking of that being a sell out item but you never know. if you regularly shop at Harbor Freight I would do the membership. you will get deals more often and have early access to the Liquidation stuff and sometimes they have some really good deals 👍
I bought one of the YUKON ROLLER BOXES AND I have not had any problems with it and I use it everyday . I bought it 5 years ago and I would recommend it to anyone who is looking for one that is good quality.
I bought a 160$ tool , found out you had to buy 60$ worth of bits to use it . I returned it unused the next day . They only returned 130$ . I was not advised about a restocking fee . No corporate customer service . Dont buy from them . The attorney generals office of our state agreed with me . But had no authority to force a full return . No thanks
Your experience has had no effect on me whatsoever as they typically list their tools as "tool only"... additionally, I've had no issue with returns at HF. I will continue to shop there.
@jkmarshall3553 when they charge a restock fee it's because of shady customers buy an item return in a couple days under there no hastel return policy they use it for what the needed and returned item,not every item has a restocking fee,I have bought a lot of returned items and have worked great
Always wait for the sales!
IMO, I will always grab those nitrile gloves and the shop towel rolls when they are on sale.
Good stuff, Chuck!
@@paulmysliborski4832 lol same here can't have enough! Thanks!
I remember when they were giving those away for free.
@@buckeye9252 yup those were the good Ole days
I have the Chicago Electric 10 inch sliding miter saw. I like mine. I’ve used it rather hard the last few months. I partially re floored my attic, ripped out and installed new deck boards and steps, renovated my stepson’s room, including new flooring, installed new molding in another room, etc. I have it paired with 2 Bauer blades, a 50 tooth for general cutting and I switch out to the 80 tooth for the finish work. If I had to improve upon it, I’d like a taller fence, a double bevel would be nice as would a laser or a shadow guide. With all those upgrades, it would basically be the Bauer model that they sell. But for me, a weekend warrior, at 100 bucks, it’s a solid saw. If it ever craps out I’ll probably “upgrade” to the Bauer but I’m happy with the Chicago Electric, especially for around $100. No real complaints here.
@@donnie017 Thanks for the info... I used the crap out of the angle grinder when I was doing metal work and for only 10 bucks I was extremely happy with it
Hell yaa thx man!!
Was gonna pick up a roll cart before I start this new job but it can wait another week !!
👍
If you're looking at a cheap welder there, see if the Titanium is dc. The cheaper one is ac and doesn't weld as well as dc. It will work, but a lot of people on you tube convert them over to dc. Check reviews on both.
That tool cart on the first page the upper left-hand corner that’s a good price for $200. I will definitely pick that up.
Gonna grab the remaining icon ratchets I need and hopefully the split beam torque wrench. Also gonna grab a couple of the Braun LED light fixtures for my garage but those are just a normal deal and not the parking lot sale. Will also likely grab some of the gloves and shop towels too
just grabbed couple icon ratchets, shop towels, gloves and some other stuff will be posting a video of it soon
I saw this leaked about a month ago, I’ve been making my plans.🤣🤣 I’m 100% going for the Pittsburgh low profile jack, creeper, pry bars and some other odds and ends. I’m debating on the McGraw 8 gallon compressor, I have the 3 gallon but it just doesn’t cut it. I don’t have a huge need for compressed air but I could maybe dabble a little more if I had a larger compressor. I was going back and forth between the 8 and the 20 gallon on sale next month. Idk, I probably shouldn’t get either.😂😂
@@donnie017 lol I'm doing the the same thing
I wish the 6 ton jack stands would go back on sale, couldn't pick them up couple weeks ago
I picked two up yesterday for $49.99. I believe today is the last day
Always the same stuff just different month!
@Blkchevelle better prices on some stuff though so I'm happy to see that finally
I'm eye'ing the drill press for $75
So can I buy the cart today and get the difference back when the sale starts?
That Hercules is a good deal
I need to pick some Hercules tools up haven't tried them but really tempted
@@AllThingsCool I’ve ran DeWalt and Milwaukee for years and usually avoid HF tools unless it’s a one time use. I’ve bought a ton of the Hercules 20v in the last view months and all I can say is WOW. I highly recommend them. Aside from the price I dig a no questions asked warranty. Cheers.
The 40% off icon ratchet is what I’m most excited for I going to snag up just about every model I can.
I hope it's not limited to 1. It could be. I would like a few different ones myself. Been wanting to try their comfort grip models.
Dangit, I just bought that exact same 30" pedestal fan last week for $120 (ad said $40 off, regularly $160). Ugh. 😁 I've spent about $900 in there this month alone lol. Coupons on most everything except for a couple items. The 15/20/25% off Icon coupon was pretty good--I used it 2X, 3 items first time, 4 items the second time.
take it back wait for the sale
Ratchets and the Icon set. Already have one for guns. I want another for the garage. Also the closeout items.
@@ChiefLilly71 Same here but won't make it early for the closeout stuff unfortunately. Good luck!
Cant wait
@@historyguy4351 I agree 👍
do you think it’s necessary to join Inside club to buy the 30” tool cart? or I can wait till the price is available to the public?
I haven't heard people talking of that being a sell out item but you never know. if you regularly shop at Harbor Freight I would do the membership. you will get deals more often and have early access to the Liquidation stuff and sometimes they have some really good deals 👍
@@AllThingsCool only the tool cart and jack stands are on my shortlist. Maybe I’ll find some more items before the parking lot sale next month.
Hey ,I look on line and I can see the same ad . So why do you need to tell me what I can see? I must be missing something
@robertsmith3518 you must not be subscribed I put the video out way before they put the ad on Harbor freights site. This was a leaked ad
Yukon deal
wonder if the ratchet sale will also include breaker bars.... maybe...
Yukon
@bootloopgaming8642 yea good deal on that
I bought one of the YUKON ROLLER BOXES AND I have not had any problems with it and I use it everyday . I bought it 5 years ago and I would recommend it to anyone who is looking for one that is good quality.
Sales Suck, no Discounts that amount to Shit!
I bought a 160$ tool , found out you had to buy 60$ worth of bits to use it . I returned it unused the next day . They only returned 130$ . I was not advised about a restocking fee . No corporate customer service . Dont buy from them .
The attorney generals office of our state agreed with me . But had no authority to force a full return . No thanks
Your experience has had no effect on me whatsoever as they typically list their tools as "tool only"... additionally, I've had no issue with returns at HF. I will continue to shop there.
@jkmarshall3553 when they charge a restock fee it's because of shady customers buy an item return in a couple days under there no hastel return policy they use it for what the needed and returned item,not every item has a restocking fee,I have bought a lot of returned items and have worked great