DBXLE 2.0 with Vitavon Wideners. An INSANE Vehicle!!
Vložit
- čas přidán 5. 09. 2024
- This is by far my most Dangerous RC, Its FAST, Handles GREAT and weighs a TON!!! LOL just don't get in front of or behind this beast!! Links below for the DBXLE and the Vitavon parts in this video, please use the links to help support Exocaged RC, Thanks!!
Vitavon Wideners
Ebay ebay.us/y1XoHe
All the Vitavon parts for the DBXLE 2.0
Ebay ebay.us/zrGJlS
Losi DBXLE 2.0
Amain bit.ly/3Ez6Eq1 (Red)
Amain bit.ly/3xKqixG (Fox)
Horizon bit.ly/399iuLP (Both Colors)
Amazon amzn.to/3jZv4PI (Red)
Amazon amzn.to/3vBcLG3 (Fox)
Ebay ebay.us/TPexgS (Red)
Ebay ebay.us/7PiJNK (Fox)
Castle XLX2 with 800kv Motor
Amain bit.ly/38WNEFZ
Horizon bit.ly/38Y4xjA
Ebay ebay.us/RNnkvg
PowerHobby Rooster Paddles
Amazon amzn.to/3jXtH4i
CHANNEL MEMBER INFO
If you would like support Exocaged RC Directly, consider being a channel member. Cheap monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. Take a look! / @exocagedrc
Get Upside, I use this every time I fill up and just let it earn and fro till Christmas time and cash out. It works and once you get used to it, it’s an easy habit.
Click this link or use promo code 9H6W8 to get an extra $2.22 bonus the first time you make a purchase. upside.app.lin...
#dbxle #xlx2 #vitavon
That is amazing, I love the rooster tails it throws in the dirt. I would love to see that go across a pond on water.. I have never seen a car jump backwards until today.
I actually saw one of these in the flesh recently, we had a bash session 3 weeks ago. My 1st thought was holly crap on a cracker the thing is humongous. Didn't get to drive it i certainly appreciated it seeing one in the flesh. Huge man!!
Arrma DBXLE 🤦♀️ was yur opening comment 😂 …. That’s what we call over here in U.K. a ‘senior moment’ 🤭
Loved the jump in reverse and the slo-mo roosters 👍👌👍
The next logical step for this car is the new hobbywing max4 combo on 12s!
The price of the max 4 and the motor will be going for right at $800. That's an expensive upgrade.
@@Blueknight1960 I think an expensive upgrade is subjective. I'd say a majority of 1/5 scale owners would say spending over 2k on every vitavon part for the dbxle is an expensive upgrade. Since that's already been done, what is left? Imo it's the newest 12s esc from hobbywing. The adjoining motor for that esc is not the only 12s capable motor that works. The max4 uses 8mm bullet connectors, so take your pick on that. I think the motor they try to sell with it is overpriced when there is a glut of 12s capable castle 800kv motors for a better price and possibly a better fit rpm wise. Plus I think everyone wants to know how it performs. The other 12 esc's are hit and miss and the durability is questionable. A tough performing 300A esc is what alot of people want. HW wouldn't have made it if there wasn't a demand for it.
@@codnamerich You're right, everything is subjective. I have some vitavon parts on my dbxl-e 2.0. I have the castle 2028 1100kv so I'll be sticking with 8s. Plus mine has been down for about 5 weeks now waiting on castle to warranty my xlx2.
@@codnamerich 12S sounds crazy fun but I worry about durability and control...
I think this is the most beautiful rc I have ever seen.
pure joy
When you were doing that slow motion Donut the only thing I could think about was how much dirt was getting sent underneath the body
It’s dusty so most of it came out on its own or with the air hose
You lucky duck, I'm over here in Oregon and everything is still soaking wet
What a dirt dog and what a show of dirt Supremacy awesome awesome bashing Brother
This is definitely my top 5 favorite RCs.
Awesome paddles. 🔥👍✌️
And i definitely agree, best way to widen an rc is longer arms and shafts, hub extenders adds alot of stress to the hubs and axles since the pressire will be further from the fulcrum
I love the dirt rooster tails those tires throw. Awesome!
Very high level of respect for that Rig 👍👍👍 great work on that build brother ✌️✌️✌️
Holy crap that rig is massive!!!!!👍🏻🤘
Hi from Cleveland Ohio that one of my favorite RC CAR that you got my friend
I just picked up a used one and have been working on it. But so far it has been a blast! Great video keep up the great work!
OMG it friggin RIPS!
That can sure bring the kid out in you. 😂 it’s nice brother.
Damn those roosters are sick!!!! That is an incredible rig EXO!!!!👍👍👍
That hit in reverse 😂😂
What a wicked buggy!
Nice Joe!
badass😂 your awesome exooooo😊
Your slowmov jump made me laugh a bit. When you send it over dirt pile and jump was in highest point, CZcams decided to show 20 sec ad. After ad break the Losi was still on air. 😂
Wow. Serious hangtime!!
Yup got the same here 😂
That is so badass
Holy shit this is dream..
Nice Joe!!
The only reason i havent done 24mm extended hub conversion on my reeper to run 1/5 tires. I am working to design longer suspension arms though, thinking of using hobao shafts and steering parts
Very Nice!
Awsome vid man🤯. I'll get mine to that point someday, it's all hot racing and atop right now. Its holding up to the beating I put on it for now😈
Awesome video Joe, Dbxle is a monster, i can only imagine how fum it would be in sand dunes
I think you really need to rename that the DirtDevil 😂👍😎
Try out the Pro-line racing Dumont 3.8 tires
OMG!! That’s what I’m looking to do to my DBXLE, I priced it at $1700 Canadian, plus 12 S system and batteries
12s sounds insane. is that not going to be way overpowered? wondering about control/breakage with 12S
@@harbinger26 thus the Vitavon upgrades. Do you have a DBXLE? The drivetrain is enormous, significantly bulkier that the Kraton 1/5. If the Kraton can handle 12S with stock drive shafts and cups, then the DBXLE with Vitavon upgrades ought to be able to handle at least 16s.
@@Mr.Wednesday. yes I just got the DBXLe2 and a bunch of aluminum upgrades (vitavon, DGI, DGracing and some other stuff like skid plates, etc). I'm new to the hobby though, so I never know stuff like what type of drive train can handle what # of cells, etc.
@@harbinger26 the chassis, chassis braces and front steering/brace plate, and bulkheads all need to be Vitavon, the stock ESC has to be upgraded to at least Max 5 or XLX2 for good hard 8s bashing . The dogbones are all perfect, the drive cups should be able to take 12S and when they eventually go, upgrade to Vitavon drive cups. Lots of $$ to pull all that off. All in about $3000 USD, but then you have an absolute weapon of a car. Start with the chassis and chassis braces and Max 5, then get the 46T spur so you can actually run the pinion of your choice with the Max5 setup.
@@Mr.Wednesday. thanks for this. I replaced chassis braces and front brace with aluminum (Losi) but not the chassis yet. Also did get vitavon rear hubs/carrriers (whatever it's called) and bulkheads (front and rear). Will prob wait to mess up the stock one to make that purchase. Also I'm so new it seems like replacing the chassis might be a bit outside my ability right now. I've heard max5/XLX2 isn't much different than stock from some guys- may also wait to run stock electronics until they bust/burn out. I only have 8s right now so hopefully drive cups are good to go. I also got DGI steel turnbuckles and some skid plates to keep my chassis from getting super effed up landing on baseball diamond/gravel stuff around here. Also the skull skid plates just look dope. I appreciate the input here man.
06:45 HO~~~~ HA HA HA HA HA~~~~
That is a lot of car for sure👍not sure I could handle all that lol
That had to cost a fortune I was looking at vitavon parts for my maxx and they ain’t cheap 👍
Yep
I love this truck... I have the gas version and it's an absolute beast
That things an animal 👍🏽👍🏽👍🏽💨
AS we learned with crawlers, adding wheel extensions puts a horrible strain on the wheel bearings. I cant imagine something THAT big & adding 1 million times the power 😳! (OR am i mistaken? 🤷)
You are correct, I’d much rather have longer arms but to fit different tires these wideners are actually quite common on this vehicle.
trade offs faster wear tear more breakages for more fun , my arrma builds you really see im suprised with crawlers though. With arrma reason typhon most reliable narrower less rotational mass with similar components to all others than mojave even though exo strips his all time . Also the slop in-between all moving parts happens faster bigger wheels and extenders . Losis are the best rtr will all this said tight tolerances bullet proof diffs but pay with breaking if you crash .
I think I seen this one on a speed run on innovation RC channel I think the guy ran 14s
WHERES the Phoenix been
On the shelf. I almost needed it for a winch video but the winch didn’t fit right.
Insane power considering the weight!!
What batteries are you using Joe?
Joe,
how much worse do the 1/5 scale and X Maxx trucks tear up the track do you have to do way more maintenance on it than with the 1/8 scale trucks?
Awesome man 👍 what lipos are you using? Thanks
fast lane machining makes an extended a-arm kit.
🙌🏁👍
You could name it "Rooster" and no one would ask a single question why.
I got the dbxl when I start it, it comes on but want move when I hit the gas it resets every time what do I do
Are you running the recommended packs, and what kind of run time are you getting? I am thinking about getting one
Longer arms would require longer axle shafts, longer uppers and steering tie rods.
Yep sure would.
What's up Joe! Hey just wondering what weight shock oil you thinks in that monster?
How much dose it weight now ?
yeh its a damn beast lol
You said Aarma dbxl-e?
Idk did I say that? Hmmm
does the wheel extenders add stress on the arm?
is it possible to build DBXLE from spare parts and aftermarket parts?
I’m sure you can.
Center diff info?
You can't see the car when it's driving away from you so are you just guessing at the dust cloud 😂😂😂😂😂😂
🛩️🛫👍😁1
Right in the middle of the slo mo send an ad with a fat lady in her underwear cut in and traumatized me ! Still a cool video !
We have the same car on our channel thanks to your video we want to try those tires thats amazing friend I love the sand flying up like its nothing to the car to fly through it. Subscribe to us and check us out buddy and like always happy bashing!!!
Love my DBXLe, had it a while now.
Apparently that part has an issue .
I saw in this vid. Good vid as always 👍🏼
czcams.com/video/5TnfXMOoJLU/video.html
Fastlane make some extended arms for dbxle part number: FLM35200
I may have to get those. Not a fan of aluminum arms but it could be better than all these extenders.
Will the arms from rovan fit l know that the rovan xlt arms are longer but don't know if you can get em in plastic aluminum ones are out there
I had dgi wheel spacers on mine but I didn’t trust them with the plastic hubs. Check your Instagram inbox when you get a chance.