Hello. Enjoyed your video very much. Regarding the mounting plate issue, please see my experience following: I initially set up the DJI RS 3 Pro using their directions on attaching the BMCC 6K Pro camera to the upper quick release plate. With the BMCC 6K Pro this meant attaching the upper quick release plate via one bolt to the bottom of the BMCC 6K Pro. After doing this I noticed that even after a short use with the RS 3, the bolt came loose on the camera - not a good sign. I next mounted the BMCC 6K Pro in the Tilta cage. The cage secures to the camera via three bolts - two at the bottom and one at the top. Then, I secured the cage to the upper quick release plate using three bolts (which were not all available in the initial set up with just the camera). Now when I use the RS 3 with the 6K Pro the camera is much more secure. No loose bolts after use. Essentially, this change enables going from a one bolt configuration to a five bolt configuration. Especially for a camera this heavy, this makes a big difference. The cage is obviously the way to go with this configuration.
This is quite possibly the best gimbal I've seen to date for smaller Blackmagic cameras. The whole focus selection system on the gimbal monitor is amazing. As for the mounting bracket issue, I'm 99% sure SmallRig will have a replacement plate for this shortly. IF I were in a situation where I needed a new gimbal, I think this would be my number one choice currently.
@@ODHunte I got the Smallrig "starter kit cage" (without the wooden design), it is even usable with the battery grip, and both the battery grip and cage alone have enough double holes to use
I would really like to see a full review of the lidar autofucus system and how it looks in first person to use and also how it handles passing objects, obstructions and multiple subjects. Thanks
Looks like this is finally a workable gimbal for the BMPCC 6K pro - balancing that awkward camera size on other gimbals has been rough in the past… the larger arm seems to be better suited for it.
For me the biggest con might be the way the Lidar inhales battery, which I'll solve with a belt mounted V-mount connected to the type C port on the handle. I'm definitely getting the Lidar and making ample use of it with my voigtlander lenses on the GH6.
@@initialfocus All the other reviews I've seen indicate that the lidar consumes a hefty amount of juice right now, and that it should be fixed in firmware according to DJI. On the DJI website they list the lidar power consumption at 6.8 W (though potato jet said it was sucking something more like 11 W with his build, I don't know how/where he got that number). The BG30 (battery grip) is listed at a 30.03 Wh capacity MEANING... that even just powering the lidar at the correct 6.8 W (if they fix it and are correct) you can get at best about 4 1/2 hours assuming the motors aren't even on. If Potato Jet was right and its sucking down 11W that means the lidar alone (currently) eats the battery in under 3 hours. Edit: The battery durations I mention are entirely on the assumption that the lidar is the only thing using power. I have no idea with all the variables on balance, weight, motion involved, etc. how much the gimbal motors and focus motor may consume. That said I feel like the math on lidar power consumption tells me we're going to need multiple grips for a full day of shooting, or an external solution to charge the grip while in use, even after they fix the power draw (if you use the lidar).
Belt-mounted vmount is the only way to go. I just use my bmpcc internal battery when I use my gimbal and can easily shoot all day. Gotta keep the weight as low as possible.
I got the notification today!! I purchased my RS 3 Pro with Lidar!! i finally saved up for my first DJI RS 2 Pro, and then five days later the new one was released. lol DJI has been amazing with support in getting my RS 2 Pro back. A lot of praying!! lol
MICHAEL!!!! This is so good! Sick edit man. I laughed so much, especially seeing my waddle of a run with my camera in my hands!😅 It was a blast working with you. Michelle looked beautiful in her clips btw! 🥰
100% I’m so happy I got to test it on a real full wedding for 10+ hours because while yes battery life was something to think about and deal with, it’s compact enough not to be annoyingly in the way but strong enough to support crazy camera packages
I shoot with the c70, rs2 - 3 pro is pre-ordered. I have the extended slide plate for it which allows for 2 1/4 20 attach points at the sacrifice of not being able to quickly slide the unit off without adjustments. Absolutely worth it, camera feels very secure and gave me the confidence I needed to let the camera earn it’s pay check :)
My main question here is that, did this lidar autofocus gimbal just make cameras with terrible autofocus like the GH6 viable in place of sony who are pretty much the the kings of autofocus...? My main reason for picking up the A7S3 was because as a "one man band" you need the autofocus, otherwise I would have went for the micro four thirds Panasonic Lumix GH6. This really has me reconsidering some purchases at the moment...
Wow, when Cliff slammed his RF 70-200mm f/2.8 IS USM $2800 lens on the gimbal while talking about audio I think my jaw dropped about a foot. My lenses are my camera babies, and live in their luxury travel containers until such a time as they are needed.
@@CliffKajun in some ways that is good. I've always been resistant to the idea of the concept that the shot is what matters when I'm working on some lower budget projects. This no doubt has limited my creative flexibility a bit, but I won't risk a lens on a project who's budget can't afford it.
@@billyoung9538 Definitely wise to not risk your gear when it isn't needed/ covered. I insure or buy used when I can so I don't have to feel as bad when I damage it - which is inevitable 😅
THX for review! What do you think about these: - Gudson Moza Air 2S - ZHIYUN WEEBILL 3 - DJI RS3 (Pro) What would be currently the best option to about 700-800 € for filming indoor and outdoor dance events, dance couples in daylight ? Camera and lens can be purchased flexibly - possibly Blackmagic Pocket 4k ?
my Blackmagic 6K Pro works perfectly fine on my Ronin S 🤝🏿 balanced and all the main goal was avoiding getting a new gimbal I almost bought the RS3 til I found an alternative answer which allowed me to finally use my Ronin S w my Blackmagic and tbh it performs the exact same as the other Ronin gimbals
Hello Michael, thank you for a very well-made and informative video! Regarding your issue with the twisting of the Arca mounting plate, please get yourself a Tilta TGA-ERP Arca plate which should solve your problem with wiggling of the 6K Pro when using the grip. Cheers!
Does the LIDAR system connect to the camera itself? If you use the autofocus system, can you still record to an external SSD on the camera? Also can you mount the 6k Pro with a cage?
just the man i was looking for, now why i cant find more of this on youtube? please do that tutorial. question can this focus system work on any camera, I dont want to waste any money at the moment to buy a new camera body. im using the 5dkm2 will that work with this camera with the DJI RSC 2 gimbal? or would you advise me to use this gimbal instead. im looking to get one of the best gimbal for when I upgrade camera bodies. appreciate you man thanks.
Can you please advise on what your friend use to attach the rod without having the cage? I would really love to have that item so that I don’t have to use the cage. Thx so much in advance. And it would be great if he is going to do his rig setup tutorial :)
Michael, is active track now only available with the Lidar system? And lidar is the only way to give cine lenses "autofocus" correct? not the raveneye?
Looks super cool, but man is that active track jittery. At 8:32 even in slowmo you can see the micro movements. It would be nice if there could be some easing in and out of those motions
Nice video! As a lot of people, on my 6kPRO i use an external drive Samsung attached on USB-C. Can the Lidar Autofocus bypass the Usb camera and operate as standalone way? Can RS3 PRO host a medium rig that have a v-mount battery too? Thank a lot ! 🤗
Finally all the people complaining about this film camera not being a vlogging camera because it's not it's a Cinema Camera will be happy now lol and I still can't wait to buy a Blackmagic "soon it will be mine oh yes it will be mine" Wayne Camble
Awesome review! Can you post test footage of auto-focus shots with the 6Kpro? This is the main reason I want to get this gimbal to use on my pocket cameras.
Oh, in the supersmooth section I see the most disappointing thing of this gimbal. And it is SHAKE. I've spent almost 3 grand kitting out the RS2 and while I really like the size, features, the ring, weight etc - i really hate the stabilisation quality on heavier setups. While it states that it can handle 4500g - well it does not, unless those heavy shakes and post stabilisation are ok to you. I was hoping that RS3 Pro would address this issue and let anything from 3 to 5kg work well, but it does not. In fact, you can see those shakes even on lighter setups - they are less pronounced but still there. DJI forum is full of those complaints. I wish they have somewhat made a replacement of the R1 and it's capacity with the RS3 pro, but clearly they did not.
awesome video! Ive got a RED Komodo currently balanced on an RS3 with Raven eye and a sdi to hdmi converter and I have a Lidar autofocus on pre order. Can I just ask does the Lidar remove the need for the Raven Eye completely? I only ask as as cool as the Raveneye is its a real pain to use with the RED Komodo.
Hey Michael! Does your rs3 pro feel “loose” with everything tighten down? Rigged out with bmpcc6k pro and everything locked down, I still feel movement. Despite trying to match several different bmpcc load outs (from you/other videographers) on the rs3 pro, it never fully balances and is always top heavy. Although, it balances fine with just camera and lens. I still run into the issue where the rs3 pro freaks out randomly and causes camera to fall/crash into itself. Any suggestions:)?
Bought that Tilta plate. Sadly doesn’t work with the follow focus attachment on the RS3 Pro. The locking pins are too far apart for the new focus part :( I was very sad
great video, advice is the rode wireless mic 2's they are incredible to work with in run and gun situations, ive dumped the other kind of mics for good , so much happier and they pick up all the noises i wanted camera mounted standard ones couldnt , one thing im still worried about is the balancing, ive had the rs2 with the bmcc 6kpro and i returned it back to amazon after a few days it wouldnt balance it, also if im using a v mount do you just attach it to one of the nato rails?? on the side
Dude, love your channel. Great job, really! But your voice is quiet and music on background in b-roll parts really loud. So I need level up or down sound level an my ipad through all video. Hope you will fix this in your next videos 😉
Hey! Thanks a lot for this video. You covered a lot of sweet details. Question if that’s cool, what’s the battery bank/mount you connected to charge it up? Thanks again.
Zhiyun Transmount battery pack. Got it with my crane 3s years ago. It’s become my top 5 most versatile pieces of kit. Doing a gimbal tour of this setup and I’ll talk more in depth.
Great video. Looking at your catalogue, you have a new subscriber. What's the advantage of using the BM6KPro's battery grip as opposed to a cable fed to an external battery pack? Is it just too clumsy for the gimbal & in the way?
Thanks 🙌🏼 just one less cable to deal with. But on long shoots I actually use both. So the battery grip with 3 batteries will give me like 2.5-3hrs then connect to my mini V-mount and I’ll get another 3ish hours
Great video. I don't understand why the auto focus it part of the gimbal. Can it be used without the gimbal? What if you want auto focus on a shoulder mount rig or on a tripod? How do you compare this LIDAR to the in-camera focus in the Sony A7siii? (I like the Black Magic Pocket 6K but I really need auto focus to augment my aging eyes. :) Thanks for an interesting channel. Now I'm *SUBSCRIBED!*
The LiDAR system can operate separately to the RS3 pro… However you need to 1st calibrate your lens with the RS3 pro… As for using auto focus your Sony camera, you can’t focus in the dark like you can with LiDAR
@@ODHunte Thanks for the quick answers. "Focus in the dark..." that's a really good point. That Sony camera is really good in low light but I have no idea if its auto focus will work in low light. Likely not. Thanks for the review.
I also have the battery grip for my 6k pro but I find the slight amount of movement between the body and grip causes vibrations at times with the heavy lenses I use. Have you had any issues with it?
Hmm haven’t had any issues with that on my end. Every once in a while I check to make sure the grip is still tightened to the body but I haven’t had any issues with it being loose or wiggling
I wish. Sadly it only interfaces through the gimbal and not standalone with the focus motor. So as of right now it’s not possible to use without the gimbal.
It's possible says on the DJi website quote from website "Users can also directly connect the LiDAR Range Finder and focus motor to the camera and operate independently from the gimbal, enabling autofocus on manual lenses as well with an external battery. [6]"
This gimbal+cinema cameras setups are stupidly heaby to work with. You're better of with a vest and a ringgrip. After 2 years I sold my 6K Pro. It is not comfortable to work with a gimbal and a camera like that for days. People! Think about it so you won't spend your money and regret it. Try it first if you can.
They are indeed quite heavy. Especially compared to other mirrorless setups. But for me the quality is worth it and I’ve always dealt with the heavier weight.
Hello. Enjoyed your video very much. Regarding the mounting plate issue, please see my experience following: I initially set up the DJI RS 3 Pro using their directions on attaching the BMCC 6K Pro camera to the upper quick release plate. With the BMCC 6K Pro this meant attaching the upper quick release plate via one bolt to the bottom of the BMCC 6K Pro. After doing this I noticed that even after a short use with the RS 3, the bolt came loose on the camera - not a good sign.
I next mounted the BMCC 6K Pro in the Tilta cage. The cage secures to the camera via three bolts - two at the bottom and one at the top. Then, I secured the cage to the upper quick release plate using three bolts (which were not all available in the initial set up with just the camera). Now when I use the RS 3 with the 6K Pro the camera is much more secure. No loose bolts after use. Essentially, this change enables going from a one bolt configuration to a five bolt configuration. Especially for a camera this heavy, this makes a big difference. The cage is obviously the way to go with this configuration.
This is quite possibly the best gimbal I've seen to date for smaller Blackmagic cameras. The whole focus selection system on the gimbal monitor is amazing. As for the mounting bracket issue, I'm 99% sure SmallRig will have a replacement plate for this shortly. IF I were in a situation where I needed a new gimbal, I think this would be my number one choice currently.
I would suggest the Tilta cage for the 6K Pro as it has dual mounting holes
@@ODHunte I got the Smallrig "starter kit cage" (without the wooden design), it is even usable with the battery grip, and both the battery grip and cage alone have enough double holes to use
I would really like to see a full review of the lidar autofucus system and how it looks in first person to use and also how it handles passing objects, obstructions and multiple subjects. Thanks
Looks like this is finally a workable gimbal for the BMPCC 6K pro - balancing that awkward camera size on other gimbals has been rough in the past… the larger arm seems to be better suited for it.
What’s the point of getting a gimbal for a camera like this. Just rig it up
For people who want smooth footage for a camera like this….lol
@@initialfocus matteo bertoli has never used a gimbal with his 6K
For me the biggest con might be the way the Lidar inhales battery, which I'll solve with a belt mounted V-mount connected to the type C port on the handle. I'm definitely getting the Lidar and making ample use of it with my voigtlander lenses on the GH6.
Hmmm why did I not think that my battery problem wasn’t from the max weight but from using the LiDAR constantly 😳
@@initialfocus All the other reviews I've seen indicate that the lidar consumes a hefty amount of juice right now, and that it should be fixed in firmware according to DJI. On the DJI website they list the lidar power consumption at 6.8 W (though potato jet said it was sucking something more like 11 W with his build, I don't know how/where he got that number). The BG30 (battery grip) is listed at a 30.03 Wh capacity MEANING... that even just powering the lidar at the correct 6.8 W (if they fix it and are correct) you can get at best about 4 1/2 hours assuming the motors aren't even on. If Potato Jet was right and its sucking down 11W that means the lidar alone (currently) eats the battery in under 3 hours.
Edit: The battery durations I mention are entirely on the assumption that the lidar is the only thing using power. I have no idea with all the variables on balance, weight, motion involved, etc. how much the gimbal motors and focus motor may consume. That said I feel like the math on lidar power consumption tells me we're going to need multiple grips for a full day of shooting, or an external solution to charge the grip while in use, even after they fix the power draw (if you use the lidar).
Belt-mounted vmount is the only way to go. I just use my bmpcc internal battery when I use my gimbal and can easily shoot all day. Gotta keep the weight as low as possible.
Thank you for this review. Nothing beats a real world test. That bridal job, was such a valuable lesson. That audio rumble…super important to know. 🙏
I got the notification today!! I purchased my RS 3 Pro with Lidar!! i finally saved up for my first DJI RS 2 Pro, and then five days later the new one was released. lol DJI has been amazing with support in getting my RS 2 Pro back. A lot of praying!! lol
Anamorphic autofocus. Canon FD autofocus. Helios autofocus. All one man band. what a time to be alive.
MICHAEL!!!! This is so good! Sick edit man. I laughed so much, especially seeing my waddle of a run with my camera in my hands!😅 It was a blast working with you. Michelle looked beautiful in her clips btw! 🥰
Thank you so much! It was so fun to collaborate together and can’t wait to do it again. And yes she did haha! Hope we can all meet up more! 🙌🏼
This is a gift to event videographers, well, not a literal gift but a gift they will definitely want to receive!
100% I’m so happy I got to test it on a real full wedding for 10+ hours because while yes battery life was something to think about and deal with, it’s compact enough not to be annoyingly in the way but strong enough to support crazy camera packages
Excellent camera & assesorios Black Magicdesing
Man that intro was insane
Thank you!!
I shoot with the c70, rs2 - 3 pro is pre-ordered. I have the extended slide plate for it which allows for 2 1/4 20 attach points at the sacrifice of not being able to quickly slide the unit off without adjustments. Absolutely worth it, camera feels very secure and gave me the confidence I needed to let the camera earn it’s pay check :)
My main question here is that, did this lidar autofocus gimbal just make cameras with terrible autofocus like the GH6 viable in place of sony who are pretty much the the kings of autofocus...?
My main reason for picking up the A7S3 was because as a "one man band" you need the autofocus, otherwise I would have went for the micro four thirds Panasonic Lumix GH6.
This really has me reconsidering some purchases at the moment...
What happens when you take the camera off the gimbal? Your AF goes bye bye
@@ViralVideos-pr2oi you need the gimbal to make the settings but after that you can use it without it
Yessss!!!! That intro was fire!! 🔥
How heavy does it feel with the BMPCC 6K Pro and battery grip?
My guess is 13lbs
Wow, when Cliff slammed his RF 70-200mm f/2.8 IS USM $2800 lens on the gimbal while talking about audio I think my jaw dropped about a foot. My lenses are my camera babies, and live in their luxury travel containers until such a time as they are needed.
I have a terrible habit of using camera gear like power tools 😅
@@CliffKajun in some ways that is good. I've always been resistant to the idea of the concept that the shot is what matters when I'm working on some lower budget projects. This no doubt has limited my creative flexibility a bit, but I won't risk a lens on a project who's budget can't afford it.
@@billyoung9538 Definitely wise to not risk your gear when it isn't needed/ covered. I insure or buy used when I can so I don't have to feel as bad when I damage it - which is inevitable 😅
I yelled at him, too, don't worry! 😅
Walking out so hilarious! 🤣🤣🤣
THX for review!
What do you think about these:
- Gudson Moza Air 2S
- ZHIYUN WEEBILL 3
- DJI RS3 (Pro)
What would be currently the best option to about 700-800 € for filming indoor and outdoor dance events, dance couples in daylight ?
Camera and lens can be purchased flexibly - possibly Blackmagic Pocket 4k ?
Thank you for the insights. Sophisticated but highly functional is my first impression on this gimbal.
Wish I can also use it to improve my focus in life! But kidding aside, wow! Gimbals have come a long way, gotta credit that to these DJI Ronins!
So funny hhaha
no jk
my Blackmagic 6K Pro works perfectly fine on my Ronin S 🤝🏿 balanced and all the main goal was avoiding getting a new gimbal I almost bought the RS3 til I found an alternative answer which allowed me to finally use my Ronin S w my Blackmagic and tbh it performs the exact same as the other Ronin gimbals
AWESOME video Michael!
Auto Focus BLASPHEMY!!!!!! 😤😤😤
Hello Michael, thank you for a very well-made and informative video! Regarding your issue with the twisting of the Arca mounting plate, please get yourself a Tilta TGA-ERP Arca plate which should solve your problem with wiggling of the 6K Pro when using the grip. Cheers!
Does the LIDAR system connect to the camera itself?
If you use the autofocus system, can you still record to an external SSD on the camera?
Also can you mount the 6k Pro with a cage?
Love your videos and tutorials
eating cold spaghetti... but this video was fire. you've convinced me of this one, over the Zhiyun.
just the man i was looking for, now why i cant find more of this on youtube? please do that tutorial. question can this focus system work on any camera, I dont want to waste any money at the moment to buy a new camera body. im using the 5dkm2 will that work with this camera with the DJI RSC 2 gimbal? or would you advise me to use this gimbal instead. im looking to get one of the best gimbal for when I upgrade camera bodies. appreciate you man thanks.
Love the editing
Wow what Lens was the earlier footage shot on - looks primo :))
Can you please advise on what your friend use to attach the rod without having the cage? I would really love to have that item so that I don’t have to use the cage. Thx so much in advance. And it would be great if he is going to do his rig setup tutorial :)
Please compare this to the Zhijun Crane 3s pro!!!
Crane 3s is workhorse. I balanced my Bmpcc 6k pro with vmount battery and other accessories
Michael, is active track now only available with the Lidar system? And lidar is the only way to give cine lenses "autofocus" correct? not the raveneye?
Looks super cool, but man is that active track jittery. At 8:32 even in slowmo you can see the micro movements. It would be nice if there could be some easing in and out of those motions
Nice video!
As a lot of people, on my 6kPRO i use an external drive Samsung attached on USB-C. Can the Lidar Autofocus bypass the Usb camera and operate as standalone way?
Can RS3 PRO host a medium rig that have a v-mount battery too?
Thank a lot ! 🤗
You may have just saved me from getting the Red Komodo.
Finally all the people complaining about this film camera not being a vlogging camera because it's not it's a Cinema Camera will be happy now lol and I still can't wait to buy a Blackmagic "soon it will be mine oh yes it will be mine" Wayne Camble
Can you compare a BMPCC 6Kpro vs A7sIII for a commercial work and a complete rig cost including all nuts and bolts. Thank you
Awesome review! Can you post test footage of auto-focus shots with the 6Kpro? This is the main reason I want to get this gimbal to use on my pocket cameras.
Wow!!!
cool, thanks for the review, take off how to set up a focusing system with lenses
Oh, in the supersmooth section I see the most disappointing thing of this gimbal. And it is SHAKE. I've spent almost 3 grand kitting out the RS2 and while I really like the size, features, the ring, weight etc - i really hate the stabilisation quality on heavier setups. While it states that it can handle 4500g - well it does not, unless those heavy shakes and post stabilisation are ok to you. I was hoping that RS3 Pro would address this issue and let anything from 3 to 5kg work well, but it does not. In fact, you can see those shakes even on lighter setups - they are less pronounced but still there. DJI forum is full of those complaints. I wish they have somewhat made a replacement of the R1 and it's capacity with the RS3 pro, but clearly they did not.
Agreed unfortunately
Is it difficult to balance bmpcc on the RS3
Lot of links in the description, none of them are the lidar autofocus system.
looks like gimbal coupled with gyro data will be a rock solid deal
100% very excited with this aetup
How much does that set up weigh? I have the RS3 with a Canon C200 and it is a ton.
awesome video! Ive got a RED Komodo currently balanced on an RS3 with Raven eye and a sdi to hdmi converter and I have a Lidar autofocus on pre order. Can I just ask does the Lidar remove the need for the Raven Eye completely? I only ask as as cool as the Raveneye is its a real pain to use with the RED Komodo.
Hey Michael! Does your rs3 pro feel “loose” with everything tighten down? Rigged out with bmpcc6k pro and everything locked down, I still feel movement. Despite trying to match several different bmpcc load outs (from you/other videographers) on the rs3 pro, it never fully balances and is always top heavy. Although, it balances fine with just camera and lens. I still run into the issue where the rs3 pro freaks out randomly and causes camera to fall/crash into itself. Any suggestions:)?
Once you get the small rig or Tilta plate it won’t wiggle anymore. I use it now and no more almost insurance claims in vertical mode
Bought that Tilta plate. Sadly doesn’t work with the follow focus attachment on the RS3 Pro. The locking pins are too far apart for the new focus part :( I was very sad
@@initialfocus dang man I’m sorry to hear that. Hopefully small rig/Tilta will update the model
great video, advice is the rode wireless mic 2's they are incredible to work with in run and gun situations, ive dumped the other kind of mics for good , so much happier and they pick up all the noises i wanted camera mounted standard ones couldnt , one thing im still worried about is the balancing, ive had the rs2 with the bmcc 6kpro and i returned it back to amazon after a few days it wouldnt balance it, also if im using a v mount do you just attach it to one of the nato rails?? on the side
Gimbal set up tour next?
Hi Michael, I have sent you a THANOS SE vest, when will you upload a review video for it?
can you use a smartphone with the app in conjunction with the lidar autofocus? and what us the max distance to follow focus?
looks like active tracking needs a good image to track like on their drones
🤯🤯
Dude, love your channel. Great job, really! But your voice is quiet and music on background in b-roll parts really loud. So I need level up or down sound level an my ipad through all video. Hope you will fix this in your next videos 😉
Can it focus via bluetooth rather than the external motor?
Michael, take the mounting plate to a machine shop, have them drill a 1/4" hole and tap it out. $20 bucks, max. Problem solved.
Have you compared the RS2 lidar AF with the RS3 Pro's one on the blackmagic cameras?
Please where can I find this Auto Focus device Where is the link Can I use it with DJI RS2 ?!
Just buy a second BPMCC. They’re not expensive. All your shots don’t have to be on a gimbal
Time for a pixel remap!
Hey! Thanks a lot for this video. You covered a lot of sweet details. Question if that’s cool, what’s the battery bank/mount you connected to charge it up? Thanks again.
Zhiyun Transmount battery pack. Got it with my crane 3s years ago. It’s become my top 5 most versatile pieces of kit. Doing a gimbal tour of this setup and I’ll talk more in depth.
Fantastic! Sweet hack actually. Well done sir, thanks again.
why is the lidar so hard to get to work and update firmware... the lights never turn green plz help
Hi, any idea if BMD Studio Camera 4K Pro can work well with DJI new RS3 Pro ?
Does the Lidar AF and focus motor comes with the DJI RS3 Pro or do you need to by them seperately?
Great video. Looking at your catalogue, you have a new subscriber.
What's the advantage of using the BM6KPro's battery grip as opposed to a cable fed to an external battery pack? Is it just too clumsy for the gimbal & in the way?
Thanks 🙌🏼 just one less cable to deal with. But on long shoots I actually use both. So the battery grip with 3 batteries will give me like 2.5-3hrs then connect to my mini V-mount and I’ll get another 3ish hours
@@initialfocus Thnx for your response!
HOW DID YOU SET UP THE FOCUS MOTOR PLEASE;MINE ALWAYS MOVE OUT WHEN AM PULLING FOCUS
Follow focus can work with any EF lens?
Suscrito!!, que tal funcionará si se tiene una jaula tilta? no deseo quitarla cada vez que quiera usarla en el Gimbal, que opinas?
Any word when DJI will have lidar sensor for this in stock?
Can you link the backup battery you have
How heavy is this gimble with the camera ?
My biggest question is can it hold the Sony FX9
Is the fx9 a longer body than the RED raptor? I saw someone balance that on it.
@@initialfocus yeah slighter longer but it may work, gotta try it tho
Is there a weight requirement for the rs3 pro can it carry light cameras?
Other reviewers have come to the conclusion that the main thing draining the battery is not the weight of what's on it but the lidar system.
hey
can I do that for the 4k version?
Would it easily work with a cage for the bmpcc6k?
Great video. I don't understand why the auto focus it part of the gimbal. Can it be used without the gimbal? What if you want auto focus on a shoulder mount rig or on a tripod? How do you compare this LIDAR to the in-camera focus in the Sony A7siii? (I like the Black Magic Pocket 6K but I really need auto focus to augment my aging eyes. :)
Thanks for an interesting channel. Now I'm *SUBSCRIBED!*
The LiDAR system can operate separately to the RS3 pro… However you need to 1st calibrate your lens with the RS3 pro… As for using auto focus your Sony camera, you can’t focus in the dark like you can with LiDAR
@@ODHunte Thanks for the quick answers. "Focus in the dark..." that's a really good point. That Sony camera is really good in low light but I have no idea if its auto focus will work in low light. Likely not. Thanks for the review.
great video , but your skin tones are blue and yellow , its kinda weird looking effect
Are you underexposed by a stop? Or is it my screen?
I’d love that tutorial lol
Can you try to balance an Ursa Mini Pro onto it? lol
Word
I also have the battery grip for my 6k pro but I find the slight amount of movement between the body and grip causes vibrations at times with the heavy lenses I use. Have you had any issues with it?
Hmm haven’t had any issues with that on my end. Every once in a while I check to make sure the grip is still tightened to the body but I haven’t had any issues with it being loose or wiggling
can the lidar function without the gimbal ? running gun situation autofocus possible ?
I wish. Sadly it only interfaces through the gimbal and not standalone with the focus motor. So as of right now it’s not possible to use without the gimbal.
It's possible says on the DJi website quote from website
"Users can also directly connect the LiDAR Range Finder and focus motor to the camera and operate independently from the gimbal, enabling autofocus on manual lenses as well with an external battery. [6]"
@@initialfocus check dpi web there is a gif picture showing it works alone with the Blackmagic without any HDMI cable connected
Although not the purpose if the video, the colours were just so washed out in the scenes with the bM.
Can you still use the tilta ring ?
I don’t own any accessories from the RS2 but I’ve heard they are all compatible with the RS3
$800 Canadian for the lidar module, jesus christ :( Won't be looking into the dji ecosystem for a looooooooong time.
Did he really just balance a 70-200 lens? 😱😱
Yup 😳
it cost 1300 dollars... one can buy a better camera for this...
I hear your complaint but who actually vlogs with a setup like this? Super ridiculous.
This gimbal+cinema cameras setups are stupidly heaby to work with. You're better of with a vest and a ringgrip. After 2 years I sold my 6K Pro. It is not comfortable to work with a gimbal and a camera like that for days. People! Think about it so you won't spend your money and regret it. Try it first if you can.
They are indeed quite heavy. Especially compared to other mirrorless setups. But for me the quality is worth it and I’ve always dealt with the heavier weight.
Absolutely ridiculous garbage
I like what you're doing, but your exposure is way too dark and your audio levels are all over the place