Emilio Velasquez | Mini Pedalboard Rundown 2024
Vložit
- čas přidán 15. 07. 2024
- Here is my pedalboard rundown! Also... embrace all your mistakes. (I certainly did in this video) 😂
Quick tip: It's okay for your tone to be ever so slightly harsh and a little bright. Remember that guitars always sit in a very specific part of the mix. 👍🏼
INSTAGRAM: / emilio.jvr
0:00 Intro Jam
1:00 Quick Introduction
1:20 Breakdown
2:46 Answering an Important Question
3:09 HX Stomp
5:05 Impulse Response
6:55 Reverbs
#gretschguitars #hxstomp #worship #jhspedals #guitar #pedalboard #rig
This is awesome!! I was just looking at your board on Facebook and I fell in love with your tones!! Keep up the good work loving these videos!!
This means so much man! Thanks a lot. Seriously!
Loving the tone and guitar playing Emilio. Thanks for making this Video
Thanks man!!
Great video Emilio, thanks for openly showing your settings too! keep making more videos!
Thank you so much man!! This means alot
Woah! Great tone and love the functionality of it. Definitely made the most of that board🔥
I think this is my next board too
Great tone, your board inspires me to set up mine!!!
Love this small board and the tones you get out of the HxStomp. It really challenges me and my phosophie on how needed I've felt analog pedals to be for a truly good tone. You got a new follower here ✋🏼
Man..! Thank you so much ❤️
Love the board
Song title: A Little Fire - Victory Worship
Sounds amazing. Super nice playing.
Thanks bro! I made a ton of mistake. But it’s all good 😂
you killed it with this build and this video!
Dude thank you so much!!!
Great pedalboard , great sound !
Great sound
Nice board and great layout. Not overly packed to the point that it’ll be a bit difficult to hit the buttons. Excellent choice of pedals too
Thanks man! Yeah it’s nice and light too. I can’t imagine carrying a big massive board around
Sounds great!
Thank you so much!
Tone is 🔥 Nice work!
My man! I appreciate it
already a fan here
Dude this means so much!!
Perfect 😉
thats a really nice board right there!
Thanks man! The size is perfect and it can do it all
Nice board! I like how you're switching banks. I use to use the particle verb a lot until the dynamic hall came along. But it does take more DSP. Great approach with the delays. Interesting how you put an EQ between the amp and cab.
Thanks man! I really don't use that EQ anymore. But it was nice for a while lol
Hermano! Sick tones bro 😂
Gracias bro!
THIS!
Que som bom cara!
Muito obrigado!!!
Sounds awsome. Are you effects to input or effects loop
Great video, emilio! How do you control ur overall volume if ur ch volume is max and ur master @ 8.2?
thanks for the video! what gretsch model is that?
particle verb is underrated! Used it a lot with my good ole Line 6 M9
Yea man, it’s fantastic
great job with the video and your pedalboard setup! I run a very similar setup with a small board built around the HX Stomp :) On your stereo IR block, do you put a small delay on one of the IR cabs to get more stereo spread or to avoid phasing issues?
I did have a delay at first, but It was drowning me in the mix when I played live. So now I just spread the IRs left and right.
And small Stomp boards are the best haha
I loved dialing in your tones on my HX Stomp. I also have a Morning Glory so it was easy to dial it in. One question: how do you use the compressor? Is it always on or just used in certain situations?
Sweet!! Glad you were able to snag a few ideas. Yeah, I keep it always on.
Need help on mine so far I have helix line 6 floor and H-90 I had the tonex but for some strange reason I sent it back
Great tone and board man.Don’t need a huge spaceship to get good tone💪💪
Hahah that’s right! No need to break out backs for good tone 😂
Love the board! Great tones. I'm running a similar setup. Do you set your input at inst or line level? I have mine at line but I have to max out the channel drive on my stereo amps to get them to edge of breakup.
Oh interesting… I think I run mine at instant? I’ve tried both and can’t really tell the difference.
Are you using a split signal for LR out of the headphone output for recording/ foh?
hey man, i love the playing. I was wondering what mods you did to your Gretsch G5425. I have it myself, and am looking for an upgrade of an already pretty great guitar
It's a great guitar bro! The size is perfect, and playability was great off the bat.
- Replaced the wiring with some old Gibson stuff my guitar tech had laying around.
- Replaced the stock capacitors for .022 to allow more clarity, it also keeps the bass but allows more treble in.
- Replaced the stock pickups for some Blacktop Filtertrons (balanced them and setup the height)
- And of course gave it a good setup. It's fast, bassy and BRIGHT. OH MY it can be bright.
Emilio, did you purchase the clips for the pedals or did you secure them with duo lock? Love your set up!!
@@jonathanalvarado2657 i had a few clips left over and used double sided tape 😂😂
How many presets are you running, what sort of switching have you enabled for the drive pedals or are these purely analog tap dancing to engage ?
I love this sound ! I have a couple questions could we email or something??
Well done! Lots of great tone from such a small board. Do you ever help folks out who are trying to dial in their tones who aren’t as experienced?
Hey man! Would love to help you out! Do you wanna connect?
@rianelliot1 Can you send direct messages through here? Lol
we have the same guitar with the same mods! How do you power the pedalboard?
Do you have sample IR used here mybro? Blessings!
What power supply are you using that will run the HX Stomp?
amazinggg video and souuund bro, and what is the t shirt brand that you are using?
Thanks a lot!! And not sure… 😂 I think I got it as a gift. Maybe Banana Republic?
Muito show
🙏🏼
What are the measurements of the pedalboard?
I have a similar setup with the stomp, morning glory, and kilt but your tones sounds so much better haha. What’s your favorite/go-to reverb in the stomp?
Yeah, those are my favorite pedals ever. It's the sounds I hear in my head.
For dryer tones: Dynamic Room
Worship Tones: Glitz + Particle
@@emiliojvrI see I’ll try those out! I have a problem with sounds getting a bit too muddy at high gain stages
@@chriskim430 Do you run your wet effects post amp? Maybe reduce the decay?
@@emiliojvr I do run my wet effects after but after seeing your settings I def set the mix and decay too high
What do you use for delays?
Hey what cables are you using
Are u running into a DI or are u running trs into xlr?
Wow super nice! I want to try similar setup! Would you share your Stomp preset? Or is it for sale?
Send me your email!!
Hi, thanks for the video. How did you configure two IRs in the same block?
When you go to pick IR, you can select an option that says “Dual”
Do you go direct to FOH?
Are you able to build a sound like the one in Praise by Elvation worship with that pedalboard?
Awesome video btw 🎉
I usually just use a chorus effect for that
Thank you so much!!
How big is the Pedalboard?
Super nice, which guitarists make up your most significant influences?
Man… that’s the hardest question. I love people like SRV, to salsa players, all the way to worship guitar players. Too many to count 😂.
Awesome hahaha
@@emiliojvr
Are you running lambertron pickups or stock on the guitar!? Thanks in advance!
Hey! I upgraded to the Blacktop Filtertrons
I just have this question in my mind whilst watching this video. Those tones, are those what you are using everytime and just kinda tweak the delay, reverb and OD gains depending on the song?
Great question!! I never tweak my wet effects. I might close the “CUT” on the amps just a little if I’m playing a single coil guitar. But it everything else stays the same.
@@emiliojvr Man, that's inspiring. I always want to have a versatile tone by having less gear. Thanks a lot.
@@emiliojvr If you don't mind, I have another question. The Kilt, Rat and Morning Glory, are those your only drives? You're not using another drive from the stomp?
@@kevinsalas2716 Yeah! That's it. What I do I just stack them if I really need to cut through the mix. All of these have a similar clipping, so the complement each other. Also, if I need a fuzz tone I just run my RAT hotter.
@@kevinsalas2716 KEEP THE QUESTIONS COMING! I'm here to help haha
very good! how to limit the use of remote banks?
Hey! What do you mean? How I have my banks setup?
in HX, how are you configured to climb the banks and return to the start?
@@emanuelkleber You have to go to "COMMAND CENTER" and from there you can assign different tasks to the foot switches.
@@emiliojvr Yes! I use the command center to configure snapshots. Thank you very much bro, make more videos
@@emanuelkleber I will try to get one out maybe once a week. Work is pretty crazy, but I hope I can do it lol
So what are your stages of overdrive. Is it Mg stage 1, Kilt Stage 2, and then do you stack them? Thanks!
I go heavy to light gain. Rat > Kilt > MG.
And I boost the Rat and Kilt with the MG
I appreciate the reply
Broo how did you set a range of presets from 1 to 3 in you footswitch 4? That just blow mi mind
Command center, you can do this easily with hxcommands
is there something different about incorporating real pedals into a multifx unit. cause im torn between getting pedals or either getting a stomp. How come you dont use the drives that are built in the stomp. just not your cup of tea? thank you so much!!! great video!
Hey man! I think for me, these pedals have a very specific sound. But the main reason I have analog pedals is how easy it is to change settings + it frees up space on my Stomp so I can use high DSP wet effects.
Wow. Thank you for that! I think the best option is to take some inspiration from your rig! great tone! @@emiliojvr
earned a sub too!
How did you make the switch cycle through 3 banks on the stomp?
If you go to the "Command center" you can set it up there.
is the /13 amp you are using more of a VOX or Fender style?
Hey Kevin! It's both.. VOX and Fender
Ok - super dumb here when it comes to building a board just like this…can you go over the routings for cables..it looks like some are not plugged in??
I have the same question lol! Please show the routing.
@loudlove69 @stanleyrimpsonjr HAHA! So I am using right angle cables that are very thin. They're all connected. I just have it nice and cleaned up 😂
@@emiliojvr ok cool - but can you get some more details on the board and how it is routed around? What cables are you using also?
@@user-cn3lg5rv3x www.templeaudio.com/solo-series < Board
@@user-cn3lg5rv3x www.amazon.com/MAKA-Profile-Stereo-Effects-Right-Angle/dp/B093PFVS1C/ref=sr_1_30?crid=TIUXMU4POKRT&keywords=trs%2Bpatch%2Bcable&qid=1706032898&sprefix=trs%2Bpatch%2B%2Caps%2C96&sr=8-30&th=1 < Patch cables
Do you think the XR irs sound better without any low and high cut?
Hey! It depends on the IRS... I think a the once I picked out sounded more "open" that way. It also made the amp a little more unpredictable, similar to the real thing!
@@emiliojvr ok thanks, and what is for eq in your preset between amp and irs?
Bass next?🦧
I don’t have one bro… 😂
Could you tell me the name of this pedalboard？
Temple Audio Solo 18!
Do you use noise gate?
I do! Just a very light amount before the amp
🧱 ⬆️
For sure
Does anyone know the name/model of each pedal? Please!
I list them during the breakdown section!
Thanks a lot!@@emiliojvr