For the horn.. you can fix it. First try tapping it with a screw driver.. I know sounds funny, but bang it like 5 or 6 times… if it didn’t fix, then turn the adjustment screw behind the horn. Now try horn.
Congrats for the video. I kindly ask you for some specific information about the scooter. What is the actual height (cm) from the footrest to the handlebar handle? What is the width of the handlebar? thank you
Thank you so much. Apologies for the late response. Just uploaded a new vid about issues, maintenance and upgrades. The vid is still processing. I will add links in the description. Thanks for watching.
What was the replacement tire size and where exactly did you get them? those tires are thick and haven't seen them anywhere. I live in East Europe, Poland to be exact so no US links please.
Hey man I got 2k miles on my hawk pro and yes it is a pain in the ass to change a tire or tube, my question is when u remove the silicone pad what all do u have to disconnect inside the deck ? And once u put everything back together does the silicone pad go rite back on nice and tight or do u have to use something to glue it back on? I just want my scooter to stay fresh ya know
Hey. Apologies for the late response. When I remove the deck, I peel the silicone back enough to expose the screws. As for wires, I disconnect the motor cable and controller wires. There is a 6 pin plug attached to the motor cable that must be unpinned because you cannot slide it out the rear with the plug attached. I always take a pick of the plug before unpinning it. So I know exactly where the pins go. The controller wires are pretty much straight forward. But I take a pic before unplugging to be on the safe side. I’ve done this so much that now it’s easy and fast for me.
@@AJCoReTVI actually don't know. I haven't removed the tires yet nor caught a flat yet. I did buy it in Nov of 23 and hope they are tubeless as they were stated to be but I hear otherwise from other owners.
@@AJCoReTVBummer I do know I have the 6 screws on the hub motor. Are you saying there are wheels / hub motors without any screws on the Yume's which make them tubeless?
@@thefpvlife7785 yes they confirmed with me yesterday. Sadly I actually prefer the split rim tubed tire combo. Seems much easier to replace, then the insane work to replace tubeless tires from 1-piece rims 😢
For the horn.. you can fix it. First try tapping it with a screw driver.. I know sounds funny, but bang it like 5 or 6 times… if it didn’t fix, then turn the adjustment screw behind the horn. Now try horn.
At the rate pevs are banned or require license, you may get your license plate setup soon 😂
Congrats for the video. I kindly ask you for some specific information about the scooter. What is the actual height (cm) from the footrest to the handlebar handle? What is the width of the handlebar?
thank you
Drop a link for the sliders, the alarm, upper headlamp, and the side mirrors. You have a sweet setup
Thank you so much. Apologies for the late response. Just uploaded a new vid about issues, maintenance and upgrades. The vid is still processing. I will add links in the description. Thanks for watching.
What was the replacement tire size and where exactly did you get them? those tires are thick and haven't seen them anywhere. I live in East Europe, Poland to be exact so no US links please.
Hey man I got 2k miles on my hawk pro and yes it is a pain in the ass to change a tire or tube, my question is when u remove the silicone pad what all do u have to disconnect inside the deck ? And once u put everything back together does the silicone pad go rite back on nice and tight or do u have to use something to glue it back on? I just want my scooter to stay fresh ya know
Hey. Apologies for the late response. When I remove the deck, I peel the silicone back enough to expose the screws. As for wires, I disconnect the motor cable and controller wires. There is a 6 pin plug attached to the motor cable that must be unpinned because you cannot slide it out the rear with the plug attached. I always take a pick of the plug before unpinning it. So I know exactly where the pins go. The controller wires are pretty much straight forward. But I take a pic before unplugging to be on the safe side. I’ve done this so much that now it’s easy and fast for me.
Replacing the silicone pd is very easy for me. It sticks right back without any issues.
Hey what's going on. I use FlatOut for my tire sealant and no issues thus far.
The newer models come with tubeless tires.. which version did you get?
@@AJCoReTVI actually don't know. I haven't removed the tires yet nor caught a flat yet. I did buy it in Nov of 23 and hope they are tubeless as they were stated to be but I hear otherwise from other owners.
@@thefpvlife7785 check if you have the split rim design. Look for the 6 screws.. if you have them, then tubed… if not, then they are tubeless.
@@AJCoReTVBummer I do know I have the 6 screws on the hub motor. Are you saying there are wheels / hub motors without any screws on the Yume's which make them tubeless?
@@thefpvlife7785 yes they confirmed with me yesterday. Sadly I actually prefer the split rim tubed tire combo. Seems much easier to replace, then the insane work to replace tubeless tires from 1-piece rims 😢
Hello how width is the deck?
Im planning to get one
Hi. Sorry for the late response. The deck is a little over 8inches.
Where did you get those nut covers?
Hi. Sorry for the late response. If you mean Sliders, I got them from amazon.
Can you tell us how you installed the sliders?
It's simple .. you remove the nut, slide it in then re attach the nut.
@@thefpvlife7785 How do I re-tighten the nut with the slider on the way of the wrench?
@@ArnoldCUse a socket & ratchet wrench.
Hi. Sorry for the late response. They’re very easy to install. Simple bolt on.