Hello Mark, it's been a long time since you posted this video but maybe you'll remember where to put the cog spring, I mean in which crater let's call it that, the end of the spring should be. how should the cog with the spring be arranged when we put it all back together so that the spring will not get damaged? my kickstarer doesn't kick back suddenly something jumped inside and I want to make sure that the cog with the spring didn't jump between the craters. this cog for me floats up and I have to manually pull back the kickstarter so that the cog starts to move back and kickstarter work again and so on and on and on sometimes it kicks back on its own, sometimes I have to correct it manually, a dozen or so minutes ago everything worked as it should
oh bud i feel your pain and these are hard once they start to ware then then will keep slipping out and messing around . i've in the past changed the cover with a working one , if the electric start works just use that if not its easier to get it as in my videos . otherwise start over with a new kit
that circlip seems like nothing but it really plays a very important role for kick-start mechanism as it is shown the video, thanks for this very helpful video
hi mate, my kickstart was feeling slack when brought it, took the casing off to have a look and the half moon thing was broken, i have replaced it and replaced the pinion as well as the spring the lot but it’s still slack when kicking down and it doesn’t seem to grip onto anything tia
Hey Mark I changed my kickstarter 3 times but it is still chippin... seems like the the little wheel gets in contact with the theeth on the crank and so the theeth start to break off. I'm desperate tried all variants (12,5mm/13mm/15mm) nothing helped
mustermann008 that’s not good bud and sometimes it’s easier just to buy the whole part 2nd hand working with the cover ! It’s just that the old cover wears and then not fit , there is a clip on the outer part and a washer on the dog cog that should be on there but once it start to grind the teeth they are no good Mark
that's the hard part lol, on my video watch where it should be line it up and put on the crank, use a small bit of wood ( coke can, any thing like that)and put it on it then flip it over so the wood holds it in place on the ground then slip on the clip and kick start . hope that help, please check out my other videos as thy may help and like and subscribe , mark
Hi, mark do you know the kickstart washer that goes onto the variator can it be replaced and if so how? Because i have a working kickstart but where it connects to spin is just sheered.
Hi Mark, I bought a speedfight 2 100cc but the kick start mechanism was missing. I bought a kit on ebay which says it’s for the 100cc model and has all the parts listed in your video, but I think im missing some extra parts, i.e the shaft bushing, the shaft washer that goes on before the surclip and the shim washer that goes on the push out gear. Do you know what the dimensions of the two washers should be, Thanks
100cc parts are very hard to get hold of and e bay sellers say fits both but as you now know they do not , best try on e bay for breakers or people selling parts , this is how i started pmsl ended up with 10 speedfights just for part and kept buying . 500 speedfight later lol , its easier to get a 100cc electric starter
Hi Mark, Just want to ask whats the difference between 100cc and 50cc bendix ? Ive got 100cc speedfight with 50cc bendix in and it wont work. Bendix itself will go in but when I put cover back on and try to start it there is is no answer from starter motor as there is something on its way. Thanks Mark
eNeRGetyk Power hi bud well they are different bud The 100cc has more teeth and a bloody hard to get hold of 50cc and every where and easy to get new and 2nd but 100cc parts are more difficult like the 100 cc bendix They are also a little bigger Maybe look on eBay for a seller breaking one rather than just the bendix and and don’t be fooled by sellers saying it will fit both as the dont Please like share and sub I do have a few videos on 100cc but not many Mark
Hey Mark love your channel, what do you think of Chinese parts, eg using Chinese piston in minarelli engines, rollers and so on, is there much difference, Thanks
Most parts are from the same place Stay away from the pistons with Chinese writing on them But a lot of parts are good it just comes down to your budget and I’ve used both and they both work
Take it off and check it all works ok They really can be funny buggers to sort I'm doing one this weekend so will show you in more detail with my new video if it helps If yours works ok off then yes it can be the washer
oh yes you will and it will be hard to find any 100c parts but 2nd hand bud try fb or ebay for parts or braking as that the only way most say fit either 50 or 100 but i can tell you they dont lol
There’s over 70 speedfight videos bud all worth a watch plus another channel with all of them on a play list I do explain it in one of them but it’s a bit of a bugger lol Just click in then spin round and click in right
@@kuhnattv8312 oh right bud In sure you can see it in my throttle cable video on here ! But it has to follow the guilds down then under to the carb Theres over 80 videos now bud tyre in Speedfight mark savage I show it in my older video too
Hi mate Iv got a speedflight 2 that won’t start it don’t even tick over and when I go to kick start it the kick start don’t move at all like it’s jammed what could it be ?
i have 100 videos on my channel that will help with all your issues , including the kick start and electric start too. also look as carb and the steps to take maybe even E10 fuel as in my videos
Oh, cause a bought mine a few days ago and i was wondering where the side stand was. So if i want i can add a side stand and still mantain the centre stand ?
i just bought a speedfight 2 and the kick start and the mechanism are missing, the guy uses the electric start, is there a video how to rebuild a kick start
hi bud I do have over 70 speedfight videos and this video shows you the basics but don't really have any other videos on how to rebuild, all the parts sre in the videos so should help maybe watch this a few times bud hope that helps try watching a few of my other videos and I have another channel / speedfight mark savage where they are all on a play list please like and sub mark
Yea they do 2 types of dendix They connect to the start cog so try and see the size of your start but 12.5 is normal on sp1 50cc But can't 100% say yours is bud Sorry to say Maybe have a double check on your start and try and see if its smaller or matches the dendix on the picture
@@marksavage okay Mark im gonna check again for that btw i wanted to ask u if my piston is ready for changing when i ride the bike the temp goes up really fast even tho the water pump is working well
If you have check the water and changed it with anti freeze when servicing it should be OK Temp going up is ok in hot weather , it bad if it over heats !! Then yes it would be a good idea to change the piston and gasket set
Don't !! I've done a few videos about that , please do. It do it , it was only for 4t Chinese mopeds and it didn't really work or maybe 4 mph extra , if your do it on your bike it will blow your Cdi and stop the oil pump and go wrong , hope that helps bud thanks for watching please like my videos , mark
They did two types for the 50cc and another for the 100cc The bendix has to match the starter teeth As for the kick that has to match the pinion But the both have to match elec and kick
Newbury Youts hi bud I have a few videos on the ludix but many parts are the same as the speedfight like the kick start basics but maybe time to buy a 2nd hand unit Thanks for watcher Mark
@@marksavage cheers mate I knew about the clip because of your video but for some reason I thought I had to disconnect the spring first I've done it now all sorted and back on correctly I do have a question though..the small cog that comes out to meet the variator has a clip around and on that clip there is a U shaped bit that comes down into casing the one they sent seems at lease 1cm shorter than the one that came off (old one severely bent so can't re use) will this still function the same ?
Be a good plan to clean up the inside of the Casing and use some grease on the mechanism
Would have been nice showing us how you repaired it.. :(
Very nice, sir, thank you very much!
That's good to hear , theres another 70 odd speedfight videos that might help too take care
Hello Mark, it's been a long time since you posted this video but maybe you'll remember where to put the cog spring, I mean in which crater let's call it that, the end of the spring should be. how should the cog with the spring be arranged when we put it all back together so that the spring will not get damaged? my kickstarer doesn't kick back suddenly something jumped inside and I want to make sure that the cog with the spring didn't jump between the craters. this cog for me floats up and I have to manually pull back the kickstarter so that the cog starts to move back and kickstarter work again and so on and on and on sometimes it kicks back on its own, sometimes I have to correct it manually, a dozen or so minutes ago everything worked as it should
oh bud i feel your pain and these are hard once they start to ware then then will keep slipping out and messing around . i've in the past changed the cover with a working one , if the electric start works just use that if not its easier to get it as in my videos . otherwise start over with a new kit
that circlip seems like nothing but it really plays a very important role for kick-start mechanism as it is shown the video, thanks for this very helpful video
it plays a big part bud
hi mate, my kickstart was feeling slack when brought it, took the casing off to have a look and the half moon thing was broken, i have replaced it and replaced the pinion as well as the spring the lot but it’s still slack when kicking down and it doesn’t seem to grip onto anything tia
Thanks men.Your great!👍👌
Thanks for the video love it
Hey Mark I changed my kickstarter 3 times but it is still chippin... seems like the the little wheel gets in contact with the theeth on the crank and so the theeth start to break off. I'm desperate tried all variants (12,5mm/13mm/15mm) nothing helped
mustermann008 that’s not good bud and sometimes it’s easier just to buy the whole part 2nd hand working with the cover !
It’s just that the old cover wears and then not fit , there is a clip on the outer part and a washer on the dog cog that should be on there but once it start to grind the teeth they are no good
Mark
Hi mate, what’s the difference between the lengths? 12.5mm 13.5mm and 15.5mm? As not sure what one to get? That’s for the starter pinion
how do you put it all back together brought all new parts but can't get the spring to stay in
that's the hard part lol, on my video watch where it should be line it up and put on the crank, use a small bit of wood ( coke can, any thing like that)and put it on it then flip it over so the wood holds it in place on the ground
then slip on the clip and kick start . hope that help, please check out my other videos as thy may help and like and subscribe , mark
Hi, mark do you know the kickstart washer that goes onto the variator can it be replaced and if so how? Because i have a working kickstart but where it connects to spin is just sheered.
Hi Mark, I bought a speedfight 2 100cc but the kick start mechanism was missing. I bought a kit on ebay which says it’s for the 100cc model and has all the parts listed in your video, but I think im missing some extra parts, i.e the shaft bushing, the shaft washer that goes on before the surclip and the shim washer that goes on the push out gear. Do you know what the dimensions of the two washers should be, Thanks
100cc parts are very hard to get hold of and e bay sellers say fits both but as you now know they do not , best try on e bay for breakers or people selling parts , this is how i started pmsl ended up with 10 speedfights just for part and kept buying . 500 speedfight later lol , its easier to get a 100cc electric starter
Hi Mark, Just want to ask whats the difference between 100cc and 50cc bendix ?
Ive got 100cc speedfight with 50cc bendix in and it wont work. Bendix itself will go in but when I put cover back on and try to start it there is is no answer from starter motor as there is something on its way.
Thanks Mark
eNeRGetyk Power hi bud well they are different bud
The 100cc has more teeth and a bloody hard to get hold of
50cc and every where and easy to get new and 2nd but 100cc parts are more difficult like the 100 cc bendix
They are also a little bigger
Maybe look on eBay for a seller breaking one rather than just the bendix and and don’t be fooled by sellers saying it will fit both as the dont
Please like share and sub
I do have a few videos on 100cc but not many
Mark
Hey Mark love your channel, what do you think of Chinese parts, eg using Chinese piston in minarelli engines, rollers and so on, is there much difference, Thanks
Most parts are from the same place
Stay away from the pistons with Chinese writing on them
But a lot of parts are good it just comes down to your budget and I’ve used both and they both work
Do you have a link for Speedfighter 4 kick start assembly kit. Thanks
Hi,
Whats the easiest way to get the springs off as the teeth have snapped/worn and that piece needs replacing?
to be honest follow this video but its the clip on the outer side then it slips out
Hi again mark my kickstart just crunches do u reckon it’s the washer on the variator pulley ?
Take it off and check it all works ok
They really can be funny buggers to sort
I'm doing one this weekend so will show you in more detail with my new video if it helps
If yours works ok off then yes it can be the washer
Hi Mark, i am struggling to find a kick start kit for a Peugeot Speedfight 2 100cc, where do you get your kits from.
oh yes you will and it will be hard to find any 100c parts but 2nd hand bud
try fb or ebay for parts or braking as that the only way
most say fit either 50 or 100 but i can tell you they dont lol
Extra thumbs up like this comment if you think the 12 dislikers are haters
Hi Mark is there a way I can contact you to pick you brains on issue I'm struggling with? Thanks
what up bud , i have over 100 videos on my channel that should help
Problème aussi sur mon Peugeot ludix
I have a few ludix videos that might help but most bits are like the speedfight
My kickstart does work but when riding it goes down. Could this be the problem aswell? Thanks Mark!
it sounds like th espring as gone so best take it off and either repair replace of take it off if it works fine on electric start
link to the new parts please
greta vid BUT U DONT SHOW US HOW TO INSTALL THE SPRING ANY HELP PLZ
There’s over 70 speedfight videos bud all worth a watch plus another channel with all of them on a play list
I do explain it in one of them but it’s a bit of a bugger lol
Just click in then spin round and click in right
Hiya Mark mate, can you show me the designated route of the throttle cable, my throttle is sticking open
I stripped the whole bike you see
@@kuhnattv8312 oh right bud
In sure you can see it in my throttle cable video on here !
But it has to follow the guilds down then under to the carb
Theres over 80 videos now bud tyre in
Speedfight mark savage
I show it in my older video too
Hi mate Iv got a speedflight 2 that won’t start it don’t even tick over and when I go to kick start it the kick start don’t move at all like it’s jammed what could it be ?
i have 100 videos on my channel that will help with all your issues , including the kick start and electric start too.
also look as carb and the steps to take
maybe even E10 fuel as in my videos
Does Peugeot Speedfight 2 LC come with side stand ?
GeekTek no they are an add on but I like the centre stand better , mk3 does , mark
Oh, cause a bought mine a few days ago and i was wondering where the side stand was. So if i want i can add a side stand and still mantain the centre stand ?
i just bought a speedfight 2 and the kick start and the mechanism are missing, the guy uses the electric start, is there a video how to rebuild a kick start
hi bud I do have over 70 speedfight videos and this video shows you the basics but don't really have any other videos on how to rebuild, all the parts sre in the videos so should help
maybe watch this a few times bud
hope that helps try watching a few of my other videos and I have another channel / speedfight mark savage where they are all on a play list
please like and sub
mark
replaced the whole kick start mechanism very easy
Hello mark ive got little problem the little kickout that i need is missing for my Sf1 and i dont know which one i need 12.5mm or the 15mm
Yea they do 2 types of dendix
They connect to the start cog so try and see the size of your start but 12.5 is normal on sp1 50cc
But can't 100% say yours is bud
Sorry to say
Maybe have a double check on your start and try and see if its smaller or matches the dendix on the picture
@@marksavage okay Mark im gonna check again for that btw i wanted to ask u if my piston is ready for changing when i ride the bike the temp goes up really fast even tho the water pump is working well
If you have check the water and changed it with anti freeze when servicing it should be OK
Temp going up is ok in hot weather , it bad if it over heats !!
Then yes it would be a good idea to change the piston and gasket set
How can you take out the pink wire out of the CDI unit to make it go faster? I have a speed fight 3
Don't !! I've done a few videos about that , please do. It do it , it was only for 4t Chinese mopeds and it didn't really work or maybe 4 mph extra , if your do it on your bike it will blow your Cdi and stop the oil pump and go wrong , hope that helps bud thanks for watching please like my videos , mark
Does it matter if I get a 20 tooth pinion and a 7 tooth kick start crank or both gotta be the same mate ?
They did two types for the 50cc and another for the 100cc
The bendix has to match the starter teeth
As for the kick that has to match the pinion
But the both have to match elec and kick
@@marksavage thanks mark much appreciated
any links on peugeot ludix one full kickstart mechanism as mine has broke for the 3rd time ?
Newbury Youts hi bud I have a few videos on the ludix but many parts are the same as the speedfight like the kick start basics but maybe time to buy a 2nd hand unit
Thanks for watcher
Mark
I just replaced mine, as the kick start was jamming (not constantly kicking down) However its still jammed, any idea what might be causing it?
77. I’ve got the same problem no idea
I now have that problem, when i put cover back, mechanism doesnt work, kick starter doesnt go down, it is like stuck😐
@NIKOLAJS RUBANIKS Turns out I needed to file the teeth down slightly on the the kick start The half moon part.
Searching everywhere cant see how to get the spring off 😕
Under the kick start on the outside is the clip like in my video , get that off and it pull out
@@marksavage cheers mate I knew about the clip because of your video but for some reason I thought I had to disconnect the spring first I've done it now all sorted and back on correctly I do have a question though..the small cog that comes out to meet the variator has a clip around and on that clip there is a U shaped bit that comes down into casing the one they sent seems at lease 1cm shorter than the one that came off (old one severely bent so can't re use) will this still function the same ?
Its i possible to get that horse shoe ring of or on without bending it
There’s a tool you can buy other wise it’s a bit of a game but it will come off or ping off lol so be ready for it bud
I liked because you have tattoos lol