Salt and Rinse Aid | First time Filling & Setting l Voltas Beko Table Top Dishwasher DT8S (#2)
Vložit
- čas přidán 4. 11. 2020
- You can connect with me -
Website : www.bhuvanaadis.com
Email : bhuvanaadis@gmail.com
Facebook - / lifefoodtravel
Instagram - / bhuvanaadi
Twitter - / bhuvanaadi
=============================================
Buying link for this dishwasher -
amzn.to/3l3kFSb Amazon
fkrt.it/978tYmuuuN Flipkart
=============================================
Watch the full playlist of videos of this tabletop dishwasher here -
• Voltas Beko DT8S Table...
In this video I have shown filling salt and rinse aid for the first time in Voltas Beko Tabletop dishwasher DT8S.
It is a cute little tabletop dishwasher and is best suited for small families, 2-3 people and rests comfortably on the kitchen platform.
Dimensions -
Height - 59 cm
Width - 55 cm
Depth - 50 cm
Weight - 25.5 kgs
I have also shown how to set the salt and rinse aid consumption levels in the machine.
I shall follow it up with more videos showing control panel, internal parts, features and also demo of various cycles with different types of dishes.
I shall also post a video giving my opinion and review of this model listing out the pros and cons.
Keep watching!
Thanks for all the love and support!
#voltasbeko #dishwasher #tabletop - Jak na to + styl
Ohh...this is something new....how to change salt and rinseaid setting ..I never knew this. Even the service person didn't tell this. Thank you soooo much Bhuvana for sharing this.....
Glad that you found this useful.
Superb video... Very informative and no fuss... To the point...
Thank you for your kind words of appreciation
I love your videos and how you explain everything so nicely
Thank you so much!
Nice to watch such useful videos no one clearly said like this about rinse aid. Once again tq u🙏
You're welcome. Glad that you found the video useful. 🙏
Nicely explained. Given lots of information.
Thank you Sujatha that you found the video informative.
Thank you mam! It really helped me use my dishwasher
Glad that you found the video helpful, Sheethala.
Oh got your video again, thanks for detailed information!
You are welcome
Thank u for explaining so well in detail ❤ it was really helpful...
Glad you found the video helpful. Thank you.
Thank you. I've read the whole manual to find where to do the settings for rinse aid. No luck!! Thanks for the video and for showing us how to do it. The demo person did not do much good on the demo 😂 Also your videos helped me in choosing the dishwasher and operating it. You are doing good...
Thank you Twinkle for your appreciation. Glad to learn that my videos helped you in deciding to buy one for yourself.
Good luck and happy dishwashing!
Thankyou for this video. Very clearly explained. The installation person did explain, but I didn't get it then. 😀
Glad you found my video helpful. Thanks.
Excellent explanation
Thank you.
Thank you so so much. You explained much better than the service personnel. Watched your videos even before buying. I bought the machine day before and have been using with some challenge - mainly because of inexperience. The service centre’s people recommend so many things that are contrary to the manual - such as do not adjust hard water setting, no need to run a wash cycle after adding salt. In fact the guy left the salt lid a bit open when he went, salt was all over dishes in the first wash!!! Even the manual is not that updated. Your video was perfect. Eagerly waiting for the next ones. One point: for the mini and the eco cycles, the detergent stays clumped in the dispenser if we add the recommended amount. Service personnel asked to add less and elevate the drainage pipe a bit. Manual also says that salt light indicator may stay on for a few days even after adding salt. This was not true for me, the light went off. Also, the manual says we can take the filter apart but I was unable to do it. Could you please show if that happens when you do a video on it? Thanks
Thanks for liking my videos. And thanks for sharing your experience and views. You are right about the installation person/service centre recommendations. Yes, even for me the salt light went off immediately after salt filling contrary to what is mentioned in manual. Regarding the clumping of detergent, this happens if the compartment is wet or the detergent is not dry (but moist). Detergent is hygroscopic and becomes wet if not stored in air tight containers. However will share my experience on this in my videos.
I shall post a video on filter cleaning very soon. Stay tuned. Thanks for your patience, love and support.
@@BhuvanaAdi Thanks a lot for the detailed reply! Must say again - love your videos :) Look forward to the next ones.
Well explained 🙏
Thank you.
Thanks for making this video...
You're welcome Shashank!
Thanks alot really helpful
You are welcome.
I recognize that measuring cup.. it comes with MuOut! 🙂
Very nice
Thanks.
Thank you mam
You are welcome.
Thanks a lot. I just got this dishwasher and this video is very useful. Is finish brand good?
Hi Revati, congrats on your new dishwasher.
Yes Finish is a very good brand. But which detergent gives good cleaning results depends on your water quality.
Watch the various detergent videos in my channel given as a playlist below:
DISHWASHER DETERGENTS/TABLETS/GEL: czcams.com/play/PLvZ681nV6tYpjbPPiogP2RIuDgCtx5Hg6.html
Also watch my other videos on the Voltas Beko dishwasher:
Voltas Beko DT8S Tabletop Dishwasher: czcams.com/play/PLvZ681nV6tYr5zV7rtAy0sU2iPze_7o97.html
Thanks.
Ma'm
I recommend you to watch technology connections dishwasher video.
If you find that helping, then please make a video about it.
Hi, thanks for sharing about this. I've seen this video.
But I did not understand what you're suggesting. Do you want me to make video on that or a video similar to that video?
Very nice I'm interested to buy this model so, a great help🙏
Thank you Bindu.
You were showing another dishwasher mechine demo so which one is good
Hi Hasena, recently bought the Voltas Beko tabletop dishwasher. I've just started using it. I can tell how good it is only after using for some time.
Very nice I am interested to buy madam
Hi @Parvathi, this model is available on Amazon.
Can we wash cooker and big kadahi
Yes why not, cooker and kadai can be washed in this dishwasher. I am coming out with videos showing various dish loads using different program cycle in this dishwasher. Stay tuned to my channel for the same. Thanks.
Hello.. we bought DT8S model. Going to run the first cycle. Do we have to run a mini cycle with just salt initially? I understood it that way in the manual. Is it like that?
Hi, if I remember rightly the technician who comes to install the machine does it usually. If not you can run a Mini cycle after filling salt. And then you are ready to operate your dishwasher.👍
Hello ma'am, should there be a gap between the wall and the table top dishwasher from the back?
Hi Divya, you can leave a gap of say 10 cms, that will suffice.
Madam do we need to add fresh water in salt chamber for every salt refill ?????
No you don't need to add water everytime you refill salt. Water is added only the very first time of filling salt in the salt compartment.
Mam aluminium pressure cooker, kadai dhk sakta kya?
Aluminium high temperature mein black hi jaata hai. Isliye manufacturers aluminium ko dishwasher mein dhone ke liye recommend nahi karte.
Par daily use ka aluminium bartan ko short cycle jo low temperature mein chalta hai, us program mein daal sakte ho.
after filling salt
Instead of finish tablets can we use liquid detergent for washing..any brand in particular
Hi Smitty Koshy, if you mean Finish liquid instead of detergent (actually they have gel not liquid), then it's ok. But if you mean manual dish wash liquid like Pril, Vim etc. , no you are not supposed to use them as they cause foam and this is not suitable for cleaning in dishwasher.
@@BhuvanaAdi ok thank u
Hi mam... very useful videos on the dishwasher mam.
I have ordered my first dishwasher, was doubtful before but after your videos it gave me the push to get it:)
I have a doubt , if we use the tablet do we need to add rinse aid mam? I am planning to get Crystal tablet + salt combo. Also what is your view on this product mam?
Thank you for your time.:)
Congrats on your new purchase Saranya!
Using rinse aid is your choice. Many people avoid using rinse aid. It helps in drying the utensils and giving it a shine. Also if your water is soft you can skip using it. But it's better to use in case you've hard water.
Since you plan to use Crystale tablet, tablet has rinse aid to a certain extent, so you need not use rinse aid. But if your cleaning is not good you've to use it.
Most importantly you've to adjust your salt/hardness setting based on your water hardness to get good cleaning results.
Thanks.
@@BhuvanaAdi thank you so much for your timely response mam.
I use fortune dish wash powder.I find that sometimes some washing powder is left behind in the soap container. What could be the reason.
Hi Sunita, sorry for the delayed reply. There could be a few reasons for this. I'm giving below some solutions which you can follow to avoid this :
1. After loading utensils, always check that the detergent compartment is dry, before filling the detergent.
2. Choose the correct wash program based on the amount of soiled dishes you load. For a heavier load with more soiled dishes, you may have to choose a higher temperature cycle, where there is more rinsing, in which case the detergent would be totally used up.
3. Try to fill the right quantity of detergent based on the load. Less for less soiled load and more for more soiled load.
4. Adjust the detergent quantity based on your water hardness. Soft water uses very little detergent.
Hope you find the answers useful.
Good luck.
Madam how is fortune detergent rinse aid and salt..can i use them
Yes you can. Fortune products have improved their quality greatly in the recent few years. But to the best of my knowledge, they give good results in hard water. Rinse aid and salt do not matter, you have to check if the detergent gives good results for your water. Thanks.
@@BhuvanaAdi thank you madam
1st time they come and do it .Then how are we to know when we need to fill and what amt of salt shd be filled same 1kg or less than that..
Hi @lalitha, you have salt indicator for that. When salt is low the indicator will glow by which you will know that you've to fill salt. You can do it yourself. I've shown and explained various things about this dishwasher in a series of 11 videos which you can find in this playlist given below. Please click the link below to watch all the videos. You will get answers for all your doubts and queries after watching them.
Voltas Beko DT8S Tabletop Dishwasher Series: czcams.com/play/PLvZ681nV6tYr5zV7rtAy0sU2iPze_7o97.html
Hope this helps. Thank you.
Mam dishwasher pe water supply pressure Heavy speed hona chaihe kya?
Hi Raja, washing machine jo water pressure hai, utna hi dishwasher ko bhi chahiye hoga.
Hi Madam can you please give me quick replay. For new machine 1st time if we use without finish salt, that is fine or mandatory to add finish salt??
Hi Umesh, are you asking if it is compulsory to add Finish brand salt for the first time?
You can use any brand of salt.
Do we need to use salt and rinse aid with tablet
Not required upto certain level of hardness, beyond that we have to use salt and rinse aid even if using tablet.
Mam, can i use any liquid as rinse aid???
No rinse aid is the liquid which is made only for Dishwashers. You cannot use any liquid for that.
Moreover rinse aid is used for drying of dishes and getting them streak free. You can avoid using rinse aid if you don't want to.
Will it work well with Water having high hardness of TDS around 1300
TDS 1300 is very high for a dishwasher. Some manufacturers mention it can work upto 900 TDS but my personal opinion is that to get satisfactory cleaning, the TDS should not be more than 600 to 700.
Please consider fixing a water softener to bring down the TDS before considering a dishwasher. Thanks.
@@BhuvanaAdi True i cancelled the order...Initially planned one for mom but got to know that it wont work well... Thank you very much Bhuvana....All the best for you and to your channel...Subscribed.
@@anandhakumarpalanisamy.5725 Thank you very much.
Thanks.
How will you know that the time for salt refill is there? Does it show as it does with rinse aid ,
Yes, the salt indicator will light up once the salt level goes down and needs refilling just like the rinse aid indicator.
Thanx for replying
How to do Filter cleaning . Is it required to clean after every wash cycle
I will be demonstrating on how to clean the filter of this dishwasher in my video series.
Not needed to clean after every cycle. May be once a week or depending on how frequently you use the machine and how soiled your dishes are on a regular basis.
But depending on how dirty it gets, change the frequency of cleaning. Thanks.
I don't think you have to clean at all if you remove most of the food particles and run longer cycles regularly. Because the detergent itself is strong enough to dissolve all the food particles at higher temperatures like 60 70. I was just surprised to see even after 1 month I couldn't find a single rice particle in the filter.
Mam, I have voltas beko table top dishwasher. I am in Pune, using municipal water supply. It's been 8-9 months since I have filled rinse aid but it's still not empty. And required to be refilled after 6-7 months since first filling.
Is the dishwasher working fine ?
Hi Mohit Kumar, Pune water is very soft. I am sure you must have kept your salt and rinse aid setting to the minimum level.
Have you been using the dishwasher every day, at least one cycle, in these 8-9 months?
What is your rinse aid setting? How much rinse aid did you fill initially and can you see the marking inside to check if it is full or empty or partially used? Please check it.
If your setting is kept at the lowest level, it will not be consuming at all. You can increase by a level if required, based on your cleaning results. If you're happy with your cleaning with the current setting, don't change anything.
In any case, i think you need not worry as long as you are happy with your cleaning results.
Thanks.
How will I know what hardness level is best for me..I m in delhi.. I bought this machine recently. Also what is the benefit of keeping rinse aid level to 1.. and waht do the levels of rinse aid mean?
Please watch my video on water hardness, salt and rinse aid setting, etc.
czcams.com/video/-jHUQwX82l4/video.html
I think you will understand salt and rinse aid better after this.
To know the water hardness at your home, you have to give a sample for testing at any food/water testing laboratory. Thanks.
What Ma’am said is the best way. For a rough estimate you can google for some government reports. I also bought a TDS meter on Amazon (around Rs 200) to arrive at a rough estimate. You can also ask your local aqua guard repair personnel - they know. If you buy a big machine then they will provide a water hardness test strip. Your local Beto service centre may know if they are competent - you can get their number from the Beko customer care. Strips are also available on Amazon but a bit expensive. For me the service centre people just asked to keep it at factory setting despite very hard water.
plzz bring video.. every alternate day.. u tke 1 week to upload video.
plzz mke it fast
Sorry for taking time to make videos. I've to accumulate the correct load of soiled dishes for running a cycle. I can't just keep loading whatever dishes I have, then I will get comments that I have not shown washing of soiled dishes.
I want my videos to be genuine. Please bear with me. Shall try to increase the frequency though.
Thanks for your suggestion and your patience.
Hi. First comment and view
This type of adjusting salt and rinseaid is seems to be new to me
I use L G
Good
Keep rocking
Eagerly waiting to see the washing on this machine
Thank you❤️
Thanks for your support as always! 🙏🙏
Mam full load pe daily one time machine chalega to 120ml rinse aid kitna din backup dega?
Woh aapka setting sure water quality ka upar hai. Water soft to medium soft hai toh, kareeb 3 hafta aa jayega.
Maami can we take a jar put 0.5 kg salt and 500 ml water and pour it in the dish washer directly ? or how much water should we use so that we avoid water overflowing ? please advise.
Hi John, whatever amount of salt is required has to be filled the very first time. Even if the water overflows there is no problem. You can fill the salt and add water or do it simultaneously. I've explained it clearly in the video.
How long will the rinse aid last ?
There is an indicator lamp which glows when the rinse aid level goes low. How soon the light comes on depends on how many cycles we have run and also on the rinse aid setting in the machine. Thanks.
What should be the rinse aid level? Am from bangalore n water hardness is high here
Hi, sorry for the delayed reply.
Best would be to get your water hardness tested from a water testing lab so that you can keep the correct salt and rinse aid setting in your machine.
The harder the water, the level has to be increased so that you can avoid scale formation on your vessels and the interiors of the machine and also for good cleaning results.
The correct setting will ensure the correct amount of usage of all the consumables.
My TDS is 500 ppm. What is the salt and rinse aid setiing I should use.
Your salt setting should be H5. Rinse aid setting can be kept at 3, and you can increase if dishes are not drying.
How to set salt level? 3:17
Which finish tablet is best..there are many variants on Amazon n it's a bit confusing
Don't go for finish it's costly. Go for other brands they are cheap and best
Hi, sorry missed replying this. Finish detergent with rinse aid and salt combination gives good cleaning results. If you want to use only tablets, according to me Finish Quantum Max is the best, though very expensive.
Madam.. I am planning to buy dishwasher for past 3months.. But am hesitanting Bse my water hardness is 900...pls suggest me... In the videos when I calculated it comes setting 8..shall I buy?
Hi Gheetha, can you please test your water hardness for calcium and magnesium in any food/water testing lab so as to know the correct TDS of your water.
The harder the water, the more difficult it is to get effective cleaning of dishes in spite of keeping high salt and rinse aid settings.
If you can connect a water softener to your water supply, then things can improve a lot, in which case a dishwasher can be used.
Few of my viewers are using a dishwasher with TDS above 1000 ppm. But I do not know, how cost effective or the cleaning efficiency is in such cases.
Thank you.
I just bought DT8B model and ran an Intensive cycle with Vim matic tablet. After the cycle, I see that the tablet was hardly dissolved infact the cover of the tablet was not dissolved. Not sure what's wrong. Any idea?
Hi Deepak, there could be so many reasons for this :
1. Over cluttering and dishes blocking the detergent compartment, i.e. improper loading
2. Compartment being wet while placing the tablet
3. Any power cut during operation
4. Dishes not very soiled
Anyway did you check if the dishes were hot? Did the program run the full time 2h 40m?
Try once again the same way taking care of the above mentioned points and see what happens. I'm sure the tablet cover will dissolve and it will be fully used up.
Please let me know after you've tried a couple of times. Good luck.
@@BhuvanaAdi Hi Bhuana, yes the dishes were hot and the full cycle ran for 2:40 I think. Anywsys, just to be sure, I think the problem was that the tablet compartment did not open or something as it was closed when I opened the washer at the end. Usually, it should be open, right?
@@deepakdeval1723 you're right, it should be open at the end of the cycle. May be something was blocking and hence the door would not have opened.
Please try in all the cycles.
537 tds meter explain how much hardness
To know the hardness, you have get a sample tested in the lab. Thanks.
Mam Or ek baat.
Machine chalaya but detergent machine liya nehi.only raw wash hua. Aisa kyu?
Hi Raja, detergent compartment dry hai kya, check kijiye, detergent daalne se pehle.
Can i only use the detergent powder and skip the rinseaid?
That's your choice. Rinse aid is mainly for getting spotless cleaning and drier utensils. You can skip it if you want to.
@@BhuvanaAdi thanks for the info.
Bhuvana i live in mumbai .i recently purchased lg true steam dishwasher.i m using only finish all in one max tablet witout adding salt or rinse aid to dishwasher.giving good result.but can i use tablet along with salt and rinse aid.pl reply
Hi Ami, since Mumbai water is very soft, detergents combined with salt and rinse aid at the lowest settings will give you good cleaning results. You can try that out if you have not.
In case you're using tablets, you need not use salt and rinse aid.
@@BhuvanaAdi Hi I am also staying in mumbai. Based on your videos purchased Voltas beko 8 4 days back and I am cursing myself for not getting a dishwasher many years back 🙄. thanks for such detailed videos.
My question is I am using finish tablet. I have seen that the dishes don't dry much in any of the modes and there is some water on the floor of the dishwasher. Do I have to change the rinse aid settings for tablet also to 1? It is in default 4 setting right now.
I also noticed that as soon as the washing is over I open the door and the vessels are not very hot I am able to take them out. It is hot but hot very hot that I cannot touch. Is there any problem?
Please advise. Thanks in advance
@@padupaul9439 hi, congrats on your new purchase. Yes dishwashers are indeed a boon to every household.
I am aware of Bombay water quality. I don't think you have to use salt and rinse aid in case you are using tablets, as Bombay water is very soft.
But for the soft water, you can actually use detergent with a combination of salt and rinse aid with their levels set at minimum.
In case you are happy with tablets and plan to use them on a regular basis, you can set both salt and rinse aid to zero. You try this way for a few weeks. Depending on the cleaning quality, you can decide whether to use rinse aid and salt.
Please change the default settings of 4 which is very high for your water.
After the program completes, wait for at least 10 minutes and then open the door slightly. Leave it open at an angle for say 15-20 minutes before you open the door fully. The vessels should be dry totally except for plastics which do not dry easily in a dishwasher.
After following this, of you still feel drying is not enough, may be the rinse aid content on the tablet is not enough for drying. In that case, add rinse aid and keep it a lower level setting.
About your vessels not being hot after the completion of the program, you have not mentioned which is the program you use regularly. Generally vessels will be hot only in cycles like intensive. But in this dishwasher, the drying time at the end of most cycles is long, that could be the reason for dishes not staying very hot.
Please try out all the programs and check if this the case always.
In case, after trying out all the above, you still feel there is water in the bottom and dishes are not hot, please feel free to call for service. But, I don't think that may be needed.
You please start observing and noting down various combinations to understand your machine better.
Hope my answers help you.
Thank you.
@@BhuvanaAdi Thank you so much for detailed response. Will start noting down as suggested.
Two times when I washed using clean and shine mode the finish tablet didn't dissolve completely and there was traces of the tablet in some vessels I had to rinse it again by hand.
Also once in intensive mode the tablet remained intact in the compartment though the box was open. The vessels got washed just in hot water. After an hour of cooling the dishwasher I again started the same mode and this time it got cleaned properly. Didn't do any changes don't know why the first time it didn't function properly.
@PADU Paul hi, this happens if the compartment is even slightly wet while placing the tablet or even if there are not enough soiled vessels in that particular load. That is why it is a better option to use detergent, rinse aid and salt than tablet on many cases.
I've explained about this in detail in a video in my channel. Please watch that to understand this concept. Sharing the link below:
czcams.com/video/zw8le3B9w8s/video.html
Good luck for your experiments.
Thanks
In 14w for first time, when I added salt with water still showing red.
Hi, hope you added at least a kg of salt. Sometimes, it takes a couple of cycles before the salt indicator light goes off. Just wait for a few days.
Mam plzz tell me how often do we need to fill the salt actually last 3months to we are using dishwasher still it's not showing salt indicator light so please🙏 tell me what should I do actually in our areya very soft water so need to set salt level must or no need 🙏🙏🙏🙏 tell me mam😢
If the water is very soft, you don't need to add salt. In which case you could keep salt setting to zero. If in doubt, you could add salt and keep setting at minimum, say 1. Thanks.
@@BhuvanaAdi thank you mam
I have read reviews in amazon it dont clean utensils properly, what is your review. We are family of 3 want to purchase, but i have not seen people washing 3litre cooker and big kadahi
Hi Smriti, please stay connected to my channel. I'll be coming out with many videos showing washing of cookers and kadais in this dishwasher soon.
Except for the capacity it is the same as any normal dishwasher. Also there are just 6 program cycles without any additional options. Yet these are sufficient for washing our day to day utensils.
the manual say quick cycle
This is just to wash off any spilt over salt in the bottom of the machine.
Buvana by mistake nenu Tata salt vesanu kada.so vessels are not cleaned.so maid washes my dishes.so salt consume avvalantey em cheyali without loading dishes. please help me buvana.settings ela change cheyali salt consume ayibovalantey.
Oh this one? I did not see, may be must have missed it.
Salt settings ela cheyaali ani oka video lo explain chesaanu. Please meeru aa video choodandi. Kinda link undi:
czcams.com/video/0o4Iq0Gx0J8/video.html
Thanks
I notice lots of reviews in Flipkart and Amazon saying very poor customer service from Voltas is that true.?
@@ArunSinha1414 This is a subjective matter and I cannot comment since I have not experienced it. Individual experiences may be different. It's been working fine for me for 4 years and I have not had the need to call for service till date. Thanks
Omg... I added salt first.... Wt to do know
Did you add water after adding salt?
@@BhuvanaAdi not yet
@@maninderkaur8851 of you have added salt, the first time you have to add water.. You can do it now.
@@BhuvanaAdi ..... Ok should I now pour 1 ltr of water?
@@maninderkaur8851 pour water till it starts overflowing
U have 2dishwasher
@kanika's world, Yes i have 2 dishwashers. My 9 year old Bosch and this Voltas Beko which I bought in October.
fortune 30 tablet cost 440/-
fortune Detergent, Salt, Rinse aid Cost 470/-
whereas the Detergent and Salt will last for 1 month and rinse Aid will last for 2 months
so now,
which would be more cost effective
Tablet or combo pack
i m from MUMBAI
Salt hardness H1
rinse aid on Level 1
Hi, it is not a question of which is economical but which is suited for your conditions. I think for soft water in Mumbai, you can use Finish. Fortune works better for hard water. And use detergent for short cycles and tablets only for long cycles. This is my suggestion. Finally it is your choice. Thanks.
@@BhuvanaAdi mam finish is way expensive..
so thought of goin to IFB detergent or fortune tablet
i use dishwasher 1ce in a day
n utensils are of 2 members in whole day
Dear Bhuvana Didi,
Can I leave the rinse aid setting on four even for the eco mode? Because in the manual, they have mentioned that for the eco mode, it has to be on level 6.
Waiting for your reply. 🙏
Hi, you have to set the rinse aid and salt setting based on your water hardness.
What is your water hardness?
@@BhuvanaAdi Di, I have no idea about the water hardness. But by your reply I understood that the rinse aid setting depends upon that ..I may need to check with my RO technician .Til then, I will keep it on the factory setting.
Thank you for your valuable support. I admire you a lot.
@@Seemaverma405 I'm sure you must be knowing whether your water is hard or soft.
Get your water tested in a lab to know the hardness. You can then adjust the settings based on it.
Please try to help me
We don’t have to put 1 lt water just one glass is enough for 1 kg salt
Hi Deepti, 1 glass of water is not enough. Initially you have to pour a litre of water in the salt compartment.
@@BhuvanaAdi the company executive told me to put one and a half water in it…nearly half liters…
@@guptadpt13 He would have told like that as the capacity of the salt chamber is less. After adding one kg salt, it may not take more than a glass or two of water.
But if you add half kg salt, then more water can be added.
@@BhuvanaAdi thank you dear for the info…🙏🏻🙏🏻
Yesterday my voltas beko 8 place dishwasher was installed , he didn't put water in the salt chamber, that's why my dishwasher is showing no salt error, I asked him why after putting salt it's showing no salt, he told me Machine will take time,after sometime it'll automatically detect salt☹️.
Still now it's showing no salt and no rinse aid 😔
Congrats on your new purchase.
Thanks for sharing this. I've shown in my very beginning video about filling salt and rinse aid for the very first time in this dishwasher. Please watch it here if you have not yet watched:
czcams.com/video/TKO8kdDHeLw/video.html
You have to fill water and salt in the chamber. I don't know why the installation person didn't do this.
This is even given in the manual, you can go through it.
You can even complain to the company on incorrect installation practice.
Regarding salt and rinse aid light not going, sometimes it takes a couple of cycles before the light goes off, nothing to worry.
In case it doesn't within the first few days, you can give a complaint.
@@BhuvanaAdi thnx
Buvana y don't u gv reply
Hi Srilakshmi, I always reply to all the queries. Which one did I not reply?