Welding repairs on log grapple
Vložit
- čas přidán 7. 09. 2024
- This log grapple has cracks that need gouged out and welded...then some plates will help it stay together
CHECK OUT THIS GANG MOWER
Help me out with a comment & share on your social media
• Minion mower rig gang ...
For ARCCAPTAIN products use this link www.arccaptain...
Remember to enter promo code NBSWELDING5% to get 5% off and a free gift
For T-shirts send Tina an email request at nbswelding@aol.com
For Thrive Supplements use this link nbswelding.le-...
Great repair. You sir are worth every penny and your customers are lucky to have you.
Thank you kindly...good to hear from ya...thanks for watching and commenting
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
that little torch table just impresses the hell out of me
also im young. i scarf everything, dont want to carbon arc off my bobcat. ill have to try that straight cut through. amy tips for the bigger gaps at the bottom of the gouge? half the time i try to key hole it wants to blow out on a bigger that 1/8" gap
I've used it in many videos
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
That is a really cool copy torch system isn't it!!!
Thanks CB, nice repair. You never know what you're going to get into .nice shots of your torch work. The flame probably helps to burn off all that oil. Keep up the great work.
Thanks 👍
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
These are my favorite of your videos. I love the equipment logging stuff. 😅 if that was me on this repair I would have been very nervous about all that grease catching on fire. I definitely would jammed a FR blanket in there , just because of my anxiety . Always rad stuff dude.
👍
The wiper motor in my 1988 Chevy k1500 Silverado 4x4 didn’t have the circuit board in it so I just had to replace the whole motor but if there’s a circuit board in yours resoldering should fix it Tapping the break pedal at a 🛑 here is a California stop 😂
Gotcha...10-4
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Good repair job. Really liked the cutting table. Just and idea for you. Making a video on all the different cutting touch’s you have alone with and explanation of there use and the different tips. I’ve seen rosebud touch’s that are used to heat propellers hubs up to jump them onto the propeller shaft taper on towboats. And the same heating applied to remove them. They produce a huge amount of heat. You have a great deal of knowledge and there beginners out here who benefit from your sharing. Your videos contain lots of information that you probably don’t think a second thing about but to others it’s a world of knowledge. Thank you for sharing.
Thanks for watching and commenting
CHECK OUT THIS GANG MOWER
Help me out with a comment & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Agreed.
Nice job as usual CB, you sure do prove you don’t need all the fancy expensive equipment to do a quality repair. Maybe just a little resourcefulness.
Have a good night
Thanks 👍
CHECK OUT THIS GANG MOWER
Help me out with a comment & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Thank you for speaking in a more relaxed voice, today. I enjoyed it and the video.
Glad you enjoyed it!
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Wicked torch work
Nice end result thank you for sharing
Cheers from Nova Scotia
Thank you! Cheers!
CHECK OUT THIS GANG MOWER
Help me out with a comment & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Love that pattern torch thing it is cool as hell. We have worked on quite a few of those grapplers as well nice repair/reinforcement. My uncle in WV was telling me how hot it was this morning. We haven’t had a drop of rain in 3 weeks here in central NC. Been to a few logging jobs recently that made me real nervous as far as fire since it is so hot and dry. Stay cool and safe out there buddy.
Thanks...stay cool
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Beautiful job CB. Love the explanation of the abbreviation of the stop sign.
Thank you kindly
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Better than new. Great job👍🇺🇸🇺🇸🇺🇸🇺🇸
Thank you
CHECK OUT THIS GANG MOWER
Help me out with a comment & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Awesome Job CB thanks for taking us along Always a lesson 👍😎💪💪💪
You bet
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Nice repair job as usual! 👍🏼💪🏼 I kept sitting here waiting for something to catch on fire and it didn’t. Whenever I work around stuff like that there’s always a fire lol.
Some bark caught fire on the ground and some grease flared up on the grapple but no big deal
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
awesome repair. Always learning something when i watch your channel CB
Glad to hear it
CHECK OUT THIS GANG MOWER
Help me out with a comment & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Nice job! I appreciate the way you narrate and explain your logic in how/why you dooze it
Thanks
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
That should do it!! Good job!
👍
Pretty work, C.B., keep it up 👍👍👍
Thanks, will do!
Great job; it ought to hold. I like arc gouging when available.....but also purchased gouging tips for my torch, for exactly the reasons you mentioned. It just increases versatility, & I don't have to have a big compressor on site to accomplish the same thing.
Thanks for another great video!
Right on
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
nice result
Thanks
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Hey C.B. D.P. here, you can repair the circuit board in your wiper motor very easily. I've done quit a few over the years. Your friend is correct the solder joints crack and cause the wipers to either not work or to work then stop work not park start up again , in other words your wiper motor gets a brain of it's own. There's only one wiring plug that you disconnect then there's 3 screw on the black plastic cover, remove those screws and the cover. Once you have the cover off there might be one more screw holding the board in. the board should lift out with no more wires attached inside the motor. on the back of the big black plastic plug you'll see 5 tabs coming through the board. Look at them closely for cracks. Once you locate the cracks, get out your carbon-arc and gouge out all the old solder. No,no,no just kidding, you can get out your soldering gun,torch or iron and reflow the solder. check for any other cracked solder joints and reflow the solder on them. Install the circuit board being careful not to bend the 2 contacts sticking up off of the black plastic plug on the board. install the screw if there is one, install the cover and the 3 screws plug the harness back in and you should be good to go. Hope this helps. Nice repair on the grapple, those things take a lot of abuse. I sent you an email.
Thank you for the information...appreciate the help on it
CHECK OUT THIS GANG MOWER
Help me out with a comment & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Nice job👍
Thanks 👍
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Great job, it sure is hot outside.
It sure is
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
NIce repair that young man.
Thanks 👍
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Just when I thought I've seen everything, yo go and make a template with duct tape. Again proving use what you got that way you have everything you need. Nice job👌
You know it!
CHECK OUT THIS GANG MOWER
Help me out with a comment & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
I repair quite a few of these grapples every year and that’s the best repair you can do without disassembly. I’m fortunate enough to have them brought in to the shop where I can pressure wash and tear them down
I'd do more if they would take it apart
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Great repair
👍
Great job cb, thanks for the video
You bet
CHECK OUT THIS GANG MOWER
Help me out with a comment & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Awesome video thanks.
Glad you liked it!
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Also I saw the tags on the stack of logs wonder if that is like the woods yard here where people buy them for whiskey barrels on site there.
I don't think any of that goes for barrels...dunno
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Another video to enjoy! Those plates look like they were factory installed.
Thank you
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Great Job CB.....The NBS Welding Expert..............Why just repair, when you can make it 5 Times Stronger.........Always staying ahead of the Curve in a World of People over working their Equipment.
They should be thankful you do what you do for them.
Have a Great 4th of July.
You too thanks
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
There's a lot going on, with this one.👍
Yep but we got it
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Awesome video
👍
Try running a wire from the body of the motor to the chassis ground. Worked on my 98
Thanks for the tip...I'll try that
CHECK OUT THIS GANG MOWER
Help me out with a comment & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
That was a lot of work but it looks great should last a long time now
Won't last forever but they should get more than enough life out of it to cover what was put into that repair
@@NBSWELDING well I agree
Was definitely thinking that that pin on the broke side looked quite new...😕
Yep...brand new
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
😎
Thank you 😊
that was a lot of cracking on there
Sure was
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Looks good to me.
Thanks
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Good to go
Yep
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Wiper module just unscrews from wiper motor 3 screws get it from rock auto under $35
Thank you
CHECK OUT THIS GANG MOWER
Help me out with a comment & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
I used to work in a chevy dealership back in that era, we replaced lots of those modules. Like @acmemaching stated just three screws. If they strip the head just break the plastic module and get a pair of visegrips on the screw.
Love your videos and your repairs . Beautiful job done. Did you make that pattern table? Thanks CB!
In 1991 I built the base...watch this video that tells more about it
czcams.com/video/pm8bsiNu_Hs/video.htmlsi=LXk0T5lfxO56z6dv
Man u lay a pretty weld down
👍
I used a scarfing tip for a lot of my 20+ years in the mobile welding business before getting a Hypertherm 45XP plasma cutter with the gouging mode. Both work great, not that a carbon arc torch doesn’t have a place but, I’ve never owned one. I’ve used other people’s but never saw a reason to go out and buy one.
Hauling an air compressor big enough for the carbon arc is the issue for me
CHECK OUT THIS GANG MOWER
Help me out with a comment & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
That aint going no where...👍
Right on
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
👍
👍
Place an ice pack on the back of your phone or camera.
Where u at n wv I just found your channel im n Elkview wv great videos man
Buckhannon 👋👌
wiper control board is replacable under the cover of the motor I have done many of them
Thanks
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
😻
👍
Well CB , I am new to your channel
I am. Impress by your talent and workship , man your are capable
Quality of your video etc
Question= i am having trouble to weld with 7018 rod
You seems to have no trouble at all and so as other welders !!!!
I. Cleaned my materials ,tried different amperage ( like you 125 amps ) lowerr amps high, dry rods, different brand etc I cannot get it going ??????
I am frustrated about it, i am a beginner welder , not trouble with mig,,,,
What can you tell me about it ,if you have a little time to comment
Thanks in advance wish to spend time one day beside a guy like you to get experience
Very good job and hoe you approch it
Serge ( from Mtl )
Practice and develop understanding of arc length...long arc makes a hotter puddle...short arc cools the puddle and increases control of arc direction
Arc direction---arc direction is part of control--practice and develop the ability to direct the arc where heat is needed until that spot is hot then redirect arc to a cooler spot
Weld will get hotter as you go...long arc length to start with then shorter arc as you proceed so it doesn't get too hot
CHECK OUT THIS GANG MOWER
Help me out with a like, comment, & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
Thank you so much for advice , well welcome , i will try that
Looks like crackalation to me
Exactly....crackelation situation in need of a proper doozination
CHECK OUT THIS GANG MOWER
Help me out with a comment & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
gee, dunno what your problem is, there is at least 1/4 inch of metal left holding that all together... better not fart on that!
Yep
CHECK OUT THIS GANG MOWER
Help me out with a comment & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
.
Thanks for watching and commenting 😉
CHECK OUT THIS GANG MOWER
Help me out with a comment & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM
👍
Thanks for watching and commenting 😉
CHECK OUT THIS GANG MOWER
Help me out with a comment & share on your social media
czcams.com/video/fJbMjetltTc/video.htmlsi=i_PTXBeUL5IewtcM