Very nice review. Direct to the point. No fillers, no useless stuff or other nonsense. Very informative. I wish there are more reviews like this. Thanks a lot.
Useful review. Thank you. Would it be possible to tell me how much this weighs exactly? I’m looking to get this for backpacking and weight is important
Great review! I'm thinking of getting this for my telescope, would this be able to hold it with the weight being unbalanced? And can you make precise adjustments with it?
It could, but it depends on how long the other end is from the center. As for adjustments, you can do fine adjustments,but dont expect it to be very precise
Thanks! Yiu can check out Andoer Q160H. It has 5kg load capacity and is horizontal mount capable. Or you can check Manfrotto Be Free Advance, a bit pricey, but worth it. This is what Im currently using.
Total weight nyan sir is 1.255kg, max load capicity is 8kg per specs. Kaya naman yan. Pero just to be sure, you might need to hook some weights para mas stable
I can see there's quite a bit of woble with the center column extended. Would you trust it for longer exposure shots in any configuration, like over 3 seconds? I am using Fujifilm X-S10 with lenses that do not go above 500 grams of weight each. Thank you very much for the review!
For configurations that has room for weights to be attached at the center column hook, its stable enough for 3secs exposure shots. But for configurations where the feet are wide apart and the center column fully extended, adding weights could be impossible, hence you may still experience some wobble
Personally, if I am shooting moving subjects, Id prefer ballheads. As they are much simpler to use. If it was a still subject, then Id go for a pan head as it offers finer levels of adjustments compared to ballheads. Hope this helps.
You need something thats easy to move when shooting birds. And since you dont need fine adjustments for landscape photography, for me, ballhead makes more sense. HTH
I compared it with my other tripod, the Manfrotto Be Free Advance. The Andoer Q160SA is shorter by about 1 foot compared to the Manfrotto. But Since the Andoer is shorter, it means it folds to a more compact size.
The center column of this model cannot be positioned horizontally. Hence, its limited when doing flat lay photography. You can either get the Andoer Q160HA or TTT-004. Both of those are capable of positioning the center column horizontally. Hope this helps.
Yes the ballhead is changeable. Do note however that the screw for the included ballhead is just a regular screw. Depending on the ballhead you want to install, you might need a countersunck screw.
Yes both are removable. For the ballhead, the screw is 1/4 in size. You might need a thread adapter if you want to use a different ballhead. As for the clamp, the included screw for the clamp is of regular shape. You might need a countersunk screw when installing another clamp to have that flush flat surface
@@TechNoobies thanks for the information and tips! Someone from Andoer flagship store on Lazada said that the ball head is not removable and I’m glad to know that it is.
Very nice review. Direct to the point. No fillers, no useless stuff or other nonsense. Very informative. I wish there are more reviews like this. Thanks a lot.
Thank you for the kind words!
Thank you for the honest review. Much appreciated! 👊
Thanks man!
Ikaw pala Yan boss don hahaha ayos👍👍👍 tamang - tama naghahanap ako ng budget but quality tripod, nabibigatan ako sa velbon ko hehe.
Arman.
Salamat papi!
Useful review. Thank you. Would it be possible to tell me how much this weighs exactly? I’m looking to get this for backpacking and weight is important
Weight is around 1084g with max load limit of 8kg
Thank you for review!
Thanks!
Great review! I'm thinking of getting this for my telescope, would this be able to hold it with the weight being unbalanced? And can you make precise adjustments with it?
It could, but it depends on how long the other end is from the center. As for adjustments, you can do fine adjustments,but dont expect it to be very precise
@@TechNoobies Thanks!
excellent review my friend. you need more subs!
Glad you liked it. Thabks man. Appreciate your kind words and support!
Thanks for review. What tripod u think will be good for 1,8 kg (camera+lens)
Thanks! Yiu can check out Andoer Q160H. It has 5kg load capacity and is horizontal mount capable. Or you can check Manfrotto Be Free Advance, a bit pricey, but worth it. This is what Im currently using.
Thanks for the honest review!
Thanks!
Thanks, you did a nice honest review...
Thanks man!
dude very well reviewed subscribed
Thanka man! Appreciate the support!
Nice review, Sir!
Thanks madam. Glad you liked it!
@@TechNoobies Thanks to you I was able to find a good tripod within breaking the bank. I love how light but stable andoer tripods are!
Sa tingin mo sir kaya ba and nikon d7200 with 18 to 140mm kitlens? Thanks
Total weight nyan sir is 1.255kg, max load capicity is 8kg per specs. Kaya naman yan. Pero just to be sure, you might need to hook some weights para mas stable
Is the body made of metal? Like aluminum?
Its made od plastic. For this price, its hard to complain though
Thanks
Thx
Thanks man!
Great video. But do lower the background music volume.
Sorry for that. I did a bit of experiment in this video, audio ducking on DaVinci Resolve.
I can see there's quite a bit of woble with the center column extended. Would you trust it for longer exposure shots in any configuration, like over 3 seconds? I am using Fujifilm X-S10 with lenses that do not go above 500 grams of weight each. Thank you very much for the review!
For configurations that has room for weights to be attached at the center column hook, its stable enough for 3secs exposure shots. But for configurations where the feet are wide apart and the center column fully extended, adding weights could be impossible, hence you may still experience some wobble
@@TechNoobies Thank you for the reply. Much appreciated!
Very detailed review..
Thanks man!
can this tripod use for rifle? thanks!
I suggest a rifle specific tripod to be safe
Dear,
Ball head or pan head with handel which will be best for photographs, need easy to setup. So which one?
Personally, if I am shooting moving subjects, Id prefer ballheads. As they are much simpler to use. If it was a still subject, then Id go for a pan head as it offers finer levels of adjustments compared to ballheads. Hope this helps.
@@TechNoobies thank u so much. I shoot Landscape and bird.
So which one dear?
You need something thats easy to move when shooting birds. And since you dont need fine adjustments for landscape photography, for me, ballhead makes more sense. HTH
@@TechNoobies ok. Thanks a lot.... 🙂🙂🙂
@@anikbasak4558 no problem. Happy Shooting!
What would be the weight on this Andoer Tripod??
Weight is around 1084g. Max load is around 8kg. Hope this helps.
@@TechNoobies Thank You, on your prompt respond..
@@TechNoobies Hows the panning motion for video recording, is it smooth or a little jerky??.. Thank You
@@ryanking5694 im using sony a6400 + 18-105 f4 lens, and so far the panning is quite smooth. Tbh, its better than I expected for its price
@@TechNoobies Great.. More importantly, is fluid.. Wonder, would it be a challenge, because there’s no handle on it, wouldn’t that be a hassle??..
Sirve para grabar videos? No veo la palanca
removable po ba yung ballhead niyan?
Yes
Do you still recommend it? In my country Malaysia it's on sale for around 15USD.
Yes. For that price, its a great deal!
it can use for Telescope? about 3 kilos
It should be able to support that weight
Hi i didnt get the part of tripod stand which one is taller in the video? Thanks.
I compared it with my other tripod, the Manfrotto Be Free Advance. The Andoer Q160SA is shorter by about 1 foot compared to the Manfrotto. But Since the Andoer is shorter, it means it folds to a more compact size.
Can you replace the ballhead on the tripod?
Yes you can. Thanks man!
is this good for flat lay photography and for cooking videos?
The center column of this model cannot be positioned horizontally. Hence, its limited when doing flat lay photography. You can either get the Andoer Q160HA or TTT-004. Both of those are capable of positioning the center column horizontally. Hope this helps.
Dear, can i change the head of this tripod? Or its fixed?
Yes the ballhead is changeable. Do note however that the screw for the included ballhead is just a regular screw. Depending on the ballhead you want to install, you might need a countersunck screw.
Are the ball head and quick release clamp removable?
Yes both are removable. For the ballhead, the screw is 1/4 in size. You might need a thread adapter if you want to use a different ballhead. As for the clamp, the included screw for the clamp is of regular shape. You might need a countersunk screw when installing another clamp to have that flush flat surface
@@TechNoobies thanks for the information and tips! Someone from Andoer flagship store on Lazada said that the ball head is not removable and I’m glad to know that it is.
How long is it?
Fully extended its around 122cm. Fully closed its 44cm. Hope this helps
@@TechNoobies too small size. Is it perfect for 5.9 inc person?
Im around 5'10" its ok so far. But this is not my main tripod.
@@TechNoobies ok. Whats your main one? And how long is that
@@anikbasak4558 my main tripod is the Manfrotto Be Free Advance, which is what I compared this tripod in the video. It max height is 59.1inches
would bear 5 kilos?
It would.
can you remove the ballhead?
Yes, its removable and replaceable