It's guys like you,who have done this for years,that are the best to learn from! You actually show how to do things with a"budget" amount of tools,and how to take your time and think it through! I'm a big fan!
I am a little more aged, but I find the term "tradesman" and "tradecraft" are loosely used for anyone these days. Fitzee is a real old school craftsman who thoroughly deserves the title. A real pleasure to watch something this complex come together. You do not teach this stuff in any school, it takes sound trade practices and experience. Keep em coming.
WOW!! Thank you for not leaving all your thoughts and musings on the "cutting room floor" - it is very interesting and helpful to hear your thought process as you work your way through this! An excellent tutorial - thank you!
Suspect that's the secret of learning from Fitzee. The thought process is the important part. I was going to say there is nothing flash about the welding for instance, but actually there is, the skipping back and forth and cooling is extremely important, even if the end result looks a bit rough before grinding, that process he uses makes a huge difference compared to the so called better looking welds that many of us were trying to achieve. The grinding, main thing required is patience and doing it in the right order so you can get at it. So once again the thought process and planning is actually the difference between Fitzee and what a lot of us accomplish. Those musing are invaluable!
Crazy you post a video on fixing a fender on a (relatively) late model vw. It was your welding videos that gave me the confidence to cut up a rust-free jetta in a junkyard to patch up a *decent* northeastern one I got for a steal.
For anyone taking sick pleasure in seeing a cut-up vw, you can look at photos of the parts car at row52. U pull & pay Denver. 2002 Jetta 3vwsk69m62m096225. I posted photos in the comments after surgery.
Tony there is GOLD in this video. I mean there is gold in every one of your videos but that "Gap Be Gone" Welding Hanger is the best thing I have seen in a while!! Not only that it is comedy gold as well.
I really appreciate how you repeat the process a bunch of times throughout the video. It helps me to get what is being taught ingrained in my thought process. Just watching a video or two is not enough to actually know what you are doing and much less repeat the process. Thank you. This VW fender is one that many "pros" would have deemed scrap. I await your next video.
By the way you are not just human, every video you produce makes us realize how much better than us mere humans you are. Thanks again for another great lesson. I always am waiting for your new ones.
That one would have driven me mad a few years ago. Even when it looked like it was right and ready to go, it wasn't and needing adjustments here and adjustments there and redoing things..... Sage advice about putting the tools down and walking away. I learned that one the hard way and that a temper tantrum only makes a bigger mess to fix....or ruins something to the point where you cannot use it at all. Funny how the perspective changes as one gets older, isn't it? Some days it all flows well and some days you're better off just mowing the lawns or trimming the trees.....or sitting down watching a favourite CZcams channel! It was a mission but you got it done. Great finish on the panel as always....and many thanks for the tips on them tricky bits.
Fitzee, thank you for all your videos! I just made the move to start a fabrication shop and work for myself. I watch your videos to get a different perspective on stuff I'm working on. I find the best advise , besides the technical information, is that you constantly remind us to not get worried/overwhelmed and to take your time. As you say, it will all work out! I learn alot from your content so please keep it coming! Thanks for sharing your wisdom.
Boy! If anything I’ve learned from this video is that you have made it clear that I need to slowdown, and realize that I need to understand that using coat hanger is not a sign of defeat but a tool to make sheet metal complement the error I make. This video has made me reassess my approach to sheet metal repairs. Thank you!
Nothing Fancy except the finished panel. I don't get anything done when a new video comes out but I later get things done faster cause the tips were so good. + I'm learning a new lingo.
I can see why you are always “up to your eyeballs” with projects… your attention to detail is second to none…. Once again a masterclass in metalwork….👏👏👏👏… Well done sir!!!
Tips were GREAT, Bob is my uncle, and now getting ready to roll the dentside F100 into the garage and work on replacing the bad windshield/roof/pinchweld areas. All thanks to you Sir!!!
man was worried how i was going to do a repair on part of my restoration project this showed me just exactly what i needed to know perfect timing on this lesson keep them coming cant get enough of your videos captures my complete attention and that is hard to do
Amazing work as always. You remind me of the late Bob Ross but working in metal instead. Very peaceful and calm in your approach to solving problems. You showing your mistakes and then fixing them gives us all hope for our projects. Thanks again!
You make it look so easy to do, love the tip on using coat hangers with the mig,dad taught me how to use torches and weld with coat hangers in the late 70s,well done ✔
I’m just getting into metal fabrication and you are the best I’ve seen at the craft of doing it and documenting it in such a non-intimidating, matter-of-fact way. In this video you have unlocked some of the pieces of the puzzle on how to turn flat steel into useful 3-dimensional pieces. Now I’m getting excited for the next time I have to fabricate something. Thank you Fitzee!
It's so nice to see this type of metal work and patch panel repair!! Sometimes you feel like it all has to be made in 1 piece but great video and how to... And it's OK to make it out of more than 1 piece! It's pretty annoying when these guys say they're going to show you how to make a patch panel with a bunch of crazy angles and curves etc and yet make it all in 1 piece and of course flex on everyone saying it's that simple!
Fitzi- you're a Michaelangelo if he were Irish or Scot. I mean it- in the manual arts you'd be a celebrated sculptor- it takes a special intellect to make such things, and make it look so easy. There are many kinds of smarts and I ain't nowhere near Fitzi level smarts when it comes to fabrication. God bless you brother.
The tips were great. I was always a bit afraid of metalwork but now no more thanks to fitzee. Also great to not have to listen to stupid music instead we can hear the grinding and the scraping. We love it! Greetz from Merel and Peete from Holland.
Hey Big Dawg, I've been watching you for about a year without doing any of this but studying, that's how my brain works. I jumped into the fire by tackling a Karmann Ghia with rust in all the right places. Last night I made a corrugated panel by routering a round straight bead into a piece of plywood and finding a deep socket that matched. I was able to hammer it perfectly. I LUV the "Cut and But" Keep up the awesome work.
Fitzee, thanks for all of the good metal repairing ideas! I'm working on a 1956 Ford pickup and the previous owner used bondo for all of his repairs so it has been a lot of work removing bondo and creating metal pieces to replace the bad and rusted metal. Jim
Hallo Fitzee as always your tips craftmanship and explanation are fantastic.How you do wonders with a piece of metal and create a masterpiece out of nothing.Welding thin metal to a thicker one is a story on its own. Warping and burning holes can be very frastraying.Something that happens doesn't matter hoe slowly or carefull you are welding.Especialy when your finished panel ain't the exact shape that it was before it was welded. Once again i cant thank you enough for your tips that encourage me to tackle my own project.
Your tips was perfect, tried in on the frame rails on my project car, was so much easier then trying to bend a bigger piece of steel in to different shapes. I learned so much from your channel, keep up the awesome work. Cheers from Sweden :-)
I literally never comment on any videos but this one is absolutely amazing. This video literally gives me the confidence to tackle a little project just like this on my own. Thanks again.
Awesome work. Your experience is evident in the way you approach these curve ball problems with authority when they come at you. There are so many you tube channels where they post videos on a subject that you can actually tell the poster just learned what he's posting about from another channel, but he's trying to pass it off as something they are knowledgeable about, but don't really know much at all.
Thanks Fitzee for another great metal working class sir, when I watch your videos I feel as if I'm in a world class metal working school,👍 again Thank you sir!
Love this. I am a metal man..but not necessarily a sheet metal body man. My body guy referred me to your channel to pick up tips to fix my own body work (better). I got some rockers to repair this winter on my race car
🗣😨😨😨TEMPLATE!!!!!...The Sky is Falling..LORD TUNDERIN'☈ JES...!!!!☈ Well done again. I'm reading all the comments praising your superior wit, skill and intelligence. It's a good thing your such a humble soul. If you were anyone else, I'm positive that your head would swell so large you would never get back through your shop door. Thank you very much for keeping it real.
This is truly a gold mine of a channel. Perfect instruction for the diy'er with limited tools. As a previous bodyman and painter for 14 years (25 years ago) I'm learning a lot of new tricks and inspired to get working on a couple of my own projects that I've been procrastinating on.
I love your video's. This is how I learned metal work many years ago. This is also how I teach my son. Yeah we could bend it out of one piece and some stuff we do. But I find this way 9 times out of 10 its not only a better tighter sharper fit but less body work in the end.
Thank you sir for taking the time to make these fantastic videos because here in North Carolina we have guys who think they're the best but there definitely not, You have helped me to sharpen my skills your one hell of a great teacher thanks again.
Thank you for another excellent tutorial! I always look forward to your videos and of course to when the next one comes out.. My skills are far from what you do! Totally amazing work!!
Loosing our temper has the same effect as worrying. It doesn't improve the future it just ruins the present. We are all impressed with your patience, and it never ruins your day.
That was alot off work. I made a floor panel the other day and figured worst case it's a floor board and it will not be see anyhow. However, it was a very complex piece but after watching your videos of doing it one piece at a time. It turned out surprising well thanks to your videos. Great job as usual thank you for the inspiration. My car, I'm building is slowly coming along well now thanks to you. You are a great instructor.
So refreshing to see a proper used work shop with hand made "stuff" and not all new shiny gizmoes and whatsits (as adverts) all immaculate, within a brand new bling work shop , a proper tradesman, thanks for the advice Fitz its sure appreciated ,im 67 ,an old car guy with limited tackle at my disposition ,still learning all these different tricks . Cheers from France.
You never disappoint, Tony. Just phenomenal work and persistence. And just imagine, an Irishman with a temper... You'd never know it today. I was even thinking earlier in the vid, "I'll bet he doesn't have a single hole in his garage wall that got there from giving a wrench, pliers or a screwdriver 'flying lessons'". With age comes wisdom, grace and temperance. Thanks for the tips!
Old cars calm me down. I had a 68 javelin and at the time you couldn't buy nothing for it and I had no parts cars. I knew every time I lost my temper I was going do damage I can't reverse. Some lucky I never had a run of the mill car you can buy parts for. I would had it beat round! Hahaha
I stumbled apon your channel about a year ago. You the reason I got a mig welder and tackled some small body repairs. I watch your videos religiously and always learning. Thank you.
Well Fitzee I was out making a patch panel to keep the cold out of my old 87 crew cab GMC and found a spot in the door jam I couldn't ignore so I made a three piece patch to make the complex bends of the jam and welded it all up. Ground it out with a flap wheel and called it good enough. Then I made the corner patch for inside and welded it up. Then made extension for the rear seat to move it forward an inch or two so we have room for our speakers and some storage. Nothin fancy, just getting her done so we don't freeze this winter. Thanks for the videos and the words of wisdom.
I really appreciated watching you rebuild this fender! As a guy who has worked with metal and fabricated in the automotive field for the last 25 years, I will forever remain teachable as I learned a couple cool tricks from this video. Thank you! I cant help but think there is no way you could make money for all the time involved, and are doing this solely for the purpose of the video.
When I started watching Fitzee Bob wasn’t even a distant cousin. Now just applied color to my one year total restoration and Bob is my uncle. Thanks Fitzee.
Hello Hello from Victoria!!! I am so glad that I found your channel. Your work is awesome to share with us and I hope young guys or gals understand that everything can get fixed after a miscalculation. Keep up the great content my friend and I hope you stay happy and healthy every day.
You are a great teacher I have learned so much from you with just basic tools and still looks better than any professionals work with tools. Thank you so much for putting out this videos!!!
Holly sht! Gap-be-gone was a term i used 25 years ago when building industrial equipment. It was usually a piece of scrap, but I've also used bad arc rods (busted shielding). I taught that to the ol' skool that was teaching me. Thanks for the flashbacks.
Please give Fitzee the Nobel-price for metal-shaping. Amazing work...
The Nobel "Piece" Prize!
Nothing amazing, it's a common situation for a body builder.
@@user-bf2wg2ng3n not so common for the people watching or they wouldn't be watching.
@@user-bf2wg2ng3n you have to admit, He's Good at what he does. Send pictures of your work. I'd like to see what's happening in Russia.
The 'Magician of Metal'
You had me at "Template", and "Welding Hangers". "Gap Be Gone", LOL!
It's guys like you,who have done this for years,that are the best to learn from! You actually show how to do things with a"budget" amount of tools,and how to take your time and think it through! I'm a big fan!
Don't forget the cheapest tools - "Welding Hangers". Sir you are the BEST craftsman and trainer !!!!!
Well said !!!!
"Gonna Weldit up now and dare it is, all welded up, all grinded up, nothing special, I'm human". Fitz you're a metal God.
I am a little more aged, but I find the term "tradesman" and "tradecraft" are loosely used for anyone these days. Fitzee is a real old school craftsman who thoroughly deserves the title. A real pleasure to watch something this complex come together. You do not teach this stuff in any school, it takes sound trade practices and experience. Keep em coming.
I'm really bored, then a new fitzee video popped up. Good stuff
WOW!! Thank you for not leaving all your thoughts and musings on the "cutting room floor" - it is very interesting and helpful to hear your thought process as you work your way through this! An excellent tutorial - thank you!
Suspect that's the secret of learning from Fitzee. The thought process is the important part. I was going to say there is nothing flash about the welding for instance, but actually there is, the skipping back and forth and cooling is extremely important, even if the end result looks a bit rough before grinding, that process he uses makes a huge difference compared to the so called better looking welds that many of us were trying to achieve. The grinding, main thing required is patience and doing it in the right order so you can get at it. So once again the thought process and planning is actually the difference between Fitzee and what a lot of us accomplish. Those musing are invaluable!
The CZcams algorithm strikes again! How did I get here? I haven't any idea. Am I enjoying every minute of it? You better believe I am.
Crazy you post a video on fixing a fender on a (relatively) late model vw. It was your welding videos that gave me the confidence to cut up a rust-free jetta in a junkyard to patch up a *decent* northeastern one I got for a steal.
Best thing to do with a vw is to cut it up !
@@cinderswolfhound6874 watch it!
For anyone taking sick pleasure in seeing a cut-up vw, you can look at photos of the parts car at row52. U pull & pay Denver. 2002 Jetta 3vwsk69m62m096225. I posted photos in the comments after surgery.
Tony there is GOLD in this video. I mean there is gold in every one of your videos but that "Gap Be Gone" Welding Hanger is the best thing I have seen in a while!! Not only that it is comedy gold as well.
I really appreciate how you repeat the process a bunch of times throughout the video. It helps me to get what is being taught ingrained in my thought process. Just watching a video or two is not enough to actually know what you are doing and much less repeat the process. Thank you. This VW fender is one that many "pros" would have deemed scrap. I await your next video.
By the way you are not just human, every video you produce makes us realize how much better than us mere humans you are. Thanks again for another great lesson. I always am waiting for your new ones.
Momma always said that even the most complecated problem has a simple solution 👏👍
Gap-be-gone. Fitzee was on a right roll tonight;). Such a complicated piece, whew!
That one would have driven me mad a few years ago. Even when it looked like it was right and ready to go, it wasn't and needing adjustments here and adjustments there and redoing things..... Sage advice about putting the tools down and walking away. I learned that one the hard way and that a temper tantrum only makes a bigger mess to fix....or ruins something to the point where you cannot use it at all. Funny how the perspective changes as one gets older, isn't it? Some days it all flows well and some days you're better off just mowing the lawns or trimming the trees.....or sitting down watching a favourite CZcams channel! It was a mission but you got it done. Great finish on the panel as always....and many thanks for the tips on them tricky bits.
I've learned that lesson about 40 times now.
Fitzee, thank you for all your videos! I just made the move to start a fabrication shop and work for myself. I watch your videos to get a different perspective on stuff I'm working on. I find the best advise , besides the technical information, is that you constantly remind us to not get worried/overwhelmed and to take your time. As you say, it will all work out! I learn alot from your content so please keep it coming! Thanks for sharing your wisdom.
I love this guys attitude. Its like meditation and welding at the same time.
Boy! If anything I’ve learned from this video is that you have made it clear that I need to slowdown, and realize that I need to understand that using coat hanger is not a sign of defeat but a tool to make sheet metal complement the error I make. This video has made me reassess my approach to sheet metal repairs. Thank you!
I don't even have a car and love watching your videos!!!
Nothing Fancy except the finished panel. I don't get anything done when a new video comes out but I later get things done faster cause the tips were so good. + I'm learning a new lingo.
Being from NS, Newf accents almost sound normal to me now, but I always wonder what people from away think.
@@FixNewsPlease Extra friendly
Welding wizard with a great accent. Highly educational and entertaining.
Excellent, love the “cut an butt” makes the panel like new when you’ve finished
I love rewatching your videos. They reinforce my belief that I too can do that with patience.
Another beautiful job Fitzee!!! If close is good exact is better! Fitzee is a magician!!!!!!!!
I can see why you are always “up to your eyeballs” with projects… your attention to detail is second to none…. Once again a masterclass in metalwork….👏👏👏👏… Well done sir!!!
Amazing work and tips as always! Fitzee's is my favourite car resto channel without a doubt.
man you are good i'm just an old body filler guy watching this makes me want to change my ways
Tips were GREAT, Bob is my uncle, and now getting ready to roll the dentside F100 into the garage and work on replacing the bad windshield/roof/pinchweld areas. All thanks to you Sir!!!
Bob has never been my uncle.
I always thought 'Bob's your uncle' was a English saying, but obviously not. Great video as always.
marvelous simply marvelous. you make it look so easy, even when the little problems pop up
Amazing to watch, and learn, from to true metal craftsman, thank you for taking the time to show us a thing or two!
man was worried how i was going to do a repair on part of my restoration project this showed me just exactly what i needed to know perfect timing on this lesson keep them coming cant get enough of your videos captures my complete attention and that is hard to do
Amazing work as always. You remind me of the late Bob Ross but working in metal instead. Very peaceful and calm in your approach to solving problems. You showing your mistakes and then fixing them gives us all hope for our projects. Thanks again!
You make it look so easy to do, love the tip on using coat hangers with the mig,dad taught me how to use torches and weld with coat hangers in the late 70s,well done ✔
What a Craftsman, and Engineer, great show.
I’m just getting into metal fabrication and you are the best I’ve seen at the craft of doing it and documenting it in such a non-intimidating, matter-of-fact way. In this video you have unlocked some of the pieces of the puzzle on how to turn flat steel into useful 3-dimensional pieces.
Now I’m getting excited for the next time I have to fabricate something.
Thank you Fitzee!
Me too. Can’t wait for my car to rust!
It's so nice to see this type of metal work and patch panel repair!! Sometimes you feel like it all has to be made in 1 piece but great video and how to... And it's OK to make it out of more than 1 piece! It's pretty annoying when these guys say they're going to show you how to make a patch panel with a bunch of crazy angles and curves etc and yet make it all in 1 piece and of course flex on everyone saying it's that simple!
Fitzi- you're a Michaelangelo if he were Irish or Scot. I mean it- in the manual arts you'd be a celebrated sculptor- it takes a special intellect to make such things, and make it look so easy. There are many kinds of smarts and I ain't nowhere near Fitzi level smarts when it comes to fabrication. God bless you brother.
I’m amazed with your work. I look at it and think that’s not possible and you make it all look brand new
The tips were great. I was always a bit afraid of metalwork but now no more thanks to fitzee. Also great to not have to listen to stupid music instead we can hear the grinding and the scraping. We love it! Greetz from Merel and Peete from Holland.
Hey Big Dawg, I've been watching you for about a year without doing any of this but studying, that's how my brain works. I jumped into the fire by tackling a Karmann Ghia with rust in all the right places. Last night I made a corrugated panel by routering a round straight bead into a piece of plywood and finding a deep socket that matched. I was able to hammer it perfectly. I LUV the "Cut and But" Keep up the awesome work.
Hey Fitzee, I'm at your mercy...when you say "stick around!"...lol.
Fitzee, thanks for all of the good metal repairing ideas! I'm working on a 1956 Ford pickup and the previous owner used bondo for all of his repairs so it has been a lot of work removing bondo and creating metal pieces to replace the bad and rusted metal. Jim
Hallo Fitzee as always your tips craftmanship and explanation are fantastic.How you do wonders with a piece of metal and create a masterpiece out of nothing.Welding thin metal to a thicker one is a story on its own. Warping and burning holes can be very frastraying.Something that happens doesn't matter hoe slowly or carefull you are welding.Especialy when your finished panel ain't the exact shape that it was before it was welded. Once again i cant thank you enough for your tips that encourage me to tackle my own project.
Your tips was perfect, tried in on the frame rails on my project car, was so much easier then trying to bend a bigger piece of steel in to different shapes. I learned so much from your channel, keep up the awesome work. Cheers from Sweden :-)
I literally never comment on any videos but this one is absolutely amazing. This video literally gives me the confidence to tackle a little project just like this on my own. Thanks again.
Awesome work. Your experience is evident in the way you approach these curve ball problems with authority when they come at you. There are so many you tube channels where they post videos on a subject that you can actually tell the poster just learned what he's posting about from another channel, but he's trying to pass it off as something they are knowledgeable about, but don't really know much at all.
your temperament is inspiring, i watch you and vice grip garage because I'm amazed how calm you all can stay while facing new challenges
Worked 25 years in VW parts. That fender looks nicer then the new OE replacements!
Watching Tony work his magic on a panel like this makes me want to try to resurrect the old Camaro I have sitting on the hill.
If fitzee says use 18 guage, I'm using 18 guage! 🙌 As a person who wants to save a few hondas, this video is perfect for me.
Whenever I get stuck, or lacking motivation, I watch one of your videos and it inspires me to keep going, one section at a time. Many thanks Fitzee!!
Thanks Fitzee for another great metal working class sir, when I watch your videos I feel as if I'm in a world class metal working school,👍 again Thank you sir!
I thought I was watching the wrong channel when you pulled out a template!!
New T-shirt “Gap Begone” love it!!!
I normally dont write a review but after seeing this masterful work you did on this fender.awesome job great work 👍👍👍👍 thanks for sharing. great job…
Thanks for walking s through these complicated shapes and angles, and reminding us not to stress out. 😎
Love this. I am a metal man..but not necessarily a sheet metal body man. My body guy referred me to your channel to pick up tips to fix my own body work (better). I got some rockers to repair this winter on my race car
🗣😨😨😨TEMPLATE!!!!!...The Sky is Falling..LORD TUNDERIN'☈ JES...!!!!☈ Well done again. I'm reading all the comments praising your superior wit, skill and intelligence. It's a good thing your such a humble soul. If you were anyone else, I'm positive that your head would swell so large you would never get back through your shop door. Thank you very much for keeping it real.
Fritz you have no idea how much you have taught me,,l what you and I can do it as a fast learner with many classic cars to restore,, thanks buddy
This is truly a gold mine of a channel. Perfect instruction for the diy'er with limited tools. As a previous bodyman and painter for 14 years (25 years ago) I'm learning a lot of new tricks and inspired to get working on a couple of my own projects that I've been procrastinating on.
I always said you’re a artist, but your also a great teacher. I’ve learned so much. Thank you.
I love your video's. This is how I learned metal work many years ago. This is also how I teach my son. Yeah we could bend it out of one piece and some stuff we do. But I find this way 9 times out of 10 its not only a better tighter sharper fit but less body work in the end.
Thank you sir for taking the time to make these fantastic videos because here in North Carolina we have guys who think they're the best but there definitely not, You have helped me to sharpen my skills your one hell of a great teacher thanks again.
Thank you for another excellent tutorial! I always look forward to your videos and of course to when the next one comes out.. My skills are far from what you do! Totally amazing work!!
Loosing our temper has the same effect as worrying. It doesn't improve the future it just ruins the present. We are all impressed with your patience, and it never ruins your day.
Greetings from the UK Another master class in fabrication with basic tools thank you so much Mr Fitz I enjoy all your videos
"It's only metal", yes that's the truth, once again an amazing video. Thanks again Tony for your tips and tricks.
We need some video of your grinding. It is absolutely beautiful. That is your greatest skill. Please put it on full display.
Will do
Fantastic. I am learning a lot from you. I am so glad you decided to go live on CZcams making these videos
That was alot off work. I made a floor panel the other day and figured worst case it's a floor board and it will not be see anyhow. However, it was a very complex piece but after watching your videos of doing it one piece at a time. It turned out surprising well thanks to your videos. Great job as usual thank you for the inspiration. My car, I'm building is slowly coming along well now thanks to you. You are a great instructor.
If my good days go as smooth as your bad days I’ll consider it a step up! Great video again Tony!!
fitzee the best teacher I've come across his explanations of his work are great too bad I didn't discover him sooner
So refreshing to see a proper used work shop with hand made "stuff" and not all new shiny gizmoes and whatsits (as adverts) all immaculate, within a brand new bling work shop , a proper tradesman, thanks for the advice Fitz its sure appreciated ,im 67 ,an old car guy with limited tackle at my disposition ,still learning all these different tricks . Cheers from France.
Thanks for making my day once again Fitz.
There are teachers and, there are educators. You sir are an educator! Thank you for the education!
You never disappoint, Tony. Just phenomenal work and persistence. And just imagine, an Irishman with a temper... You'd never know it today. I was even thinking earlier in the vid, "I'll bet he doesn't have a single hole in his garage wall that got there from giving a wrench, pliers or a screwdriver 'flying lessons'". With age comes wisdom, grace and temperance. Thanks for the tips!
Old cars calm me down. I had a 68 javelin and at the time you couldn't buy nothing for it and I had no parts cars. I knew every time I lost my temper I was going do damage I can't reverse. Some lucky I never had a run of the mill car you can buy parts for. I would had it beat round! Hahaha
‘Flying lessons’……… love it!😂😂😂😂
I stumbled apon your channel about a year ago. You the reason I got a mig welder and tackled some small body repairs.
I watch your videos religiously and always learning.
Thank you.
Oh Fitzee, you've done it again! I really can't make any excuses for not working on my Mustang after watching this.
So good! A pleasure to watch and learn!
I love watching you work and learning along the way! 👍
Well Fitzee I was out making a patch panel to keep the cold out of my old 87 crew cab GMC and found a spot in the door jam I couldn't ignore so I made a three piece patch to make the complex bends of the jam and welded it all up. Ground it out with a flap wheel and called it good enough. Then I made the corner patch for inside and welded it up. Then made extension for the rear seat to move it forward an inch or two so we have room for our speakers and some storage. Nothin fancy, just getting her done so we don't freeze this winter.
Thanks for the videos and the words of wisdom.
Awesome work, love that you show us every step! Thank you!
Amazing work as always Fitzee. Well done!
I really appreciated watching you rebuild this fender! As a guy who has worked with metal and fabricated in the automotive field for the last 25 years, I will forever remain teachable as I learned a couple cool tricks from this video. Thank you! I cant help but think there is no way you could make money for all the time involved, and are doing this solely for the purpose of the video.
When I started watching Fitzee Bob wasn’t even a distant cousin. Now just applied color to my one year total restoration and Bob is my uncle. Thanks Fitzee.
Fitz you always make me smile 😊…. I love ❤️ your “ anti “ template humour !!….
Wow- another great lesson - thanks Fitzee.
Always informative, time flies watching your channel. Thanks Fitzee.
Another great lesson learned. Thank you professor!
Hello Hello from Victoria!!! I am so glad that I found your channel. Your work is awesome to share with us and I hope young guys or gals understand that everything can get fixed after a miscalculation. Keep up the great content my friend and I hope you stay happy and healthy every day.
That some amazing work right there. Thanks for the video.
You are a great teacher I have learned so much from you with just basic tools and still looks better than any professionals work with tools. Thank you so much for putting out this videos!!!
My new favorite channel. Thanks!
Holly sht! Gap-be-gone was a term i used 25 years ago when building industrial equipment. It was usually a piece of scrap, but I've also used bad arc rods (busted shielding). I taught that to the ol' skool that was teaching me. Thanks for the flashbacks.
Love fitzees videos always something new to see and learn
Coat Hanger? What a great tip! Thank you for the great content and ideas.
Fitzee’s, you are the best shop teacher I never had! Thank you for sharing your vast knowledge.
Great job as always, like watching your videos!
I just love the Canadian Tire hat. I want one
Absolutely genius! Amazing work.
Great job,I love watching you work and improvise.