smart water level sensor using shelly uni
Vložit
- čas přidán 13. 08. 2022
- A device for measuring the water level in the tank directly on the mobile phone by Shelly Uni
The best way to measure the water level in the tank is on the phone with the possibility of automating the pump based on this measurement and receiving direct alerts according to the water level on the phone work with home assistant
water level sensor
--------------------------------------------------
Fluid level sensor purchase link
s.click.aliexpress.com/e/_Dkg...
from amazon USA : amzn.to/3pCg2Tb
For High Temperature Liquid / Diesel / Dirty Water Sewage Level
s.click.aliexpress.com/e/_DDg...
---------------------------------------------------
Shelly Uni Or Shelly plus Uni
from shelly web : bit.ly/3XheP5w
from aliexpress : s.click.aliexpress.com/e/_Dn2...
from Amazon UK : amzn.to/3AlwNYE
from Amazon DE : amzn.to/3AnoVG0
---------------------------------------------------
Link for DC Adapter
from amazon USA : amzn.to/3QMqvHc
from aliexpress : s.click.aliexpress.com/e/_DlY...
--------------------------------------------------
Important note: If you purchase a wrong sensor with only two wires, the problem can be solved by purchasing this part
from amazon : amzn.to/3RiXzKi
from aliexpress : s.click.aliexpress.com/e/_DE3...
---------------------------------------------------
To support the channel : www.paypal.me/naelgh
The official email for this channel Wesmart4@outlook.com
----------------------------------------------------
As an Amazon Associate I earn from qualifying purchases
#shelly #waterlevelsensor #waterlevelcontroller - Věda a technologie
Fluid level sensor purchase link
s.click.aliexpress.com/e/_DkgA4zv
from amazon USA : amzn.to/3pCg2Tb
For High Temperature Liquid / Diesel / Dirty Water Sewage Level
s.click.aliexpress.com/e/_DDguI4N
---------------------------------------------------
shelly uni
from shelly web : bit.ly/3C7i1WS
from aliexpress : s.click.aliexpress.com/e/_Dn2NelD
from Amazon UK : amzn.to/3AlwNYE
from Amazon DE : amzn.to/3AnoVG0
great idea. Can you suggest how to connect to a Shelly Plus Add-On? Thank you
Thank you,
There is no difference
Need 12 volts power supply
+ to level sensor Red wire
- to level sensor GND and on Addon GND
White wire from level sensor to analog in on shelly Addon
But currently I prefer shelly plus uni
bit.ly/49fqy85
Did not like the robot voice, but otherwise a very good and informative video. Thanks!
My main channel WeSmart is in my original language which is Arabic
here it is a subchannel the videos are in English Using text to speech
You rock man, very well explained!
Thank you 👍
Hey, thank you very much vor detail wiring pics and explanation. I've bought the Range 0-2m and Output 0-5V linked from your description and bought Shelly uni plus. Could connect to shelly via the app, but there is no voltage (all the time 0.0v). I've double checked but your wiring with mine but didn't found the difference. So white from sensor to white of shelly (ANALOG IN), red with red (VAC1), and black and green (VAC2/GND) with blue from sensor. Any idea what I'm doing wrong? Is there any wiring difference with shelly uni and shelly uni plus?
You're welcome, my friend.
Yes, your wiring is correct. Did you activate the sensor on the Shelly UNI Plus? You need to do that with the Plus model by adding a peripheral.
Hello, thanks for your very relaxed explaination. It's very easy to follow ..... but i have a little problem. I have the exact same combination. But when i connect the green wire to the ground .... nothing will work. When i disconnect it the shelly led goes up again .... Do you have any idea what i am doing wrong? Thank you so much. Kind regards, Frank, France
Hello
Do the colors of the wires on the sensor the same colors as the video ??
Niceeeee
👍
Thanks for this. Seems your ali link also shows probe is a 2-wire one and not a 3-wire. Can you please confirm also from your end before I order? The 3rd (that looks like a wire) is not a wire but some hose for air vent if not mistaken? btw: what esp32 board would you buy today for this as an alternative to the shelly uni since i have esp integration setup on Homeassistant?
You're welcome
Buy from this link
s.click.aliexpress.com/e/_DkgA4zv
Choose any size suitable for you and then choose 0-5V
Don't worry about the pictures just choose from 0-5, volts there will be three wires for sure
Use the new version of Shelly Uni
Shelly plus uni
s.click.aliexpress.com/e/_oCF3Et4
Fully compatible with Home Assistant and many advantages
@@wesmart1Thanks. Why not the 0-10v for a 2m depth or best 0-5v?
@Omobilo You're welcome! There is no difference in terms of performance, only in the number that will appear during the tank filling stage depending on whether the level sensor output is 0-5 or 0-10.
@Omobilo You're welcome! There is no difference in terms of performance, only in the number that will appear during the tank filling stage depending on whether the level sensor output is 0-5 or 0-10.
Hello, I have same configuration but unfortunately the readings are not stable. I have a range between 0,07V and 0,28V without moving the sensor. It is necessary a stabilized power source? You use one in this example? Thank you.
Welcome
These changes are not significant if they are at a level higher than 1 volt
And the reasons are mostly the passage of wires with other electrical wires
Thank you, I have the exact same setup nut forgot to ground the sensor green wire but it seems to work fine. Is there an issue with that? Should I fix it? I have value flaunting a bit but not significantly.
You're welcome, Yes, that's right, don't modify anything.
This flaunting is considered normal, don't worry
Hello, thanks for sharing. I have bought the shelly unit and sensor before watching your video... and my water level sensor has only 2 wires (red and black) instead of the 3 like yours. Any idea about the cabling? Thanks in advance for your support.
Hello
You're welcome
You need to buy a piece to convert current to voltage
Like this
s.click.aliexpress.com/e/_DlE2JyD
Purchased sensor and it says it needs 24v DC power - what will happen if I use 24V AC as I seem to have plenty of spare AC power adaptors ?
The device will not work correctly with 24VAC
You can use 12vdc if 24vdc not available
Would this sensor work in Kerosene or bio-diesel.
There is another type dedicated for diesel
You can connect in the same way in the video
You should order 0-5 or 0-10 volt output
This is a link
s.click.aliexpress.com/e/_DnLNVX3