WHERE TO: sand and prepare marvel Legends action figure before painting it
Vložit
- čas přidán 7. 02. 2018
- Here is a quick rundown I was trying to put together too quickly and I was unable to properly execute the point clearly .. A where to sand on marvel legends Spider-Man action figures .. Making superior Spiderman and the spider ...Watch until the end for a sneak on painting web lines... Sorry for the "not so great video" thanks for watching.
- Jak na to + styl
Thank you for giving us your valuable time to teach us how to do this stuff. I don’t know what we would do w/o ya Poundz! God Bless 👍
this is my first day customizing and you are my teacher....just solved my joint paint rub problem...thanks man!
Great video.. love your work and your methods. I found these cool little abrasive sanding needle type things at my hobby store. They are really good for this type of project. They can be expensive but if you take a super fine grit model sand paper and clue it to tooth picks they do the same job.
Your tutorials are next level. Thank you for them
These HOW TO videos are great. Thank you.
Thanks dude this helped a lot, now I know where to sand and not just guess. I’m thinking of making a bullet point Spider-Man custom.
Great job so far 👍🏽
tjis helped me so much I painted the marvel legends retro wave cyclops to look like the giant size xmen he looks very good I painted him since the actual figure looks the same but is like 40 or something like that
Haha, that’s funny bc I’m currently doing the same thing after getting the Target Ex. Storm and Thunderbird. Great minds think alike!
Thanks for the vid Poundz. I found that clear nail polish, yes clear. Will strip paint very well without damaging the plastic. Nail polish remover can be a hassle unless diluted. Clear nail polish right out the bottle.... spread on, wipe off. Made my life a whole lot easier. Cheers.
The nail polish remover I use takes just 1 swipe of a Q-tip and the paint is gone
Thx
Poundz978 which nail polish do you use?
Love your work man. Excited too see the superior webbing full.
Have you thought of trying a super fine micro pen?
Amazing man good job
Thank you poundz this exactly what kind of content I'm looking for thank you man
Hope I can make more of these
Good tips. Superior Spidey looking 🔥
Thx sir, I appreciate that
Thank you so much, Poundz! Another excellent video to help us to try make a custom by ourselves. Thanks a lot!
I'll try more often to help you guys out
Oh, I'm looking forward for that! Thanks again!
I wanna see more! Lol I liked and sub.
I actually like the Spiderman without the lines for some reason. Your a skilled customizer Poundz!
Thank you very much
That is cool and dope
Flow at the end of the video is sick.
Great video. I finally started back up on my 2nd custom. Can you recommend any figures that have a harness that looks like suspenders that I could swipe for my custom? Or a figure or something to use that has somewhat softer plastic that I could make into suspenders? Thank you, and again, great video, very helpful.
Not too sure sorry
So clean!
Thank you
Some of the things I use are emery boards and hobby files. The files and boards are great for hitting the lower body and shoulders.
Thank you so much bro bro 💯💯💯💯
I subscribed only because of the song lol and plus his vids are dope and inspiring
Thanks for coming by and subbing!
Your videos helped me alot I didn't even know I had to sand it
Sanding is the most important part, paint won’t stay in the joints if you don’t make room for it.
@@Poundz978 question what type of sealer do you use
And what happens if I don't sand like the chest will the paint rub off or stay
Thank you very much. This is great I didn't realize to trim the edges like that. That is so helpful.
Yes that helps a lot
Hey, what numbers should we have for the grit and fine sand paper?
Demnnn this will be my 1st proj. Wish me luck
Awesome
Great vid Poundz! Do you crack your figs open to do the sanding or keep them one piece?
Yo I hate to bother you with more questions but I figured if anyone knew the answer it would be you.
I'm making my first attempted on doing a custom Speed ball figure and was wondering if you can recommend me some paints and possibly some hints or suggestions on how to get the best looking design
Great tutorials really wanna get into customizing one of these days so your videos help a lot on understanding that and keep up the good work too :)
Could you please make an Ultimate spiderman black suit but with the peter parker body and thanks for the tips they are very very helpful
Damn my man starts the intro right off on a custom fig I wanna make lol
Learning from the master. I would have liked to see you actually sand it to see how you do it.
I made a custom Nitro the shoulders always rub the paint off I wish I had sanded it first.
How did you do the fire effects in the begining
O your great at fixing figures so i need your help. I have the new version of symbiote spiderman(kingpin wave) and his arm broke. I tried to get the arm out of the butterfly joint. I took a break from it so my brother tried used A DRILL! and he left a mark. And his symbol was messed up so how do i get rid of the mark and what paint do i use to repaint it. Thank you
This was helpful man. Thanks for doin this!
RoboToast glad this helps
Bro what do u use to seal your figures with
Should you disassemble the fig to get better access to the areas that need sanded
What type of sandpaper do you use?
i know you're probably super busy and don't have much time to respond to comments but I wanna say thanks for all the tips you given it really helps. BUT - when breaking down figures, sanding and panting. how do you get the figures re-assembled without the heat thats needed to reapply joints not messing up with the paint?
Hairdryer - heat up the holes in the legs and arms and attach … there should be no paint chip if done correctly
Thanks for ideas
No thx for watching
Poundz978 sheck out my new video and like it if you liked my 2 stop motion
Bro I liked off the intro alone #hiphop
What type of blue did you use
Sorry to ask this, what paint do you use?
This may sound stupid what do I sand it with? Sand paper?
What sand paper do you use?
Thanks man.. helped.. in the elbows and knees and ankles.. do you take them completely apart or sand when they are together
Joseph Rollins I take apart arms,hands, feet,lower legs, upper thighs,
I also remove pins on arms and legs depending on the color needed.
I never take a torso apart or remove the upper torso with another lower torso
@poundz978 just the hands and feet not the pegs that are in them right?
I really recommend u should try doppleganger just sculpt head hands and feet and drill holes that are the size of the shoulder peg like Life with Brock did
What type of sand paper do you use
Nice man! Question though, what tipe of paint did you use? I tried using enamel paint on a startlord heads one, not long after it went really sticky.
SamZ3X czcams.com/video/aTC9N3njqAI/video.html
Never use enamel, NEVER!
SamZ3X or.....7:37
This is awesome! Thanks man!
Thx man
What paint do you use :)?
Love your channel man. Thanks for all the tips
o great job sanding ! Lol you mentioned the eyes needing to be darker right when I commented about it before
Perfect timing
Or I read your mind
Poundz978 haha you a mind reader poundz
I really love a Spidey without the webbing!
Hello Poundz978, I have a question for you. What type of sandpaper is best for sanding down joints to prep for a figure repaint? I ask because about a week ago I finally got my TASM 2 Marvel Legends figure & I wish to repaint it to be movie accurate, since the default colors are way off.
150-220 grit
@@Poundz978 Thank you. Any chance this is sold on Amazon for a affordable price?
Do you know how to effectively cover up the peg holes? Like the pins where the elbows are
Sculpt (aves apoxie)
Thanks for this! Been waiting for it!
Hope it helps
what spidy head is that?
Do you have to sand if you're using a light coat of primer? I could see still doing the shoulders and other rub areas.
Yes ... Whatever joint your adding paint to needs to be sanded down .. Even primer adds a layer on
Thanks for the tutorial. Trying to use this method but having a hard time separating my figures. What's your method you use? Can you put up a video about getting the shoulders and torso apart?
Love your videos !
Thk u very much
Very good review! Do you apply any type of sealer on the figure after painting to avoid it from chipping off?
yes.
Omg thank you so much I've been doing everything wrong I'm so grateful
Hope this helps s bit
Bro i know i just ask you this question last week,thanks for making a video for Demo
Thank you!!! Good teaching!!
Thank you glad you think so
what do you use to sand them down are you using a dremel or just paper
Both
Poundz978 what grit sand paper do you use
do you have to sand your figure down????
Do I use a tool
I just don't get how you are able to sand down stuff like the elbow joints the fit is so tight there is no paint fitting in between there that won't rub for me.
can you make a custom mafex spiderman please 😇😇😇
The tutorial was great
Thank u
Can i have a custom done please
Will it be possible for you to make a video like this for the female marvel legends someday?
Yes I can
Thanks I just need the supplies
Best line work i have ever seen. Hey Poundz, do you have a video of you actually doing sanding? What sanding equipment do uou use? Do you use a sanding bit on a Dremel? Thx as always!
Thanks pounds I always try to do customs but their not that good. This really did help
Glad I could help, you'll get it soon enough
Hey man! What sand paper grits do you use? I’m curious and just getting into customs
First
SPIDEY PRIME PLAYZ 217 🏆
Poundz978 thanks BTW i love your MCU custom iron spider and your PS4 insomniac spider man they are my favorite customs from you
How to paint the cod wedding
Make a Spider-Nam custom
Now make video on how to sand
Have you ever preped a Legends Nightcrawler?
Yes
czcams.com/video/fTMv9W6vZ0Y/video.html
Do you buy bootleg moulds
Spider Island Studios never
Wow
You must pay a lot for customs
Making
Spider Island Studios I buy doubles and triples of most Spider-Man figs... I also buy heads casts from people and use other marvel legends bodies
hola
I'd love to see this for a female figure
I just hate how the arms always flare out and don't hug close to the body's on legend figures especially on spiderman body style figures
I’m just starting off with customizing. I would like to see how you sand the figures. I cannot find anywhere how to sand a superior octopus figure. Pls help
Where do you get all your figures from
The store
That's good. In Sweden we can't find any. I need superior Spider-man for my custom build.
Zx😀✌🏽️✌🏽✌🏽✌🏽😀😀
Big boy toys Big boy 😊
So wherever I'm going to paint I need to sand?
I want that pizza spiderman body with the mar6 Jane so bad
So a female Marvel legends would be easier to start with, since it doesn't have the waist joint, so that's one less joint to sand
Sybato maybe a Bucky cap body is the easiest to work on.
A female is as easy... but requires different prep
Someone please answer this but HOW DO YOU SAND!!!!!!!
With sand paper and your hand or a dremel
Poundz978 oh alright I'm lucky I got the sandpaper