BRACE1 Performance Engine Strut Brace + Custom Painted By Fearon Group

Sdílet
Vložit
  • čas přidán 6. 09. 2024
  • 2018-2021 Honda Accord BRACE1 PERFORMANCE Strut Brace Aluminum Tower Bar
    Torque Specs: 44ft lbs for the strut screws on bracket.
    Use BOOSTEDWHIPZ discount code for any of these models under Brace1 Performance:
    www.brace1perf...
    Use STRUT 15 for just strut brace or STRUT40 for full kit at XGEN AUTO:
    xgenauto.com/c...
    Follow Fearon Group (Shop for Body Shop work) and xgnofearz (Paul for the X-Gen Accord 2.0 Build) on Instagram:
    ...
    ...
    BRACE1 PERFORMANCE Braces play a crucial role in tying together points of the vehicle's strut tower in order to reduce unwanted chassis deviation caused created by dynamic driving forces. In doing so, vehicle response and feel is enhanced further as the forces absorbed by the chassis will be further reduced allowing the suspension to perform it's intended tasks.Made of lightweight reinforced aluminum which is painted to protect against corrosion. brace1 performance products are protected with a 1-year warranty against manufacturer defects.
    •Material: Aluminum
    •100% Authentic Brace1 Performance
    •Enhances Steering Response and Stability
    •Increases Stiffness and Reduces Body Rolling during Corning
    •One-Piece Race Spec Strut Tower Bar constructed of strong Aluminum to extremely tight tolerances and then polished to perfection.
    •Direct Bolt-On Design, Improving Ease of Installation
    IMPORTANT: The content of this video is only for informational/illustrational purposes. This does not guarantee the proper installation steps and only shows the steps we (Channel and Affiliated Companies) used to do it. We (Channel and Affiliated Companies) are not responsible for any damages or issues caused by following the guide in this video. Subscribers, users, and followers take full responsibility. Subscribers, users, and followers assume all risks in the event anything happens. We (Channel and Affiliated Companies) are not responsible for any damages caused by aftermarket parts and always recommend going to a professional specialized in said part.

Komentáře • 106

  • @jeromewhite4009
    @jeromewhite4009 Před 3 lety +4

    Ordered the Brace1 strut brace. Can't wait to install and see how the handling improves. Getting new rims, tires and coilovers soon. Can't wait to hit the open road.

    • @seanpingol9885
      @seanpingol9885 Před 6 měsíci

      how was it? was it touching the hood when u close it?

  • @koredragon2833
    @koredragon2833 Před 6 měsíci

    Amazing builds and paint jobs

  • @CrankyNurse16
    @CrankyNurse16 Před 3 lety +1

    Love the paint 🎨 looks so clean 🧼

  • @tumiami2074
    @tumiami2074 Před rokem

    Bro where did you get the blue Engine cover?

    • @BoostedWhipz
      @BoostedWhipz  Před rokem

      It's wrapped but the original cover I got it here.
      Use AEM-BOOSTEDWHIPZ discount code.
      www.aemtuners.com/shop/2018-22-honda-accord-engine-cover/

  • @CrankyNurse16
    @CrankyNurse16 Před 3 lety +1

    Thank you 🙏 you answered my questions about the alignment 🙌

  • @seanpingol9885
    @seanpingol9885 Před 6 měsíci

    does the strut bar touching the hood when u close it?

  • @artofinvading
    @artofinvading Před 3 lety

    thank you and great video, bud and your whip is looking sharp! just ordered and installed my brace1 strut bar in my 2.0 today thanks to all this. need to do some late night road testing tonight!

  • @armandomarin3684
    @armandomarin3684 Před 3 lety

    Se mira mucho más mejor tu carro con esos rines lo as arreglado bien chingon

  • @jit4075
    @jit4075 Před 4 měsíci

    How much did it improve handling?

    • @BoostedWhipz
      @BoostedWhipz  Před 3 měsíci

      Better cornering and tightens a bit more of the suspension

  • @elitorres9278
    @elitorres9278 Před rokem

    What does the engine strut brace do for the car ? Does this stop vibrating or is this just for handling?

  • @tumiami2074
    @tumiami2074 Před rokem

    Bro i have 2020 honda accord 1.5T, is this the right strut bar for my car?

    • @BoostedWhipz
      @BoostedWhipz  Před rokem

      Yes mine is a 1.5T 2018. Link and discount code in description.

  • @stefanbennett8480
    @stefanbennett8480 Před 2 lety

    Is it faster than the type R?

  • @calinikka4life
    @calinikka4life Před 3 lety

    You guys making me wanna go to the dealer and transfer my lease to a finance. 😍

    • @ImNotMC
      @ImNotMC Před 3 lety

      Why? I lease all my cars and mod them the next day!

  • @fred_b_360
    @fred_b_360 Před 3 lety

    Awesome vid🔥🔥🔥 Absolutely agree Xgenofears whip🤙🏾

  • @illwill610
    @illwill610 Před 3 lety

    OMG!!! Is that THEEEEE XgnoFearz!? Who's the other guy talking tho!? 😂🤣 Good stuff Frank!

  • @djsthemetereman
    @djsthemetereman Před 3 lety

    I tell ya man I have a few mods on my 18 aspec but I have a long way to go to get to your status. Great content keep it coming

  • @iliketakingshowers
    @iliketakingshowers Před 3 lety

    Boosted whips where ya at

  • @gosborne3248
    @gosborne3248 Před 3 lety

    2 Amazing platforms Great work Frank to you and your friends ride Beautiful is a understatement Have a great weekend

  • @BlackseedOriginals
    @BlackseedOriginals Před 3 lety

    Just subbed, great video

  • @aliveinlight6604
    @aliveinlight6604 Před 3 lety

    Looking snazzy dude.

  • @tatuado5875
    @tatuado5875 Před rokem

    Heydidyou also install rear lower strut bar if so what do you recommend 2018 10th gen

    • @BoostedWhipz
      @BoostedWhipz  Před rokem

      No I did not

    • @tatuado5875
      @tatuado5875 Před rokem

      @@BoostedWhipz You think if I order one of the eBay from ultra racing I believe it's 188 it's the rear lower 1 you think that's pretty good I got the brace 1 for the for the front because I've seen you had it and I went to that spot I just installed it like last week you could tell the difference on it when you're cornered and plus I drive-through the mountains all the time so I'll get pretty good handling I just wanted 1 for the back also

    • @BoostedWhipz
      @BoostedWhipz  Před rokem

      Should yeah.

  • @mrcrimefighter1
    @mrcrimefighter1 Před 2 lety

    Would I need a wheel alignment?

  • @ibewatching258
    @ibewatching258 Před 3 lety +1

    Do you know where he get his far side window

  • @justinhenry8713
    @justinhenry8713 Před 3 lety

    What or how do you keep clean the engine bay so clean??? Looks good man🔥

  • @brandons1067
    @brandons1067 Před 3 lety

    Nice!!!

  • @waynemcfarlane7244
    @waynemcfarlane7244 Před 3 lety

    Car is fire where are some of you guys getting the seats ?

    • @BoostedWhipz
      @BoostedWhipz  Před 3 lety +1

      Mine are from Braum Racing and I have discounts there. 10% off using BOOSTEDWHIPZ discount code.

    • @waynemcfarlane7244
      @waynemcfarlane7244 Před 3 lety

      Thanks bro ima check it out

  • @danielsantacruz5850
    @danielsantacruz5850 Před 3 lety

    Where do you get the purple shield around the hood ?

  • @jesseportillo324
    @jesseportillo324 Před 3 lety

    Awesome Build as usual - Great 📹 🎥...quick question is this strut bar the B1-100B, B1-200B, B1-200R, or B1-200s...?

    • @BoostedWhipz
      @BoostedWhipz  Před 3 lety +1

      200 series. The letter at the end defines color.

    • @jesseportillo324
      @jesseportillo324 Před 3 lety

      @@BoostedWhipz thanks for the information..much appreciated

  • @jasondiprosperis7239
    @jasondiprosperis7239 Před 3 lety

    I have a question? I have a 2019 sport like you but I was curious I wanted to change the sound was curious on what cool air intake you use and filter. Thanks

  • @giatayna2
    @giatayna2 Před 3 lety

    What kind is your front lip?
    Thanks for the update!👌🏻

    • @BoostedWhipz
      @BoostedWhipz  Před 3 lety +1

      V4 bumper kit from HiRev Sports. I did a couple videos on it. Please check it out.

  • @ibewatching258
    @ibewatching258 Před 3 lety

    Do you know where he get his steering wheel from I’m loving the flat body wheel

    • @BoostedWhipz
      @BoostedWhipz  Před 3 lety

      Steering wheel you can email me at boostedwhipzofficial@gmail.com

  • @juniorpalomo4927
    @juniorpalomo4927 Před 3 lety

    Hows the carbon spoiler holding up man

  • @ibewatching258
    @ibewatching258 Před 3 lety

    Do you know where he got his side vinyl from

  • @AC-vt4iw
    @AC-vt4iw Před 3 lety

    Planning on putting a carbon hood or trunk?

    • @BoostedWhipz
      @BoostedWhipz  Před 3 lety +1

      Near future yes.

    • @AC-vt4iw
      @AC-vt4iw Před 3 lety

      @@BoostedWhipz haha same here waiting for that tax refund lol

    • @BoostedWhipz
      @BoostedWhipz  Před 3 lety +1

      I just ordered 3pc wheels and working on doing a wrap. So hoods and trunk will be next after that. We'll see.

  • @jygogaming3550
    @jygogaming3550 Před 3 lety

    U think fk9 civic cusco strut bar fit this car?

  • @WeirdFlex
    @WeirdFlex Před 3 lety

    Have a link to that lip?

    • @BoostedWhipz
      @BoostedWhipz  Před 3 lety +1

      It's part of the body kit

    • @WeirdFlex
      @WeirdFlex Před 3 lety

      @@BoostedWhipz oh dang full kit..hmm. ill check it out!

  • @jeromewhite4009
    @jeromewhite4009 Před 3 lety

    Does the strut bar interfere with wheel alignment?

  • @agentfargo7640
    @agentfargo7640 Před 3 lety

    The BOOSTED40 discount doesn't work. Is there another one available for full kit and are u going to pick up the additional parts to install on ya whip?

  • @minassian56
    @minassian56 Před 3 lety

    Looks good... do you feel a difference in driving ?

    • @xgnofearzthe10thgenlegend82
      @xgnofearzthe10thgenlegend82 Před 3 lety

      Absolutely, steering is more responsive!

    • @WhataTofu
      @WhataTofu Před 2 lety

      @@xgnofearzthe10thgenlegend82 with your build what are you hitting on 0-60 and 1/4?

  • @markhaley44
    @markhaley44 Před 2 lety

    Thanks to you, I ordered mine this past week. Installed the bad boy in less than 15 minutes.

  • @joflow285
    @joflow285 Před 3 lety

    Does it make it harder to remove your catch can with the bar running across the top?

    • @BoostedWhipz
      @BoostedWhipz  Před 3 lety +1

      You unscrew the can from below so shouldn't be an issue.

  • @jaysonespinoza1487
    @jaysonespinoza1487 Před 3 lety

    Cvt ? Update

  • @stephaniedizon7663
    @stephaniedizon7663 Před 3 lety

    Bro whats that in the middle of the strut bar?

    • @BoostedWhipz
      @BoostedWhipz  Před 3 lety

      Not sure what you are referring to. Where exactly?

    • @fred_b_360
      @fred_b_360 Před 3 lety

      That’s the hat of the strut.

  • @learnyousome
    @learnyousome Před 3 lety

    Firee

  • @regmatt
    @regmatt Před 3 lety

    how’s the drive with the struts on ? is it stiff or the same

    • @BoostedWhipz
      @BoostedWhipz  Před 3 lety +1

      It's super good. You can feel the tightness but smoothness on turns and swerving.

  • @jeromewhite4009
    @jeromewhite4009 Před 3 lety

    I'm going to get the brace strut. Do I need the whole set or just the brace for under the hood?

    • @BoostedWhipz
      @BoostedWhipz  Před 3 lety +1

      Bruce under the hood is sufficient. Details in description on options and discount code.

    • @jeromewhite4009
      @jeromewhite4009 Před 3 lety

      @@BoostedWhipz thank you once again.

  • @whitetiger9907
    @whitetiger9907 Před 3 lety

    Yo , do you have a link for thè stripes on the side of your car , if you do let me know , thanks a lot bro

    • @BoostedWhipz
      @BoostedWhipz  Před 3 lety

      Check on IG for Oakman Designs Cars and mention me for a discount.

  • @AlexanderRodriguez-gp6zo

    Hey, man, I like everything you've done to your car. I'd like to know how to contact you to do a couple of things for my accord

  • @DrewTheEntertainer
    @DrewTheEntertainer Před 3 lety

    I don't think a teeny engine like that could be qualified as being called performance...brah....