How to test the washing machine twin tub motor ( spinner motor and washer)

this motors are faulty because they don't give me the proper reading... they were supposed to give me 3.3 OHM or above not continuity....
SPINNER NORMAL READING
BLUE + WHITE = 3.3 OHM OR ABOVE
BLACK + WHITE = 3.3 OHM OR ABOVE
BLUE + BLACK = 66.9 OHM READING
3.3 + 3.3 GIVES YOU =6.6 OHM that's how the metre counts on black and blue wire
Same on other side of washing machine the RED WIRE, YELLOW WIRE and WHITE WIRE you test the same and they must give you the OHM READING NOT CONTINUITY MUST BE A NUMBER!!!
THANKS FOR WATCHING
PLEASE SUBSCRIBE, LIKE, SHARE AND COMMENT
Andy's Appliances in George

[@issackaliaden9091]

The spin is which rotating one side and not the motor so correct yourself

[@kapunda6741]

Thank you Andy 😊

[@martygrande873]

danby twin tub only agitates one way but only moves an 1/8th they other way

[@IAMappliancesrepair]

1.Test the motor if you find reading on the 3 wires if there's no read on 1 wire then change motor,
2 check if the knob it's not burned inside and not broken/ burned wire
3 check the capacitor it's fine

[@issackaliaden9091]

The wash motor rotates both side but the spin motor rotates one side only. For your information.

[@IAMappliancesrepair]

Yes the spinner doesn't rotate other side only one side

[@NieghrierAjam]

Hi, I did the test as you showed for the spinner motor. Meter on continuate and test the colors. Positive on white black on blue then black, beeped on both. Then did the ohm test but got readings of 44 ohm... WWhat does this mean. You got 0 ohm.

[@IAMappliancesrepair]

When you get 0 ohm reading something it's shorted. Like when you the fuse with ohm you will get ohm or beep sound

[@omeshtewari2427]

Thank you for your help I need to know how can I. Connect the spin motor to a plug what are the colours to connect as I do not have a tester can u please advice love your advice help thank you

[@IAMappliancesrepair]

Hi… sorry for delay response, the are two wire that are connected to a capacitor and one it’s connected to a power and switch. Connect that 1 wire (power wire) with you plug and one wire from the plug and connect to the capacitor please be careful it’s dangerous this is high voltage

[@omeshtewari2427]

@@IAMappliancesrepair thank you my friend very much wil do appreciate your feedback 🤗👍

[@IAMappliancesrepair]

@@omeshtewari2427 you welcome 🙏🏾🙏🏾

[@user-eh2hu7ip9l]

Wire digram for the spincycle

[@IAMappliancesrepair]

There's no wire diagram at the back the machine?

[@sasasa4141]

شكرا لهذا التوضيح الرائع!!
لدي ماطور المجففه يخرج صوت
وبعد ان اخرجت السله والعازل اعلاه
ويدور بطيء
ما الحل؟
كذلك كيف نفحص المكثف
مع العلم ان ماطور الغساله يعمل 100٪؜
؟

[@mandla9267]

My front loader spins for a seconds and stop snd spins again

[@railiousgowaseb551]

So if it beeps its faulty

[@IAMappliancesrepair]

Hi, sorry for delay response, sometimes it’s beep when it bee the connection are attached but first check your switches turn one by one and place your multimeter probes the washer plug (N) and (L) you must find the reading or beep and it will and beep after sec will beep again the switch are fine and motor and double check the motor condition how it looks doe’s it spin freely