Laser Source Repair | Fiber Laser Cutting Machine 2kw

The video tells laser source repair, it is the laser source for fiber laser cutting machine 2kw. Although you could not find the guidance of repairing laser source, some small tips are here.
Our Store: spierlaser.com
View our product catalogue: drive.google.com/file/d/1qT5n...
[phone]
[e-mail]
Join this channel to get access to perks:
/ @clarachai
Hello, everyone, Clara here, today we will tell the things about laser source repair. It is not a guidance to show you how to repair lasers, but you could get some small tips here. If you are the first time meeting my channel, please don’t forget to subscribe to me and give me your like, thank you.
Last week, I received a laser from a Brazil customer. It is a 2kw, he said the laser is burnt and totally dead. Today, we are going to make a simple check.
First, we check the window lens, no spot is found, and there is no obvious burning inside laser. When we connect to monitor, it shows the machine has passed warranty. The total emission time of the laser is not long, only 2 months. After we power on the laser, no alarms are generated. So, we try to get laser emission, set the power to, first 50%, 70% and then 100%, still no alarms are generated. It seems like there is no problems to the laser. Therefore, our preliminary judgment is that the laser is good.
Here I would like to share several small tips on laser source.
1: If your laser is in warranty, don’t do repair by yourself, please ask your supplier to help you. Cause some suppliers will refuse to offer service if they find their lasers being checked by the third party.
2: Please do not jump to conclusions without professional engineers’ confirmation. It will lead to unnecessary expenses, like the freight.
3: It is better to store a backup laser for emergency replacement. Cause once the laser is damaged, it will take days, or even month to repair it. The backup laser could be second hand, the same power.
4: Routine maintenance is very important. For example, if you find that the perforation was not successful, you should stop and check the lenses immediately.
That is all our today, thank you, please leave comment below to let us know your thoughts, if still having time, click the following link to view our store and see what we could offer you, see you next Sunday, bye!

[@hashirebo1922]

hi what solvent you use to clean fiber laser

[@sohailzaman2876]

Dear Clara. one Indian fiber laser installer was calming that he can cut accrylic sheet 15mm on fiber laser, and plywood as well. how it possible

[@medjoui7600]

Hi clara
I have a question about new version of laser source max photonics MFSC-1500C it's us for cutting machine or for welding machine or it's also have two versions one for cutting and other for welding...
Thanks

[@ClaraChai]

I think they are different, at least from what I know.

[@yasinaksakal9573]

Merhaba,
6000 kw HSG lazer tezgahım var
Bu işte henüz yeniyiz
N2 ile keserken tüpler çok hızlı şekilde bitiyor ( aynı gün içerisinde )
4 mm kalınlığında parça kesiyorum
Bu normaldmidir ?

[@ClaraChai]

Hepsini alabileceğimden emin değilim, eğer yeni bir makine ise, tedarikçinize herhangi bir şüphenizi sormaya ne dersiniz? Bu en iyi yoldur.

[@SuzukiGsxr7500]

Selam. 4MM için hangi basınç kullanıyorsunuz? Bide N2 pahalıya gelir. Yüksek basınçlı hava kullana bilirsiniz. Pürüzlülüğü N2 kadar olamaya bilir ama tasarruf edersiniz. 6mm-a kadar havayla kese bilirsiniz.