2004-2016 Nissan Armada Starter replacement
Vložit
- čas přidán 4. 09. 2024
- This is a 2008 Nissan Armada Starter remove and install. This engine is similar with the Nissan Titan, so its basically the same procedure when replacing the starter on that car.
Tools:
amzn.to/3N6JIUe 25" 1/2 Flex Ratachet
amzn.to/3R4eCOw 3/8 Flex Ratchet
amzn.to/3sXBnLT 1/2 14mm deep socket
amzn.to/2awd6P5 3/8 10mm socket
amzn.to/2aCThW4 3/8 12mm socket
amzn.to/2awcY1Z 3/8 14mm socket
amzn.to/3RoiNpC 3/8 wobble extension set
amzn.to/2aweq4t needle nose Pliers set
amzn.to/2b3rDq8 Vice grip
amzn.to/2b5u8I2 Hose clamp tool
ttp://amzn.to/2bDluhn clip removal tool
amzn.to/2PsTmB6 Flat head screw driver
amzn.to/2aEVljA diagonal cutter
amzn.to/3N7Pllo Magnetic Pickup Tool
amzn.to/3N2ioqk Blue painters tape
Parts:
amzn.to/47Cdqc2 Nissan Armada Starter
amzn.to/47An5Qi Intake Manifold gasket
Torque specs:
7 ft. lbs. - Intake manifold bolts
34 ft. lbs. - 14mm Starter bolts
5 ft. lbs - Starter wire nut
5 ft. lbs - Evap bracket
5 ft. lbs - Negative battery terminal nut
5 ft. lbs - Engine cover bolts
5 ft. lbs - Transmission dipstick bracket
like and share this video!
Like us on Facebook
bit.ly/nutzabou...
and SUBSCRIBE!
bit.ly/NutzAbou...
Excellent video , I hav a 2005 Titan, sometimes it would click & then turn the key a second time & usually it started but I knew the brushes in the starter was wearing out . Tried to find out how much the starter would cost & found out the starter is installed under the plastic intake manifold . I definitely was not going to hit that with a hammer incase I got stuck . In the old days the starter was under the engine making it real easy to install & remove but not anymore . $388 not including the starter which was $175 for just the starter . $563 plus tax . Nissan engineers & designer's have really fixed it so to make it not simple . . .
Thanks for making this video! Helped me a ton to fix my '12 Armada. Really made an intimidating project seem easy. Took me about 3 1/2 hours. Those 2 starter bolts took longer to break free than taking off the entire intake! Thanks!
lol yeah, the starter bolts were tough, definitely need a breaker bar and a good angle.
@@NutzAboutBolts yep a swivel head, and 24" piece of black pipe was just enough leverage
Nissan engineers got the noble price for their ideas most probably their brain is up their @55 too 😅
Excellent video!
Thank you 👍🏼