Thank you! Although I drained and checked the cap deal, it still said SUD. I then unplugged my washer for about 30seconds, plugged it back in, and it worked! It finished the last minute of the cycle I had started and then I was able to rewash!
Awesome, and good morning. We are drinking our morning coffee and answering any and all questions for the DIY community. Let us know if you have any questions. Thanks for watching.
Been fighting with the machine for months. The dreaded SUDS error and didn’t want a repair guy in my house with Covid and all. Super easy fix, works great now. Thanks for sharing your vid! Guys like me who are too stubborn to read the manual need folks like u out there!
Dear Michael, THANK YOU! I had this issue for more than a month now and google told me that it's due to excess detergent. I went so low with my detergent and tried one load without detergent as well - but no luck. Just saw your video and opened that plastic lid and guess what. It had a mask in it. Well, thanks covid. Just started another load and came here to write a thank you note, hopefully this one's without SUD error,
thank you this fixed my issue! Previous owner clearly had dogs because the part that you pulled out on my machine was completely filled with dog hair. Cleaned it out and its running perfect now.
All those items can definitely cause a blockage. We appreciate you watching and reaching out to us David. Welcome to the DIY Raptor Club. Enjoy your day. 😎👍🔧🔩
Thank you so much for this! What an amazing and quick fix (I have been putting colour catchers in my washer which apparently are getting caught in the filter). I really appreciate this help!
Tara Robinson Thanks for watching & you are very welcome. Sounds like you’re back up & running. Let us know if you have any questions. Us fellow DIY’ers need to stick together! 😎👍🔧🔩
I found Dryer Sheets in my vent! This was so helpful, thanks man, I was starting to think I needed a new washer and was getting so upset, thankful I found this video!
Thanks for watching & sharing your experience. Sounds like you cleaned the filter & are back up and running. Hope all is well, enjoy your week David. 😎👍🔧🔩
OMG! You're brilliant! I've been on chat with an Samsung expert. She was no help and ended convo with " get a Repair person". I asked about the front drain area and she never responded! So glad you are a CZcams giver! BTW- Filled with dog hair, toothpicks, and labels!
Thanks for watching & sorry to hear you had a rough convo with support. We are so happy to help. Us DIY’ers need to stick together! Dog hair, toothpicks, & labels sound like the common items, welcome to the club...😁 Hopefully many stress free days ahead for you Patti. Enjoy your night. 😎👍🔧🔩
Thanks sooo much! My husband and I kept getting the SUD error. I was about to call someone to fix it. I watched your video and gave it a go. I found a dental tooth pick, 25 cents and a lot of animal hair. We have dogs and cats. lol And it smelled too. YUCK! WE have kids, dogs and cats! Thanks to you we are up and running again so far.
Thanks for watching & welcome to the DIY Raptor Club. Sounds like you’re back up and running. We appreciate you reaching out to us Katherine. Great job...& you’re $0.25 richer than you were prior. Enjoy your night. 😎👍🔧🔩
I was today years old when I found out that there is a drain hose. I’ve had my washer for 7 years and in the past I thought it was normal to clean out the filter and try to contain the rush of water. I had no idea there was an easier way 🤦🏼♀️
Thanks for watching & we appreciate you reaching out to us. It’s always fun leaning something new. Thanks for sharing this Jessica, hopefully many stress free days ahead for you! 😎👍🔧🔩
Thank you! This fixed my machine! I have a baby on the way and my machine not working was really stressing me out. I've never been so happy to hear the little song at the end of the cycle!
Awesome, and congrats on both the baby and the successful DIY project. It’s an incredible and rewarding feeling when accomplishing your projects and saving time in the process. Welcome to the DIY Raptor Club, enjoy your weekend. 😎👍
Thank you! Over 2 hours on the phone to Samsung, waitlist for a technician and all fixed instead with this video. I didn’t think to check the filter because we clean it monthly and it has been done only 2 loads previously. There was a baby sock rolled up and stuck in with the filter. It took some gentle pulling to get it out but we’re perfect once again
I can never fix anything on my own but your video worked! it was simple and easy to follow instructions and my SUDS error went away and washer is working! Am following you now! thank you!
Jamie, welcome to our DIY channel, we appreciate you reaching out to us. Awesome job making it a DIY project! We got your (Super Thanks) and that means the absolute world to us, no joke!!!! THANK YOU THANK YOU THANK YOU! We will always be here to help out as you work through projects, please never hesitate to reach out to us. We subscribed to your channel as well. 😎👍🧰
Thanks buddy! Just a heads up, like the video says, really be sure to turn it back in until you hear the double click sound or else the SUD error still shows. And also, I had to unplug and plug my machine back in after doing the awesome steps from the video to get the SUD error to disappear. So far so good!
Thanks for watching. Awesome job to you and your daughter for teaming up and fixing your machine, welcome to the DIY Raptor Club!!! Hopefully many stress free days ahead for you. 😎👍
Appreciate the video! I’ve followed the instructions for that drain every 2 months for 4 years now. Never found much. Guess I skipped a cycle…. Was clogged with pet hair!
Thanks for watching & we appreciate it, us fellow DIY’ers need to stick together! We actually just checked ours a few days ago. Checking on a regular basis drastically reduces the chances of a failed pump. 😎👍🔧🔩
Thanks for watching, that’s great to hear. We are hanging out today at the DIY Raptor headquarters watching football answering questions for our fellow DIY’ers. Hopefully many stress free days ahead for you. 😎👍🔧🔩
Good morning Lara, we appreciate you sharing this. That’s great to hear. Solving this problem for you without wasting any of your valuable time is our goal. We are drinking our morning coffee answering any and all questions for the DIY community. Let us know if we can help in any way. Hey also if you’re into crypto trading, join our newly launched DIY community ecosystem. Toolboxtoken.com We DIYers need to stick together! 🧰
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. You are very welcome, a successful DIY project puts you in a great mood. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem. toolboxtoken.com Reach out to us any time! 🧰
Hi. This video was extremely helpful! I did everything in the video along with removing and cleaning the soap dispenser and the area. Unplugged the washer for about two minutes and it’s working fine.
Savings a few hundred dollars is awesome! You can spend that money on something more meaningful. Let us know if you have any questions, enjoy your night. 😎👍🔧🔩
You just help me out so much thanks for this awesome video I have work tomorrow and had to get my clothes washed but the sud error was stooping the wash. 10 out of 10 will start telling my friends about you
Good morning & welcome to the DIY Raptor Club Brad. Great to hear we could help. Enjoy your day at work, hopefully many stress free days ahead for you. 😎👍🔧🔩
I bought the Samsung washer in July 2022 and we were getting g this error. Ran across your video due to the SUD error and we found dog hair, alcohol swab, a sticker and small pebbles 😪😭 THANK YOU !!!!
Awesome & a filter filled with junk will definitely do it. Great job making it a DIY project. Hopefully many stress free days ahead for you Helen. Welcome to the DIY Raptor Club. 😎👍🔧🔩
thanks so much, I expected it to be dirty and it is but couldn't believe it clogged too since my daughter's sock was in there too. no idea how it got in there. LOL, Thanks so much for the clip.
You are very welcome & welcome to the DIY Raptor Club. That’s great to hear. Us fellow DIY’ers need to stick together. Let us know if you have any questions. Enjoy your day. 😎👍🔧🔩
Francisco Sanchez Very cool. We are happy you’re back up & running & your DIY project didn’t cost you a thing. Let us know if you have any questions. Please subscribe to the channel and ring your CZcams bell 🔔 this will be very helpful to us thanks again. 😎👍🔧🔩
amagictouch Thanks for watching. We are here to help. We recommend cleaning it once every few months...or maybe once a month. 😀👍 Please subscribe to the channel and ring your CZcams bell 🔔 this will be very helpful to us thanks again. 😎👍🔧🔩
You are very welcome Dina, welcome to the DIY Raptor Club. You can put that money toward something more meaningful. Hopefully many stress free days ahead for you. 😎👍🔧🔩
As I found the panel ... with a sticker saying ‘remove and clean drain every two months’ I realized that in some aspects my husband and I aren’t star pupils at adulting... since we’ve had this machine for four years... and today we found this video... and our drain filter. Holy. Cow. Four years x two dogs x twins that were 4 year olds when we got the machine.... gross is an understatement. I had to bleach the drain plug itself to tame the odor!🤢 Thank you for the detailed guide, especially the ‘little tips’ like having the towel handy for very clogged filters and the need to be gentle with the tubing and plastic parts
Thanks for watching & welcome to the DIY Raptor Club. Sounds fun & the same thing happened to us years ago. We purchased a house & the washing machine was 4 years old...&...well...it kinda looked & smelled like it was never cleaned...not ever...🤣 We appreciate you reaching out to us. Enjoy your night Judith. 😎👍🔧🔩
Hey Kristen, we really enjoy making these tutorials. We DIYers need to stick together! 😎👍 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem. toolboxtoken.com Reach out to us any time! 🧰
Thanks for watching & sharing this. Glad to hear the video helped. Us fellow DIY’ers need to stick together! Hopefully many stress free days ahead for you, enjoy your day Angela. 😎👍🔧🔩
Thank you and I had this problem and after watching your video and it fixed. After draining all the water, I unplugged for about a minute and it perfectly worked out. Thank you so much
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. Awesome job making it a DIY project, no joke. Definitely helps pave the way for a more enjoyable weekend. 😁 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
Thanks for watching & we appreciate you reaching out to us. We are happy to hear the video helped. Let us know if you have any questions. Us fellow DIY’ers need to stick together! 😎👍🔧🔩
Thank you so much for this incredibly helpful video!!!! We have 3 animals so when we do laundry, it seems as though all the pet hair clogs up. I pulled out that filter and it was completely filled to the rim with animal hair, and misc things. The washing machine always smelled like urine and after draining the water from the tube it seems to be slowly going away - here’s hoping the laundry smells fresh once the cycle is done. Thank you again!
Good morning ☕️ Animal hair buildup will definitely do it. And that’s a great point…now that it is cleaned out…you may notice a fresher cleaner smell. 😁👍
Thanks for educating the community and appreciate your volunteering Thanks to team Could you please post some more videos with small small tip which any one could do without a mechanic
Thanks. This was a good help and fixed my problem. I would add to the removing the filter portion - I had to tug and wiggle it free from bound up hair - It is GROSS. It smells rancid and is filled with hair based sludge. I definitely earned a Klondike bar.
Thanks John, and your added advice is greatly appreciated. This project can definitely be a bit gross as you mentioned. 😎👍 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. Awesome job, you have officially earned your DIY badge! We really appreciate you taking the time to share this. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
Thanks! Just had the sud error and I drained the little hose. I knew the filter was ok I cleaned that last night. But today I cleaned the machine with a cleanser I should have did a plain water cycle afterwards
Thanks for watching & you are very welcome. Great to hear you’re back up and running. Cleaning system was a good idea, hopefully many stress free days ahead for you. 😎👍
I did three loads of cat beds after receiving my new washer and the sud code came on so beings I bought it specifically for my rescue I will check filter after every load or two. I knew when I saw the easily accessible filter on the front, I knew I better get it... But it's interesting how my old duet filter only needed cleaning about once a year! So this filter system must be more sensitive and probably catches more debris. Ill try it on the morning and how I fix it. Thank you for video because my manual booklet did not mention the drain connected to sud code.
Hey, your video has been SO useful! My family recently moved into a new house and the previous family left their washer and dryer. You've helped with the suds issue, but I can't pull out the filter 😭 It just keeps spinning. I saw a different comment about the same issue and read your reply, but that didn't work either. Any ideas? Oh, and did you mean to have a link under the #2 in your pinned comment? Because we had that issue. Except it would say Suds during the rinse part. I hope you're still an active channel! You've been a blessing to start with!
Thanks for watching, we have copied & pasted our comment from your other video request in hopes that it helps. 😎👍 Thanks for watching & welcome to the DIY Raptor Club. At this point you will need to replace your filter housing. This part connects to the Drain Pump motor/housing. This is a friendlier fix than you think. 😀👍 Below is a link to a video replacing a pump motor to a different washing machine however you will see the filter housing part as well. czcams.com/video/M2LltDIjNl0/video.html Please keep us posted. 😎👍🔧🔩
@@DIYwithMichaelBorders Update! Before we tried anything else we double checked the manual and missed a page about the filter! Turns out the child safety lock was on (which is both hilarious and humiliating) and my mom was able to get the filter out! 🙌🏻 That explains the spinning. Both my dad and I failed to get the filter out even with the idea to push in 💀 At least it was an easy fix. We would have had no idea where to start so once again, thank you!
@@ChicNuggetu OMG...😁...we appreciate you sharing your update. Great to hear you’re back up and running. Hopefully many stress free days ahead for you. 😎👍🔧🔩
@@ChicNuggetu help!! We also got this washer from buying a house and I think are having the same issue, only we don’t have the manual. Is the child safety lock when it spins and clicks? And you said pushing it in unlocks it? Because I’m trying that and it’s still not working! What page of the manual are you referencing? Thanks!!
@@skitzkit Yes! So sorry to get back to you late I got a new phone and I still have to turn on notifications for some apps. The child safety lock is when it spins and clicks! You do have to push it in and turn it counter clockwise in order to completely take it out. I don't know why but my dad and I struggled with that but my mom got it easy, so if you don't get it after five tries, KEEP TRYING! This is mentioned in page 52 of the Samsung Washer manual. :) (It mentions unplugging the power chord, but we didn't do that bc we can't reach it where the previous family placed it, it should be fine to do it without unplugging, just make sure the machine is off, and drain it with the little hose connected!)
Good morning, we are drinking our morning coffee answering any and all questions for the DIY community. Thats very kind of you to share, thanks for watching. 😎👍
Thanks! I have the same washer as you but I don’t have the bases for them. My drain is low to the floor so I got out as much water as I could in a bowl and then put the drain hose in a small plastic water bottle to drain the rest.
Good morning & thanks for watching Chelsea, we appreciate you reaching out to us. Sounds like your Mask will live to see another day. 😀 Hope all is well, let us know if you have any questions, enjoy your day. 😎👍🔧🔩
Thanks for the great video! I just found a mask in there also! After getting the SUD error over and over, we just kept pressing 'start' and the machine would attempt to finish the cycle. Eventually it would get there... Although this time, there was an almighty cracking sound, then dirty water spillled out from under the machine. Do you reckon it's ruined, or is there some sort of pressure relief valve for the drain pump which had simply released???
@@nathanlouey Thanks for watching & sharing your experience. It’s possible that the motor itself was overworked & has begun to leak. We recommend replacing pump & double checking the filter is clean & clear. Keep us posted, us fellow DIY’ers need to stick together. Enjoy your day Nathan. 😎👍🔧🔩
@@DIYwithMichaelBorders Thanks for the reply!! the machine finished it's spin cycle and pulled the water out fine, so I think the pump works OK? I tried to start a new cycle however and as soon as the machine started filling, water flowed into the floor... I guess I'll start pulling it apart to see where the water is leaking from
We are happy to help, and thank you. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
@@DisneyBirdLady Thanks for the follow up. Any update? The filter cap/plug itself should have a over-tight prevention design to it not allowing you to over-tighten or under-tighten it. Kinda similar to the your gas cap on your car.
@@DIYwithMichaelBorders we were able to get it on and it stopped pouring water it at first, but it's not leaking again, just not as much. ☹️ What could have happened?!?
Thank you so much for making this video I was able to fix my machine without calling for handyman. Found a lot of gunk in that filter surprised it was working as long as it did lol 😆
We appreciate that & welcome to the DIY Raptor Club. Awesome job on your behalf. 10 minutes is a very friendly time. Hope all is well, thanks for watching. 😎👍🔧🔩
1. How to activate Child Lock
czcams.com/video/F3Pyexxs52A/video.html
2. Samsung washer stops at rinse
3. De/Dt/Dc error code
czcams.com/video/BQdpXh4BBpY/video.html
@@terrancebarrett8616
😎👍🔧🔩
@@connieeastridge6713
You are welcome, we are happy to help. Dog hair will definitely do it. Awesome job making it a DIY project!
😎👍
Thank you! Although I drained and checked the cap deal, it still said SUD. I then unplugged my washer for about 30seconds, plugged it back in, and it worked! It finished the last minute of the cycle I had started and then I was able to rewash!
Awesome, and good morning. We are drinking our morning coffee and answering any and all questions for the DIY community.
Let us know if you have any questions. Thanks for watching.
Thanks, I needed that last tidbit to avoid a full-blown panic attack!
@@shannonbachorick849
Panic attacks are no fun!!! 😁👍
It worked! Thank you
@@p-acarriere7245
Heck yeah, that’s great news. Definitely puts you in a good mood tackling this DIY project.
Been fighting with the machine for months. The dreaded SUDS error and didn’t want a repair guy in my house with Covid and all. Super easy fix, works great now. Thanks for sharing your vid! Guys like me who are too stubborn to read the manual need folks like u out there!
Just take the vaccine and your safe from covid.
Looool you still believe in covid?
That comment is 2 years old! Most of us did believe it 😂 @@wp869
Dear Michael, THANK YOU!
I had this issue for more than a month now and google told me that it's due to excess detergent. I went so low with my detergent and tried one load without detergent as well - but no luck.
Just saw your video and opened that plastic lid and guess what. It had a mask in it.
Well, thanks covid.
Just started another load and came here to write a thank you note, hopefully this one's without SUD error,
Dude you’re the guy we didn’t know we needed till now! Thanks a lot man, keep up the great work 🙌🏻
You are very welcome, so happy to hear we could help. Hopefully many stress free days ahead for you.
😎👍🔧🔩
thank you this fixed my issue! Previous owner clearly had dogs because the part that you pulled out on my machine was completely filled with dog hair. Cleaned it out and its running perfect now.
I would like to say THANK YOU for the video. It was amazing how much plastic, lint and other gunk had caught up in the filter. All fixed!
All those items can definitely cause a blockage. We appreciate you watching and reaching out to us David. Welcome to the DIY Raptor Club. Enjoy your day.
😎👍🔧🔩
Thank you so much for this! What an amazing and quick fix (I have been putting colour catchers in my washer which apparently are getting caught in the filter). I really appreciate this help!
Problem solved! I wish I could post a pic of the GUNK that stopped up that drainage! A million thanks!
Tara Robinson
Thanks for watching & you are very welcome. Sounds like you’re back up & running.
Let us know if you have any questions. Us fellow DIY’ers need to stick together!
😎👍🔧🔩
I found Dryer Sheets in my vent! This was so helpful, thanks man, I was starting to think I needed a new washer and was getting so upset, thankful I found this video!
Thanks for watching & sharing your experience. Sounds like you cleaned the filter & are back up and running.
Hope all is well, enjoy your week David.
😎👍🔧🔩
OMG! You're brilliant! I've been on chat with an Samsung expert. She was no help and ended convo with " get a Repair person". I asked about the front drain area and she never responded! So glad you are a CZcams giver! BTW- Filled with dog hair, toothpicks, and labels!
Thanks for watching & sorry to hear you had a rough convo with support. We are so happy to help. Us DIY’ers need to stick together!
Dog hair, toothpicks, & labels sound like the common items, welcome to the club...😁
Hopefully many stress free days ahead for you Patti. Enjoy your night.
😎👍🔧🔩
THANK YOUUU!!!! Others only mentioned the filter, but draining the hose as well probably helped - because now after 3 hours, my washer works again!!!
Awesome Awesome & addressing both is definitely the way to go!!! Welcome to the DIY Raptor Club.
😎👍
Thanks sooo much! My husband and I kept getting the SUD error. I was about to call someone to fix it. I watched your video and gave it a go. I found a dental tooth pick, 25 cents and a lot of animal hair. We have dogs and cats. lol And it smelled too. YUCK! WE have kids, dogs and cats! Thanks to you we are up and running again so far.
Thanks for watching & welcome to the DIY Raptor Club. Sounds like you’re back up and running. We appreciate you reaching out to us Katherine. Great job...& you’re $0.25 richer than you were prior. Enjoy your night.
😎👍🔧🔩
I’ve had this SUD issue for months! Not sure why I didn’t check CZcams before. Thank you so much 😊
You are welcome, and thank YOU! Hopefully after months of putting up with it, you are good to go & in the clear. 😁👍
I was today years old when I found out that there is a drain hose. I’ve had my washer for 7 years and in the past I thought it was normal to clean out the filter and try to contain the rush of water. I had no idea there was an easier way 🤦🏼♀️
Thanks for watching & we appreciate you reaching out to us. It’s always fun leaning something new. Thanks for sharing this Jessica, hopefully many stress free days ahead for you!
😎👍🔧🔩
Same lol.
Me too!
Thank you! This fixed my machine! I have a baby on the way and my machine not working was really stressing me out. I've never been so happy to hear the little song at the end of the cycle!
Awesome, and congrats on both the baby and the successful DIY project.
It’s an incredible and rewarding feeling when accomplishing your projects and saving time in the process.
Welcome to the DIY Raptor Club, enjoy your weekend. 😎👍
Thank you! Over 2 hours on the phone to Samsung, waitlist for a technician and all fixed instead with this video. I didn’t think to check the filter because we clean it monthly and it has been done only 2 loads previously. There was a baby sock rolled up and stuck in with the filter. It took some gentle pulling to get it out but we’re perfect once again
I can never fix anything on my own but your video worked! it was simple and easy to follow instructions and my SUDS error went away and washer is working! Am following you now! thank you!
Jamie, welcome to our DIY channel, we appreciate you reaching out to us. Awesome job making it a DIY project!
We got your (Super Thanks) and that means the absolute world to us, no joke!!!!
THANK YOU THANK YOU THANK YOU!
We will always be here to help out as you work through projects, please never hesitate to reach out to us.
We subscribed to your channel as well.
😎👍🧰
Thanks buddy! Just a heads up, like the video says, really be sure to turn it back in until you hear the double click sound or else the SUD error still shows. And also, I had to unplug and plug my machine back in after doing the awesome steps from the video to get the SUD error to disappear. So far so good!
You are very welcome, thanks for watching. We appreciate you taking the time to share your advice.
😎👍
Thank you - your video was perfect and allowed my daughter and myself to fix our washing machine and get it working again - it was totally clogged!
Thanks for watching. Awesome job to you and your daughter for teaming up and fixing your machine, welcome to the DIY Raptor Club!!!
Hopefully many stress free days ahead for you. 😎👍
I just wanna thank you for the simple and short video. It worked and I'm so relieved. Thank you
That is great to hear & that’s our goal. Helping out our fellow DIY’ers is what we do. Hopefully many stress free days ahead for you Carolyn.
Thank you so much for posting. This has fixed my issue. You are a star!
Appreciate the video!
I’ve followed the instructions for that drain every 2 months for 4 years now.
Never found much.
Guess I skipped a cycle….
Was clogged with pet hair!
Thanks for watching & we appreciate it, us fellow DIY’ers need to stick together! We actually just checked ours a few days ago.
Checking on a regular basis drastically reduces the chances of a failed pump.
😎👍🔧🔩
Thank you so much for your very helpful tutorial. I didn’t know what to do until I saw your video . Now I’m machine is working again !
Thanks for watching, that’s great to hear. We are hanging out today at the DIY Raptor headquarters watching football answering questions for our fellow DIY’ers.
Hopefully many stress free days ahead for you.
😎👍🔧🔩
Thank you! You are the first person I've found to actually solve the problem!!!
Good morning Lara, we appreciate you sharing this. That’s great to hear. Solving this problem for you without wasting any of your valuable time is our goal. We are drinking our morning coffee answering any and all questions for the DIY community.
Let us know if we can help in any way.
Hey also if you’re into crypto trading, join our newly launched DIY community ecosystem.
Toolboxtoken.com
We DIYers need to stick together! 🧰
Thanks so much for posting this! It was so easy to follow and my washer is running beautifully again!
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
You are very welcome, a successful DIY project puts you in a great mood.
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem.
toolboxtoken.com
Reach out to us any time! 🧰
Hi. This video was extremely helpful! I did everything in the video along with removing and cleaning the soap dispenser and the area. Unplugged the washer for about two minutes and it’s working fine.
We appreciate that, thank you. Great to hear you are back up and running properly. 😁👍🧰
Thank you so much. My filter was so clogged I didn't even realise! Fixed my problem.
Very cool & thanks for watching. Hope all is well, enjoy your night.
😎👍🔧🔩
I’m so grateful for this video. Saved me a few hundred dollars. Thank you!
Savings a few hundred dollars is awesome! You can spend that money on something more meaningful.
Let us know if you have any questions, enjoy your night.
😎👍🔧🔩
Extremely helpful! Worked like a charm especially since I just washed the bedding of my two big dogs!
Very cool, we are honored to read this. Thank you. 😁👍🧰
Extremely helpful and appreciate you posting this. It worked as indicated. Many thanks!!!
You are a star. You saved my life. I found this video really helpful. Thank you
We really appreciate you sharing your kind words. Welcome to the DIY Raptor Club.
Hopefully many stress free days ahead for you Roseline.
😎👍🔧🔩
You just help me out so much thanks for this awesome video I have work tomorrow and had to get my clothes washed but the sud error was stooping the wash. 10 out of 10 will start telling my friends about you
Good morning & welcome to the DIY Raptor Club Brad. Great to hear we could help.
Enjoy your day at work, hopefully many stress free days ahead for you.
😎👍🔧🔩
Sweet! Just found the hubby's wedding band. Geez.....TY!
LB XRP
😳...that’s great news! That’s definitely a valuable & sentimental find on your part. We hope the video helped.
😎👍🔧🔩
@@DIYwithMichaelBorders iiiiiiiiio
Regina Brown
😎👍🔧🔩
I bought the Samsung washer in July 2022 and we were getting g this error. Ran across your video due to the SUD error and we found dog hair, alcohol swab, a sticker and small pebbles 😪😭 THANK YOU !!!!
You are very welcome and all those items hanging out in the filter can definitely cause havoc on the cycle.
Awesome job making it a DIY project.
😎👍
Yes! Exactly what I needed! Thank you!!
Monica Artrip
You are very welcome Monica, we appreciate you watching. Let us know if you have any questions.
😎👍🔧🔩
Thank you! This video helped today! Turns out the filter had soo much junk !
Awesome & a filter filled with junk will definitely do it. Great job making it a DIY project.
Hopefully many stress free days ahead for you Helen. Welcome to the DIY Raptor Club.
😎👍🔧🔩
thanks so much, I expected it to be dirty and it is but couldn't believe it clogged too since my daughter's sock was in there too. no idea how it got in there. LOL, Thanks so much for the clip.
You were 100 percent correct. Saved me a big headache!!
Good morning, we appreciate you sharing this. Awesome job making it a DIY project.
Sounds like you’re back up and running.
Thank you for posting this video! Worked like a charm!
You are very welcome & welcome to the DIY Raptor Club. That’s great to hear. Us fellow DIY’ers need to stick together. Let us know if you have any questions. Enjoy your day.
😎👍🔧🔩
Thank you, I found the filter really dirty. Excellent video! 👍👍👍.
Francisco Sanchez
Very cool. We are happy you’re back up & running & your DIY project didn’t cost you a thing.
Let us know if you have any questions. Please subscribe to the channel and ring your CZcams bell 🔔 this will be very helpful to us thanks again.
😎👍🔧🔩
amagictouch
Thanks for watching. We are here to help. We recommend cleaning it once every few months...or maybe once a month. 😀👍
Please subscribe to the channel and ring your CZcams bell 🔔 this will be very helpful to us thanks again.
😎👍🔧🔩
Thank you….. so happy I came across your video. you saved me from having to call a mechanic.
You are very welcome Dina, welcome to the DIY Raptor Club. You can put that money toward something more meaningful.
Hopefully many stress free days ahead for you. 😎👍🔧🔩
Thank you so much for posting this vid! It was such a life saver. I appreciate you and this video so much.
As I found the panel ... with a sticker saying ‘remove and clean drain every two months’ I realized that in some aspects my husband and I aren’t star pupils at adulting... since we’ve had this machine for four years... and today we found this video... and our drain filter. Holy. Cow. Four years x two dogs x twins that were 4 year olds when we got the machine.... gross is an understatement. I had to bleach the drain plug itself to tame the odor!🤢
Thank you for the detailed guide, especially the ‘little tips’ like having the towel handy for very clogged filters and the need to be gentle with the tubing and plastic parts
Thanks for watching & welcome to the DIY Raptor Club. Sounds fun & the same thing happened to us years ago.
We purchased a house & the washing machine was 4 years old...&...well...it kinda looked & smelled like it was never cleaned...not ever...🤣
We appreciate you reaching out to us. Enjoy your night Judith.
😎👍🔧🔩
Super helpful. Thanks for making these tutorials!
Hey Kristen, we really enjoy making these tutorials. We DIYers need to stick together! 😎👍
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem.
toolboxtoken.com
Reach out to us any time! 🧰
Fixed my washer with your video , thanks !
Sweet. 😁👍
We are honored to read this, thank you. Let us know if you have any questions.
Thanks mate! I solved my problem thanks to your video. Awesome!
Very cool & we are thrilled to help. Great to hear you are back up and running. Hopefully many stress free days ahead for you.
Enjoy your day. 😎👍🔧🔩
Great info! Had two masks that had ended up in the filter. Easy fix thanks to your video.
Thanks for watching & sharing this. Glad to hear the video helped. Us fellow DIY’ers need to stick together!
Hopefully many stress free days ahead for you, enjoy your day Angela.
😎👍🔧🔩
@@DIYwithMichaelBorders this particular code wasn’t even listed in the owners manual
Thank you and I had this problem and after watching your video and it fixed. After draining all the water, I unplugged for about a minute and it perfectly worked out. Thank you so much
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
Awesome job making it a DIY project, no joke. Definitely helps pave the way for a more enjoyable weekend. 😁
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
You rock! Found about $1.50 in loose change in the filter, too 😅
Thank You, thank You, thank you for the info my Samsung Washer has had that error message for the longest !!
Thanks! Solved my problem. Make sure you do wait before you undo the filter. Flooded ny bathroom and basement!
Thanks for watching & we appreciate you reaching out to us. We are happy to hear the video helped. Let us know if you have any questions. Us fellow DIY’ers need to stick together!
😎👍🔧🔩
Thanks to this video, I just fixed a washer with "SUD" code and not spinning.
Soljer Blue
Awesome Awesome & that’s great news. Sounds like you’re back up and running. Let us know if you have any questions.
😎👍🔧🔩
Thank u for this video! Easy to follow and to do. Solved my problem.. All clogged up with dog fur!
You are very welcome & thanks for watching. Enjoy your day!
😎👍🔧🔩
You are very welcome & thanks for watching. Enjoy your day!
😎👍🔧🔩
Thank you sir. Found a sock in filter. Works now perfectly after fix.
Thanks for watching & you are very welcome. So happy to help. Us fellow DIY’ers need to stick together!
Enjoy your day! 😎👍🔧🔩
Thanks sooo much!💕 It worked! I had a sock, lint, dog hair, and a piece of plastic in there. Wow!
Very helpful!! Thank you so much 👏🏾👏🏾👏🏾👏🏾
Hey Tiffany, you are very welcome. Hopefully many stress free days ahead for you.
😎👍🔧🔩
Such an easy fix! Surprising how many little baby things came out of the filter (4, the answer was 4!)
This work as soon as I tried it, my filter had a pen, a sock, $.31¢ and a bunch of lent. I cleaned it and ran a cycle and voilà.
Thank you.
Sonja Baston
Thanks for watching & sounds like you’re back up and running...& you got paid to do it. We love it. 😎👍🔧🔩
Thank you so much for this incredibly helpful video!!!! We have 3 animals so when we do laundry, it seems as though all the pet hair clogs up. I pulled out that filter and it was completely filled to the rim with animal hair, and misc things. The washing machine always smelled like urine and after draining the water from the tube it seems to be slowly going away - here’s hoping the laundry smells fresh once the cycle is done. Thank you again!
Good morning ☕️
Animal hair buildup will definitely do it. And that’s a great point…now that it is cleaned out…you may notice a fresher cleaner smell.
😁👍
This video was SO helpful. Currently draining mine as we speak 😅
Thank you for sharing this, and awesome job making it a DIY project.
😁👍🧰
Thanks for educating the community and appreciate your volunteering Thanks to team
Could you please post some more videos with small small tip which any one could do without a mechanic
Thanks for watching & we appreciate you reaching out to us. Many more helpful videos to come.
😎👍🔧🔩
Thank you very much this helped me out A LOT. 🙏🏽🙏🏽🙏🏽
Great to hear & you are very welcome. Thanks for watching. Hope all is well.
😎👍🔧🔩
Great tips, many thanks all the way from Dublin Ireland, Up the Dubs
Thanks for watching & welcome to the DIY Raptor Club. We appreciate it Declan from Dublin Ireland, you Rock!
Enjoy your day! 😎👍🔧🔩
Thanks. This was a good help and fixed my problem.
I would add to the removing the filter portion
- I had to tug and wiggle it free from bound up hair
- It is GROSS. It smells rancid and is filled with hair based sludge.
I definitely earned a Klondike bar.
Thanks John, and your added advice is greatly appreciated. This project can definitely be a bit gross as you mentioned. 😎👍
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Had no idea that this was a thing …
Thank you !
Yey! It worked! My filter was so dirty. Thanks for the DIY. I'm gonna smash that like button for sure! :)
Very cool & we appreciate that. Enjoy your day. 😁👍
Unbelievable!!!! First time ever fixing my washer with the SUD error!!!!! 🎉
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
Awesome job, you have officially earned your DIY badge! We really appreciate you taking the time to share this.
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Thanks! Just had the sud error and I drained the little hose. I knew the filter was ok I cleaned that last night. But today I cleaned the machine with a cleanser I should have did a plain water cycle afterwards
Thanks for watching & you are very welcome. Great to hear you’re back up and running.
Cleaning system was a good idea, hopefully many stress free days ahead for you. 😎👍
Thanks! I had no idea about the code or what to do. Thanks a million. We got it working.
You are very welcome jay, so happy to help. Enjoy that fresh self cleaned machine. 😎👍
Thank you that was really helpful. I appreciate you making the video.
Good afternoon, you are very welcome. Thanks for watching, hope all is well.
😎👍🔧🔩
Thank you Sir!! You saved me a service call and saved me money!! Thank you for your detailed, info!!
We are happy to help, and thanks to you as well for making it a DIY project. Great job!
😎👍
Thanks! Problem solved. ☺️This was super helpful.
Awesome & we appreciate you sharing this. Us DIY’ers need to stick together JenJen.
Hopefully many stress free days ahead for you.
😎👍🔧🔩
Thank you so much for this video you saved me so much money. And it was super easy
Great to hear & we appreciate you watching. Hope all is well.
Enjoy your night. 😎👍🔧🔩
Great video. Thank you so much for your help.
We appreciate that & thanks for watching. Enjoy your day.
😎👍🔧🔩
Worked like a charm. Thanks 🙏🏾
So happy to help. Hope all is well.
😎👍🔧🔩
This is it. It fixes the error. Thanks!
Thanks, I do not use soap as I use ozone generator and when I saw SUD I was like no way. But alas, a little lint can clog up a filter. Thanks again.
You are very welcome. 😁👍
Thank you so much. I found a huge clump of lint, a necklace, a golf tee, and a QuickTrip coupon.
What’s up Kyle, you are very welcome. Those are treasure items. 😁👍
Thank you! I have 3 dogs and 2 cats so my filter was filled with pet hair. I will clean this every month when I clean the drum!
You are very welcome Amanda, we appreciate you watching. We do the same, cleaning filter once a month goes a long way.
Enjoy those pets. 😁👍
I did three loads of cat beds after receiving my new washer and the sud code came on so beings I bought it specifically for my rescue I will check filter after every load or two. I knew when I saw the easily accessible filter on the front, I knew I better get it... But it's interesting how my old duet filter only needed cleaning about once a year! So this filter system must be more sensitive and probably catches more debris. Ill try it on the morning and how I fix it. Thank you for video because my manual booklet did not mention the drain connected to sud code.
js s
Thanks for watching & definitely keep us posted on how it works over the next few weeks. Us fellow DIY’ers need to stick together!
😎👍🔧🔩
Hey, your video has been SO useful! My family recently moved into a new house and the previous family left their washer and dryer. You've helped with the suds issue, but I can't pull out the filter 😭 It just keeps spinning. I saw a different comment about the same issue and read your reply, but that didn't work either. Any ideas? Oh, and did you mean to have a link under the #2 in your pinned comment? Because we had that issue. Except it would say Suds during the rinse part. I hope you're still an active channel! You've been a blessing to start with!
Thanks for watching, we have copied & pasted our comment from your other video request in hopes that it helps.
😎👍
Thanks for watching & welcome to the DIY Raptor Club. At this point you will need to replace your filter housing. This part connects to the Drain Pump motor/housing. This is a friendlier fix than you think. 😀👍
Below is a link to a video replacing a pump motor to a different washing machine however you will see the filter housing part as well.
czcams.com/video/M2LltDIjNl0/video.html
Please keep us posted. 😎👍🔧🔩
@@DIYwithMichaelBorders Update! Before we tried anything else we double checked the manual and missed a page about the filter! Turns out the child safety lock was on (which is both hilarious and humiliating) and my mom was able to get the filter out! 🙌🏻 That explains the spinning. Both my dad and I failed to get the filter out even with the idea to push in 💀 At least it was an easy fix. We would have had no idea where to start so once again, thank you!
@@ChicNuggetu
OMG...😁...we appreciate you sharing your update. Great to hear you’re back up and running. Hopefully many stress free days ahead for you.
😎👍🔧🔩
@@ChicNuggetu help!! We also got this washer from buying a house and I think are having the same issue, only we don’t have the manual. Is the child safety lock when it spins and clicks? And you said pushing it in unlocks it? Because I’m trying that and it’s still not working! What page of the manual are you referencing? Thanks!!
@@skitzkit Yes! So sorry to get back to you late I got a new phone and I still have to turn on notifications for some apps. The child safety lock is when it spins and clicks! You do have to push it in and turn it counter clockwise in order to completely take it out. I don't know why but my dad and I struggled with that but my mom got it easy, so if you don't get it after five tries, KEEP TRYING! This is mentioned in page 52 of the Samsung Washer manual. :) (It mentions unplugging the power chord, but we didn't do that bc we can't reach it where the previous family placed it, it should be fine to do it without unplugging, just make sure the machine is off, and drain it with the little hose connected!)
Thank you for this helpful video
You are very welcome, so happy to hear this. Hope all is well. 😎👍
Thanks you are such a great help
Good morning, we are drinking our morning coffee answering any and all questions for the DIY community.
Thats very kind of you to share, thanks for watching. 😎👍
Thanks! I have the same washer as you but I don’t have the bases for them. My drain is low to the floor so I got out as much water as I could in a bowl and then put the drain hose in a small plastic water bottle to drain the rest.
You are very welcome & thanks for watching. Enjoy your day!
😎👍🔧🔩
I just came here to say that it is the year 2021 and it was ME FOOKIN MASK in the filter 🤣🤣🤣 Thank you for the tutorial!!!
Good morning & thanks for watching Chelsea, we appreciate you reaching out to us. Sounds like your Mask will live to see another day. 😀
Hope all is well, let us know if you have any questions, enjoy your day.
😎👍🔧🔩
Thanks for the great video! I just found a mask in there also! After getting the SUD error over and over, we just kept pressing 'start' and the machine would attempt to finish the cycle. Eventually it would get there... Although this time, there was an almighty cracking sound, then dirty water spillled out from under the machine. Do you reckon it's ruined, or is there some sort of pressure relief valve for the drain pump which had simply released???
@@nathanlouey
Thanks for watching & sharing your experience. It’s possible that the motor itself was overworked & has begun to leak. We recommend replacing pump & double checking the filter is clean & clear.
Keep us posted, us fellow DIY’ers need to stick together. Enjoy your day Nathan.
😎👍🔧🔩
@@DIYwithMichaelBorders Thanks for the reply!! the machine finished it's spin cycle and pulled the water out fine, so I think the pump works OK? I tried to start a new cycle however and as soon as the machine started filling, water flowed into the floor... I guess I'll start pulling it apart to see where the water is leaking from
@@nathanlouey
Thanks for the reply & please keep us posted on what you find.
Awesome video this was exactly my problem thanks man
Very cool, thanks for watching & sharing this. Welcome to the DIY Raptor Club jesse. 😎👍
Thank you so much. I was worry that it was going to be a very expensive repair.😁😁
Good morning & you are very welcome. Thanks for watching, hopefully many stress free days ahead for you Reyna.
😎👍🔧🔩
Thank you so much. It works again.
Thanks for watching, you are very welcome. Getting your washer back up and running is a great thing.
Hopefully many stress-free days ahead for you. 😎👍
Thanks !!! Just fixed my machine all by myself 😜😜
Awesome & great job Vanessa. We appreciate you sharing this & welcome to the DIY Raptor Club. Hopefully many stress free days ahead for you.
😎👍🔧🔩
THANKS! saved my mom over a grand
Amazing. Thank you so much!!!
Kara Allen
You are very welcome. Us fellow DIY’ers need to stick together.
😎👍🔧🔩
Thanks broski help my family so much.
So happy to help, hope all is well with you and your family.
Many more helpful videos to come!!!
Excellent tutorial video 👍🇺🇸
Thank you, we are honored to read this. The DIY community is the best!
😁👍🧰
Thank You so much for sharing!
We are happy to help, and thank you. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Thankful I already fixing Washing machine 😊😊 thank youuuu agen best of luck
We appreciate that & thanks for watching. Hopefully many stress free days ahead for you.
Best of luck to you as well. 😎👍
Thank you for the video it really helps. Make more videos.
Thank you for this! Haven't tested it yet, but OMG, there was so much stuff in there! I'll be sure to do that regularly now.
You are welcome, and thank YOU!!
Let us know how it goes once you run that first “Post filter cleaning” cycle.
😎👍
@@DIYwithMichaelBorders Unfortunately, now it's leaking from that filter! Can't seem to get it on where the water isn't just pouring out. 😥😥
@@DisneyBirdLady
Thanks for the follow up. Any update? The filter cap/plug itself should have a over-tight prevention design to it not allowing you to over-tighten or under-tighten it.
Kinda similar to the your gas cap on your car.
@@DIYwithMichaelBorders we were able to get it on and it stopped pouring water it at first, but it's not leaking again, just not as much. ☹️ What could have happened?!?
@@DisneyBirdLady
Thanks for the follow up, not exactly sure. It’s possible that the o-ring got offset when screwed tight.
Thank you so much for making this video I was able to fix my machine without calling for handyman. Found a lot of gunk in that filter surprised it was working as long as it did lol 😆
Thank you - the advice fixed the problem in 10 minutes, with minimal fuss !!
We appreciate that & welcome to the DIY Raptor Club. Awesome job on your behalf. 10 minutes is a very friendly time. Hope all is well, thanks for watching.
😎👍🔧🔩