How to choose a power supply for LED strip. Calculation of the power supply. # Yourself the Master

Sdílet
Vložit
  • čas přidán 1. 04. 2017
  • Today I will tell you how to calculate and select the power supply for the LED strip.
    Calculating the power supply is not complicated - simple math.
    Channel Himself Master: / @user-wz7vv2ic5u
    #Self_Master
    Suppose you need to set 18 meters of tape in a rectangular niche ceiling of the room. LED strip is sold in a package, usually 5 meters. So you have to buy 20 meters.
    Select LED strip is better on websites selling LED equipment.
    On the site there is an opportunity with the help of filters to quickly find the necessary equipment and immediately know its price.
    You have chosen a LED strip for 12V power supply, consuming 24W for 5 meters. The site shows the power consumption of the LED strip for the entire coil - 5 meters, and for one meter. Copy or write down all the parameters of the selected LED strip. You will need them for calculations.
    The power on the site for one meter is 4.8 W. Multiply by the amount of tape you need, in our example this is 18.
    As a result, we get 86.4 watts. Power consumption.
    Power supplies for LED tape are recommended to be selected with a margin of 20%.
    To ensure that the power supply is not heated and has served us for a long time, we calculate a stock of 20% to our calculations using the formula:
    86.4 times 20 and divide by 100.
    We get 17.28 watts. Is 20%
    Now we add our stock of 20% to the power of the LED tape 17.28 + 86.4. As a result, it turns out that we need a power supply unit with a power of at least 104 watts.
    However, the power supply with an accuracy of 1 Watt, you will not find, because the manufacturers produce them with certain values.
    Now it remains to choose the power supply.
    - again go to the site
    - find power sources
    - choose the 12 volt we need
    Now there is a choice between sealed and non-sealed power units. Sealed blocks are recommended not only in cases when moisture may get on them, but also when you plan to change the brightness or color of the LED strip, i.e. Use dimmers or controllers. In such systems, open power supplies can produce a quiet but unpleasant squeak.
    In public places, this can be completely unnoticed, but where silence and peace, such as in bedrooms or children's rooms, are required, such a sound can be annoying.
    Unlike open blocks, the internal space of hermetic power sources is completely filled with a compound, and therefore the extraneous sound during their operation is hardly audible even at a small distance.
    - choose sealed power supplies in a metal casing, since sealed in a plastic casing are designed for a power of 100W or less.
    - now we begin to search for a suitable power supply
    - nearest to our calculated values, with rounding to the higher side - 120 W.
    This is a large power supply unit with a length of almost 21 inches and a width of 6 cm, its height is almost 3 cm. It must be taken into account that for normal operation and natural ventilation of the power supply it is necessary to provide him with a free space of at least 20 cm.
    If you do not fit such dimensions of the power supply, you can buy two power supplies of 60 watts. each. They are slightly smaller in size. In addition, in this case, you can purchase waterproof power supplies and in a plastic casing.
    You can purchase 4 power supplies, which are even smaller in size. Two by 24 watts. And two to 36W., Connecting them to each section of the LED strip, respectively, to 4 meters and to 5 meters. Remember one more not unimportant fact - power units of low power allocate not so much heat, as powerful and not so demanding to a place of accommodation.
    In addition, with multiple power supplies, you can avoid folding the LED strip during installation. How to bend the tape I told in one of my previous videos: • Монтаж, установка и по...
    When installing power supplies, follow the manufacturer's recommendations:
    - Do not install power supplies close to each other;
    - Do not place the power supply on the LED strip or against it;
    - Place the power supply as close as possible to the place where the LED strip is connected.
    - in the case where the power supply can not be located at a short distance from the LED strip - use wires with the optimal cross section, taking into account the load power and the length of the wires.
  • Věda a technologie

Komentáře • 25

  • @user-cz2xd5de1o
    @user-cz2xd5de1o Před 6 lety

    Здравствуйте. А можно использовать блок питания из светодиодных прожекторов?

  • @mikedog656
    @mikedog656 Před 7 lety

    молодец, все ясно!

  • @user-lh9vw5pe8o
    @user-lh9vw5pe8o Před 2 lety

    Какое напряжение блока иленты лутший

  • @sergo6312
    @sergo6312 Před 4 lety

    Не мне 18 метров не надо. а надо 1м 60 см какой мне блок взять с запасом? Лента бутет вкл через выключатель !!

  • @angorets77
    @angorets77 Před 3 lety

    Какой блок лучше перфорированный или узкий с теми же параметрами

    • @user-wz7vv2ic5u
      @user-wz7vv2ic5u  Před 3 lety

      Нет разницы какой.

    • @angorets77
      @angorets77 Před 3 lety

      @@user-wz7vv2ic5u но количество элементов в перфорированной больше

  • @rusgods
    @rusgods Před 4 lety

    Имею прожектор LED на 50 ватт (5 светодиодов каждый по 10 ватт), БП с запасом это 60 ватт?

  • @user-wz7vv2ic5u
    @user-wz7vv2ic5u  Před 7 lety

    Сегодня я расскажу как рассчитать и выбрать блок питания для светодиодной ленты.
    #Сам_себе_Мастер

  • @skydiver8615911
    @skydiver8615911 Před 6 lety

    светодиодная лента 5050 12 вольт 30 ватт : можно ли использовать такие блоки питания www.banggood.com/ru/ACDC-12V-6A-72W-Power-Supply-Charger-Adaptor-For-CCTV-Camera-p-943212.html?rmmds=mywishlist&cur_warehouse=CN

    • @user-wz7vv2ic5u
      @user-wz7vv2ic5u  Před 6 lety +1

      Для подключения светодиодной ленты можно использовать любой источник постоянного питания соответствующий ее вольтажу и мощности. Другой вопрос насколько в нем стабилизирован ток. От этих параметров зависит будет ли мерцать светодиодная лента. О гарантии этого прибора ни слова.
      Считаю, что лучше приобретать блоки питания, которые изготавливаются специально для светодиодных лент и в специализированных магазинах, которые дают гарантию.

    • @skydiver8615911
      @skydiver8615911 Před 6 lety

      Сам себе Мастер. спасибо!

  • @sascha_s3478
    @sascha_s3478 Před 6 lety

    Зачем выбирать блок питания в металле на 150w, если можно выбрать блок питания в защитном кожухе до 250w в защитном кожухе?? Все блоки до 250 идут без кулера, и вполне подойдут для использования в помещении.

    • @user-wz7vv2ic5u
      @user-wz7vv2ic5u  Před 6 lety

      К сожалению негерметичные блоки питания, особенно дешевые китайские, издают писк и шум даже не имея кулера. Порой даже без нагрузки.

  • @user-sy5cm2nk2e
    @user-sy5cm2nk2e Před 6 lety +3

    Задолбали, ё моё.. мы сюда за рекламой приходим, что ли? или вам отстегивают за это?

    • @user-wz7vv2ic5u
      @user-wz7vv2ic5u  Před 6 lety +2

      Вы хотите сказать, что это рекламный ролик от которого вы не получили никакой пользы?1. Никакой рекламы. Я настоятельно рекомендую проверенные опытом материалы.
      2. Если вас "задолбала" реклама не смотрите телевизор, не входите в интернет, не ходите по улице. Не, даже не так. Вообще никуда не ходите. Она заполонила весь мир.
      3. Будьте сдержанней. Такой красивой женщине не перестало так выражаться.
      4. Простите меня.

  • @academymm4330
    @academymm4330 Před 6 lety

    Почему у Вас масонский знак на главной CZcams?))))

    • @user-wz7vv2ic5u
      @user-wz7vv2ic5u  Před 6 lety +1

      Масонские знаки и символы состоят из предметов, которые существовали задолго до образования этих обществ.
      Однако на моем канале такие предметы как циркуль и наугольник символизируют точность и аккуратность, которой я стараюсь следовать. Буква "G" в центре это первая буква моей фамилии, и ничего общего с Богом и геометрией не имеет.
      Тема действительно очень интересная и спорная.)

    • @academymm4330
      @academymm4330 Před 6 lety

      Это не придирка))) Вы не обязаны были отчитываться... Но всё же совокупность этих предметов именно в такой форме и ещё буква G - это именно масонская символика. Вы же в конце концов не сами создали этот логотип. Он был скачан с интернета. А про первую букву фамилии не знал. И правда тогда совпадает))) И по тематике тоже. Ваши ведь инструменты))))

    • @user-wz7vv2ic5u
      @user-wz7vv2ic5u  Před 6 lety +1

      Это был не отчет, а ответ на ваш вопрос.)