I just ordered a set a couple weeks ago and am awaiting delivery. If I knew you had them, I would have gone through you guys. Glad to see a positive review from you before they arrive. I ordered the red outside with the smoke center. Love it when you do the C6 stuff! Keep up the good content!
Thanks Lyle! Wow very cool and I just upgraded to Morimoto 18 months ago…. They are cool but like this new product. Agreed with the 1st commenter: C6 lights are badass!
This was a great review Lyle! 👍👍 I have the Morimoto's, which I love, but now you really have me thinking. At the three-quarter view, they look like deep dish wheels. Cool! I just have to find the $$$ to do it. Save the Wave🙋♂
Florida Baby. We freeze like twice a year, pray for monthes for no hurricanes and have a blast year long not worrying about shoveling snow! Thanks Lyle!
Geez, I just installed the wiring harness to rid me of hyperflash. Just trying to keep my car looking original as possible…. But these are really really nice
The link to the lights is the first one. i just tested it and it works. The second link is to C & S Merch and will NOT take you directly to the lights. Lyle
wish these came out before I bought the Morimotos - they are still good but I probably would have went with these. - I"m in town, you have an installed set I could look at?
Are these tail lights plug and play ? Do you take out the small screw in the top of the tail light, then pull the light out and unplug then plug in the new light ?
Exactly. The only additional work would be to wire in the reverse lamp function if you so desire. All other taillight functions are functional with the removal of 1 screw and the unplug/plug in new lamp procedure. Lyle :)
I installed these on my 2006 convertible. The mounting ring at the top of the lens is VERY flimsy. I did not muscle the screw down…as a matter of fact I didn’t get one tight enough and the taillight actually fell out while I was driving. I had to put a small washer on the screws because each and every mounting ring was cracked or completely broken. This did not feel like hard plastic like the stock taillights, it was extremely flimsy and fell apart. My suggestion to the manufacturer is to mold a washer into this area or change the plastic it’s made of.
I think adding some black "shoe goo" to this area and letting it cure for a week would solve this problem. They do appear to be the coolest looking lights.
When I installed them for the video on Steve's Grand Sport, I found the tabs to be more than sufficient for the task at hand. I can tell you that I had to shift the mounting clips rearward to properly line up with the holes in the tabs on the lights. I have to do the same thing with the Morimotos. I'm sorry that you had a negative experience with these lights, however I wonder of you aligned the steel clips in the bumper cover to match up to the holes in the tabs on the lamps as i had to do. Let me know. Lyle
@@csvette Lyle, I just now saw your reply…mine lined up nicely, there was no problem with that. The mounting rings at the top of the light were all defective in my opinion. Compared to the stock lights, they were weak and easily broken. It took virtually no effort to break the pieces that were broken off… by that I mean that the bits that broke off seemed to have absolutely no strength at all. I have since put a lock washer on the mounting screw to help hold the light in, which seems to be working well.
Hey Lyle, hopefully wanted to pick your brain. So, I have these, and I ran the reverse light wire down and attached them to the green reverse light wire and none of them work. The standard reverse lights still work. Any thoughts?
Who did you buy them from? There are solutions to that issue that your vendor should have offered to you. That is their responsibility. Resistors can be put in place to help. This is NOT a common issue with these LED taillights. It is very likely that you are having grounding issues or you have other aftermarket electronics in the car that are not properly grounded. I'll help however I can, but the lights aren't "crap"...you have something else going on. Lyle
These lights are really cool. Hope they consider designing and manufacturing these for the C5.
I second that.
Hopefully the manufacturer is reading this.
Maybe our Corvette buddy Lyle can reach out to them…
It's in development from what I've been told
I was thinking 💭 the same thing 🙌🏾 we need some for the C5 😊
Great product for the C6 -
Although these are not for me, please continue to do updates for the C6.
I just ordered a set a couple weeks ago and am awaiting delivery. If I knew you had them, I would have gone through you guys. Glad to see a positive review from you before they arrive. I ordered the red outside with the smoke center. Love it when you do the C6 stuff! Keep up the good content!
I have these. You will not be disappointed!
Best taillights of any year vette by far and away.😊😊😊
Thanks Lyle! Wow very cool and I just upgraded to Morimoto 18 months ago…. They are cool but like this new product.
Agreed with the 1st commenter: C6 lights are badass!
Thanks Lyle. ❤
C3 1977 here, I always love your information. And Grand Sport is my next fave.
Be well, keep making great videos!!
This was a great review Lyle! 👍👍 I have the Morimoto's, which I love, but now you really have me thinking. At the three-quarter view, they look like deep dish wheels. Cool! I just have to find the $$$ to do it. Save the Wave🙋♂
I know it has nothing to do with taillights but when you mentioned sunny Sarasota we are expecting freezing rain tomorrow in northern Michigan
Florida Baby. We freeze like twice a year, pray for monthes for no hurricanes and have a blast year long not worrying about shoveling snow!
Thanks Lyle!
Nice video Lyle 👍
I have these installed. These are so awesome!
Don’t forget us C5 guys!!! 😎
In development now! :) Lyle
Geez, I just installed the wiring harness to rid me of hyperflash. Just trying to keep my car looking original as possible…. But these are really really nice
Thanks for sharing. Could you do a step-by-step video on installation. It would be greatly appreciated. Thanks again
very nice, but I need a set for a C3, lol
Changing my C5 lights over to these.
Thanks!
Love it
I seen these I dont like how they look when they are turned off
P.S. to earlier comment. Your link does not lead me to these Infinity taillights. Help please.
The link to the lights is the first one. i just tested it and it works. The second link is to C & S Merch and will NOT take you directly to the lights. Lyle
@@csvette Thank you Lyle. I was just pressing on the C & S Merch link. Thank you so much. I will be ordering these from you.
Save the Wave 🙋♂ Peter
What about striker rgb lights for c6?
wish these came out before I bought the Morimotos - they are still good but I probably would have went with these. - I"m in town, you have an installed set I could look at?
Yes, we have them in Steve's Grand sport. :)
Nothing for the C5 yet from them ?
Are these tail lights plug and play ?
Do you take out the small screw in the top of the tail light, then pull the light out and unplug then plug in the new light ?
Exactly. The only additional work would be to wire in the reverse lamp function if you so desire. All other taillight functions are functional with the removal of 1 screw and the unplug/plug in new lamp procedure. Lyle :)
I installed these on my 2006 convertible. The mounting ring at the top of the lens is VERY flimsy. I did not muscle the screw down…as a matter of fact I didn’t get one tight enough and the taillight actually fell out while I was driving. I had to put a small washer on the screws because each and every mounting ring was cracked or completely broken. This did not feel like hard plastic like the stock taillights, it was extremely flimsy and fell apart. My suggestion to the manufacturer is to mold a washer into this area or change the plastic it’s made of.
Reading this exact review, it stopped me from buying this. Thanks.
I think adding some black "shoe goo" to this area and letting it cure for a week would solve this problem. They do appear to be the coolest looking lights.
When I installed them for the video on Steve's Grand Sport, I found the tabs to be more than sufficient for the task at hand. I can tell you that I had to shift the mounting clips rearward to properly line up with the holes in the tabs on the lights. I have to do the same thing with the Morimotos. I'm sorry that you had a negative experience with these lights, however I wonder of you aligned the steel clips in the bumper cover to match up to the holes in the tabs on the lamps as i had to do. Let me know. Lyle
@@csvette Lyle, I just now saw your reply…mine lined up nicely, there was no problem with that. The mounting rings at the top of the light were all defective in my opinion. Compared to the stock lights, they were weak and easily broken. It took virtually no effort to break the pieces that were broken off… by that I mean that the bits that broke off seemed to have absolutely no strength at all. I have since put a lock washer on the mounting screw to help hold the light in, which seems to be working well.
Hey Lyle, hopefully wanted to pick your brain. So, I have these, and I ran the reverse light wire down and attached them to the green reverse light wire and none of them work. The standard reverse lights still work. Any thoughts?
call me at 800-886-5064 Lyle
Do they make them for the C5 ?
5:52
How about c5’s
Theyre crap. Too much radio interference…
Who did you buy them from? There are solutions to that issue that your vendor should have offered to you. That is their responsibility. Resistors can be put in place to help. This is NOT a common issue with these LED taillights. It is very likely that you are having grounding issues or you have other aftermarket electronics in the car that are not properly grounded. I'll help however I can, but the lights aren't "crap"...you have something else going on. Lyle