PS4 jailbreak PPPwn setting for raspberry pi on PC side

Sdílet
Vložit
  • čas přidán 8. 09. 2024
  • ======Hardware==================
    SD card
    card reader
    raspberry Pi 4B
    ======Software==================
    Raspberry Pi OS
    www.raspberryp...
    raspberry pi OS lite 64
    The stooged PI-Pwn reference
    github.com/sto...
    Your IP address
    cmd
    ipconfig
    network scanner
    www.softperfec...
    putty command config raspberry
    www.putty.org/
    Goldhen copy to root of USB drive exfat / fat32
    GoldHEN v2.4b17.3 GoldHEN_v2.4b17.3.7z copy to root usb EXFAT format
    github.com/Gol...
    ======Command use on putty==================
    sudo apt update
    sudo apt install git -y
    sudo rm -f -r PI-Pwn
    sudo systemctl stop pipwn
    git clone github.com/sto...
    sudo mkdir /boot/firmware/
    cd PI-Pwn
    sudo cp -r PPPwn /boot/firmware/
    cd /boot/firmware/PPPwn
    sudo chmod 777 *
    sudo bash install.sh
    ====PS4 side ===============================
    Connect your PI to ps4 with LAN / USB
    start ps4 with PPPoE
    for first time connect USB drive with goldhen.bin
    First time run PI-PWn folder does not exist it will show error just ignore it

Komentáře • 11

  • @GameConsolefish
    @GameConsolefish  Před 2 měsíci

    Just leave it 5
    Most of the setting can change later

  • @sigma-kinggaming5593
    @sigma-kinggaming5593 Před 2 měsíci

    Is it OK to keep the timeout value to 1 min or leave it 5 min ?

  • @sigma-kinggaming5593
    @sigma-kinggaming5593 Před 2 měsíci

    Using Raspberry pi zero 2 w with usb to ethernet port, 8/10 tries it goes to kernal panic and shuts down

    • @GameConsolefish
      @GameConsolefish  Před 2 měsíci

      at the 4:58 time
      in the menu change the following options
      check firmware version
      use the originalipv6 address
      if y then N / if N then Y

  • @sigma-kinggaming5593
    @sigma-kinggaming5593 Před 2 měsíci

    Do we have to copy ppwn folder to the sd card ? Because when the codes are writing in putty it shows directory not found

    • @GameConsolefish
      @GameConsolefish  Před 2 měsíci

      U can ignore the error
      First time run the folder do not exist
      Git clone.... Will make the folder

  • @FF_AlohaEdition
    @FF_AlohaEdition Před 2 měsíci

    Github says it rpi 4 and 5 can pass through the console usb port. Does that mean no need to plug the ethernet?

    • @GameConsolefish
      @GameConsolefish  Před 2 měsíci

      Point-to-Point Protocol over Ethernet (PPPoE) Ethernet connect is a must The pass through is for inject Goldhen

  • @ndt7350
    @ndt7350 Před měsícem

    After JB, my PS4 is PS4HEN instead of Goldhen. can you help me ?

    • @GameConsolefish
      @GameConsolefish  Před měsícem

      @@ndt7350 if your ver is above 9
      Download lastest goldhen
      Reboot with new usb it will override

    • @praveensuvarna7902
      @praveensuvarna7902 Před 17 dny

      I tried it did not work.. please help