Roller Screed Demo

The MARSHALLTOWN Roller Screed in use.
EDI: 19435
Part#: RS14
Available Tube Lengths:
4', 5', 6', 7', 8', 9', 10', 11', 12', 14', 16', 18', 20', 22', 24', 26', 28'
For more information visit: marshalltown.com/roller-scree...
or call 800-888-0127 to talk to a customer service representative.

[@stevegeorge3594]

watched a crew do a 24 foot wide x 60 foot with one. they put duct tape over the pre- poured sidewalk and put a 2x4 stringer inside other end a foot from asphalt pulling it as they passed. Their's looked like it was driven by a hand threader. Basic,two speeds, and reverse. It rocked!! Done a lot of screed-n and this is the way to go. 4 guys one was floating. Turned out awesome. If your tube does get worn down. Your favorite welder/machinist would make it all better and well worth the cost.

[@gabrielgonzales8163]

El ranchero
Buena construccion
Concreto like💜

[@freshgardenlandscaping7637]

Niceeee!!!

[@fakku6356]

i can see that there is a lot of wear in the area where the rod touches the concrete and my question is whats the life span of these tools ?

[@didisaythat4230]

Thats the first question that arose in my mind as well. Any sort of wear will make the work too low. Seems like each side would benefit from having wheels and the roller pin would float at the hight of the bottom of the wheels.

[@rajkumaarparjapati9483]

Iam working

[@hurronred2088]

Есть и такие мужики, за много лет, ни английского, ни документов, ни работы!

[@franco912]

Workers' Back savings

[@rentaldeherramientas3077]

Hola, cuanto cuesta la herramienta? Gracoas

[@MarshalltownCompany]

Here is a link marshalltown.com/pro-2110-roller-screed-kits

[@williamdubon5034]

I have a magic screed i use it once it's been in my shed for the past 6 years it hurts my back and it not ideal for all types of works the time you have to spend cleaning it assemble and disassemble it didn't work for me

[@kylel3150]

look at the big wigs off to the side

[@juniorchacha7119]

lazy we do it the old fashion

[@hsm8976]

haha 2x4 timber dies the the job. mostly its just one guy on the rake.

[@genecoppedge5972]

Junior Chacha, work smarter not harder, embrace technology.

[@kevingrenville5903]

That would have to sag in the middle being that wide. At least doing it by hand u know u have earned that beer at the end of the day

[@missionDan]

Kevin grenville these guys will be in the bar before youve tamped a 1/4 of that slab

[@smackflack5771]

Shut yo dumb ass up

[@wlehtola]

I doubt it sags much when spinning. Has no time to relax in any one direction very much at all

[@troybrian9251]

Used one many times no sag

[@emiliopaccazocco1556]

Mission Dan vi s

[@miguelolvera9982]

they dont know how to pull concrete yall have to see how we work doing slabs in Atlanta