Your sound examples are fantastic - in particular, the metal musical instrument is a stunning creation - and all very well recorded. The Portacapture device seemed to do very well in your tests.
Would love to see you going over your mastering process! Like the Bass control you often mentioned on your dynamic eq and what to look out for when creating ambience or sound design :D
The X6 seems very promising to me. I like the possibility of being able to use an app for remote control. ... You are per se THE source of inspiration for me - thank you so much for everything! I wish you continued enjoyment in your work, and all the best! Frank
I had considered the X8 some time ago but instead ended up buying the CEntrance Mixerface R4 which has been simply superb. If I ended up buying a second unit, the X6 or X8 would be at the top of my list. However, everyone is currently selling the X8 for $389 which puts it at only $20 more than the X6!
I was looking at buying a Zoom H4N but now....hmm....this lil' X6 fella looks quite promising. Thank you Robert for sharing all of this, I could seriously binge watch your entire channel, it's truly inspiring.
Can I ask did you remove any pre amp noise in post, or the audio is untouched? If so, what audio gain you used, it sounds absolutely clear without any noise, especially comparing to my Tascam DR-40. Thanks!
Great video!! Small question. Can you record line level input without the use of attenuation? I am looking for a recorder to record intercom audio from helicopter… but the signal is very hot!
Thank you Robert for this review. I think I'll try the X6 soon, It's been years since I had anything from Tascam in my rig, but this looks like a good device to have in a backpack. Pozdrowienia!
Nice. Looks like a cool device and will probably sell very well after the very disappointing releases from Zoom (M2 and M4). I see the price is about $369 too, so well priced. Thanks Robert.
You should sell that gun adapter. Thank you very much for the video. As always, very helpful. One question: the sounds we hear in your videos (in this one at least), have some kind of editing, cleaning or processing, or is it "raw" sound from the recorder? Lot of thanks.
Thank You, The sounds are from the recorder, but I play with the levels after recordings and did some edit to keep everything tide and keep video short.
Hi Robert, great video man, thanks! My x6 is underway and I was wondering: what foam is that you use to protect the mics? Is that of a Zoom H6? :-) But it doesn’t say Zoom on it so I doubt.
Great content! I really enjoy your videos and the quality of your recordings is amazing!. What brand is the pistol grip you're using? (with red button). Thank you.
Thank You😊 This is the link to amazon where i got my. Altura Photo Mini Tripod for Camera w/Pistol Grip, Portable Small Tripod for DSLR & Mirrorless Cameras, Mini Tripod Stand w/Anti Slip Feet, Works as Desktop Tripod, Vlog Tripod, Table Tripod a.co/d/0OGCryF
Could you explain me what is the thing you connected to the item wired with a gray cable, I noticed that and can't sleep now without knowing what is it
Thank you for making this video! I make my own samples/foley, so I really appreciated your demo at the end! Do you have access to any SoundDevices MixPre recorders? I'm so curious how the noisefloor between these compares. I love my MixPre3ii, but honestly the X-6 seems to have a few advantages over it (so long as it can sound as good for my purposes). Thanks again!
@@RobertDudzic Does X6 has any self-noisefloor? I wonder how it would pair with: -some $500-1000 XLR shotgun mic -DJI MIC / DJI MIC +MKE2 -Sennheiser MKE2
@@RobertDudzic My X8 still has this issue. I still get the noise. Both line still show up in waveform. I have v1.31 which is latest and I still have the issue. Which update fixed yours?
thanks for the review, enjoyed it really much. I bought one myself after watching your video, was wondering what mode/settings did you use when recording the sound of the film camera? Mine has a lot of background noise, am i doing something wrong?
@@RobertDudzicSame here… I just received mine. I bought the Altura Photo Pistol Grip as You suggested, and now I wanna attach my Sennheiser MKE600 to the Pistol Grip. Can you kindly share links for all the accessories you have used? What is that Windshield Foam? And what accessories should I used to set MKE600 under TS X6? Thanks!
@@RobertDudzic Thank you so much. I'm pretty new to this audio thing. Does it make a difference in quality to record in 192 khz from the x8 to the 96 khz from the x6?
Hi there, thank you for your informative review. I’m also considering buying one of these recorders but I’m not sure which one yet. So I have two questions that I can’t find an answer on yet. 1. The mic capsules on both devices look different. Are they also sounding different? 2. Is the software (and software options) on both the same? Hope it’s oki to ask. Well, have a lovely day and thanks again!
Hello there! It seems like you're discussing the differences between the TASCAM Portacapture X6 and X8 recorders. While the capsules on the X6 may be smaller, they still provide a clean and warm sound that is quite impressive. The X6 and X8 recorders have the same operating system, but the main difference is that the X8 can record up to 192 kHz while the X6 can only record up to 96 kHz. Both recorders have the remarkable feature of being able to record in 32-bit float, which is especially beneficial when recording loud sounds.
Thank you so much Robert. I bought the x6 and I love this little recorder. The mics are very sensitive though so I also got a dead cat thingie now that works wonders! But they indeed sound very good. Good luck on your channel and thanks again!
I am amazed by your creativity! Tell me please, which microphone is better to choose for sound design: rode ntg3 or ntg5? I will be very grateful! P. S. I have a Tascam x8 now. I want to buy a universal shotgun microphone.
Hi, The RØDE NTG3 is awesome mic and I absolutely love but if you planning lot field and location recording NTG5 is perfect, This mic is dust and moist resist and have very nice warm tone. The low end is amazing and this why you see a lot this mic using by me in my recent videos, plus is small and very light.
@@RobertDudzic Hello! I bought the same set of tascam x8 and microphone NTG5. I tried different angled cables and they sometimes make some noises. Can you tell me which angled microphone cable you have (who is the manufacturer). Thank you very much!
I just subscribed to your channel. Am into city walk and I really need audio recorder that can help capture ambient sounds and give better studio quality to make the viewer feel like as if they are there. I really need your recommendation because am almost about to get the zoom h1n before I found your channel.
Hi there! I used to own a Zoom recorder, specifically the H6, H2 and H1, but I ended up selling it on eBay because I found that the sound quality was too digital for my test. When I switched to a TASCAM recorder, I noticed a significant improvement in the quality of my recordings. My clients were also much more satisfied with the results, which has led to me getting more jobs than ever before.
Do You feel diference between stereo mics X8 VS X6? I am planning to use it as field recorder with internal mics. And maybe comparing to Zoom H5, because I tested it recently. Thanks!
X8 or X6 have very similar nice warm tone and the sound is very open with depth in addition 32bit float will give you a lot details in the sound. About H5 I owned H6 a long time ago but for me the sound was very thin and have missing color and depth very sound digital.
I can't get the Bluetooth adapter to accept to the unit?? The window on the unit won't budge ? How did you insert the Bluetooth adapter into the unit? Help
I bought one after watching your video and I just received mine. I bought the Altura Photo Pistol Grip as You suggested, and now I wanna attach my Sennheiser MKE600 to the Pistol Grip. Can you kindly explain and share links for all the accessories you have used? What is that Windshield Foam? And what accessories should I use to set MKE600 under TS X6? Thanks!
Can they be used as a recorder mixer; can i record a drum beat in one channel, and the when i end the drum beat record, can i record an instrument (for example) in another channel while listening at the same time to the drum beat i pre recorded in the other channel??????????????
Would be more impressive from 6 to 8, I also get not so much price difference here (Japan)... That was a nice recording series in the factory!! At 9.10 to 9.20 sounds weird :) also nice expression on your face
Your sound examples are fantastic - in particular, the metal musical instrument is a stunning creation - and all very well recorded. The Portacapture device seemed to do very well in your tests.
Thank You so much😊
I second this!
Would love to see you going over your mastering process! Like the Bass control you often mentioned on your dynamic eq and what to look out for when creating ambience or sound design :D
The X6 seems very promising to me. I like the possibility of being able to use an app for remote control. ... You are per se THE source of inspiration for me - thank you so much for everything! I wish you continued enjoyment in your work, and all the best! Frank
Had no idea Tascam were coming out with an X6. X8 is awesome.
Thank You, X6 is fantastic.
I had considered the X8 some time ago but instead ended up buying the CEntrance Mixerface R4 which has been simply superb. If I ended up buying a second unit, the X6 or X8 would be at the top of my list. However, everyone is currently selling the X8 for $389 which puts it at only $20 more than the X6!
I just learned about what a tascam is this weekend, found your channel by chance. Always interested in new ways of making sound.
I was looking at buying a Zoom H4N but now....hmm....this lil' X6 fella looks quite promising.
Thank you Robert for sharing all of this, I could seriously binge watch your entire channel, it's truly inspiring.
Thank You😊
I have a hell of a question. When recording 32-bit float, does the signal "remain" 32 bit if I was to go line out into a camera?
Can I ask did you remove any pre amp noise in post, or the audio is untouched? If so, what audio gain you used, it sounds absolutely clear without any noise, especially comparing to my Tascam DR-40. Thanks!
Lovely overview and demo. The pre's sound good. Thank you!
Thank you, glad you like😊
Great video!! Small question. Can you record line level input without the use of attenuation? I am looking for a recorder to record intercom audio from helicopter… but the signal is very hot!
Thank you so much for this video! I have been looking for a simple device to get into this world with and i think you just helped me find it!
What pistol grip did you use? :)
Thank you Robert for this review. I think I'll try the X6 soon, It's been years since I had anything from Tascam in my rig, but this looks like a good device to have in a backpack. Pozdrowienia!
You will like😊 Pozdrawiam😊
Nice. Looks like a cool device and will probably sell very well after the very disappointing releases from Zoom (M2 and M4). I see the price is about $369 too, so well priced. Thanks Robert.
@@RobertDudzic That is great to hear! X6 has nice form factor but I want 192kHz, so X8 now looks very tempting.
Thank You.
@@shapelesscube The form factor is great, but I just bought a Zoom F3 so I can't justify it right now. Maybe sometime in future to replace my Zoom H6.
@@cryptotrader2779 I have ZOOM H6 and did lot recordings but but the come the time for change and I switch to TASCAM.
You should sell that gun adapter. Thank you very much for the video. As always, very helpful. One question: the sounds we hear in your videos (in this one at least), have some kind of editing, cleaning or processing, or is it "raw" sound from the recorder? Lot of thanks.
Thank You, The sounds are from the recorder, but I play with the levels after recordings and did some edit to keep everything tide and keep video short.
@@RobertDudzic Thanks, Robert. I love your work.
Hi robert . I want to record car races on the track (not only), what do you propose for the X6 or X8, what should the set look like?
Where did you get the great foam protector for the X6?
Thank you for sharing these amazing sounds! What kind of contact mic were you using when recording those machines in the garage?
Thank You. I use LOM Geofon
Hi Robert, great video man, thanks! My x6 is underway and I was wondering: what foam is that you use to protect the mics? Is that of a Zoom H6? :-) But it doesn’t say Zoom on it so I doubt.
Great review!
Thank You
How far away can you get with the bluetooth app control?
Nice sound creating :)
Why is it that when an external microphone is connected to the xlr input, a small signal indication lights up on the other input (input is disabled)?
Great content! I really enjoy your videos and the quality of your recordings is amazing!. What brand is the pistol grip you're using? (with red button). Thank you.
Thank You😊 This is the link to amazon where i got my. Altura Photo Mini Tripod for Camera w/Pistol Grip, Portable Small Tripod for DSLR & Mirrorless Cameras, Mini Tripod Stand w/Anti Slip Feet, Works as Desktop Tripod, Vlog Tripod, Table Tripod a.co/d/0OGCryF
Thanks Robert! Have great day.
Also I see you have an inline attenuator for the LOM going into the X6. How much attenuation do you usualy need? Thank you.
Thanks for the informative video. Can you provide me a link for the pistol grip and microphone mount?
Could you explain me what is the thing you connected to the item wired with a gray cable, I noticed that and can't sleep now without knowing what is it
Thank you for making this video! I make my own samples/foley, so I really appreciated your demo at the end! Do you have access to any SoundDevices MixPre recorders? I'm so curious how the noisefloor between these compares. I love my MixPre3ii, but honestly the X-6 seems to have a few advantages over it (so long as it can sound as good for my purposes). Thanks again!
Thank You so much. I don’t have any SoundDevices.
@@RobertDudzic Does X6 has any self-noisefloor? I wonder how it would pair with:
-some $500-1000 XLR shotgun mic
-DJI MIC / DJI MIC +MKE2
-Sennheiser MKE2
Does this have the same ultrasonic issue as the x8?
I want to know too, just a bit sad that they only went for 96kHz....
192kHz and no Ultrasonic issue, instant buy!
No😊
@@shapelesscube I'm thinking they only went to 96khz to get rid of ultrasonic issue.
@@CameraRay Both recorders X6 and X8 are free of any ultrasonic noises. X8 was quick fix by update.
@@RobertDudzic My X8 still has this issue. I still get the noise. Both line still show up in waveform. I have v1.31 which is latest and I still have the issue. Which update fixed yours?
thanks for the review, enjoyed it really much. I bought one myself after watching your video, was wondering what mode/settings did you use when recording the sound of the film camera? Mine has a lot of background noise, am i doing something wrong?
Thank You, I’m on manual mode, like to control my levels. I record all 96khz 32bit float.
@@RobertDudzicSame here… I just received mine. I bought the Altura Photo Pistol Grip as You suggested, and now I wanna attach my Sennheiser MKE600 to the Pistol Grip. Can you kindly share links for all the accessories you have used? What is that Windshield Foam? And what accessories should I used to set MKE600 under TS X6? Thanks!
do I see correctly that you don't use suspension for the recorder and microphone? don’t you have problems with handling noise and vibrations?
thanks for this excellent video! would you say that the audio quality compared to the x8 is basically the same?
The same, the audio was recorded 96khz 32bit float
@@RobertDudzic Thank you so much. I'm pretty new to this audio thing. Does it make a difference in quality to record in 192 khz from the x8 to the 96 khz from the x6?
What microphones do you use and wich would you recomment for beginners?
Hi there, thank you for your informative review. I’m also considering buying one of these recorders but I’m not sure which one yet. So I have two questions that I can’t find an answer on yet. 1. The mic capsules on both devices look different. Are they also sounding different? 2. Is the software (and software options) on both the same? Hope it’s oki to ask. Well, have a lovely day and thanks again!
Hello there! It seems like you're discussing the differences between the TASCAM Portacapture X6 and X8 recorders. While the capsules on the X6 may be smaller, they still provide a clean and warm sound that is quite impressive. The X6 and X8 recorders have the same operating system, but the main difference is that the X8 can record up to 192 kHz while the X6 can only record up to 96 kHz. Both recorders have the remarkable feature of being able to record in 32-bit float, which is especially beneficial when recording loud sounds.
Thank you so much Robert. I bought the x6 and I love this little recorder. The mics are very sensitive though so I also got a dead cat thingie now that works wonders! But they indeed sound very good. Good luck on your channel and thanks again!
I am amazed by your creativity! Tell me please, which microphone is better to choose for sound design: rode ntg3 or ntg5? I will be very grateful! P. S. I have a Tascam x8 now. I want to buy a universal shotgun microphone.
Hi, The RØDE NTG3 is awesome mic and I absolutely love but if you planning lot field and location recording NTG5 is perfect, This mic is dust and moist resist and have very nice warm tone. The low end is amazing and this why you see a lot this mic using by me in my recent videos, plus is small and very light.
@@RobertDudzic Thank you very much! You helped me a lot!
@@RobertDudzic Hello! I bought the same set of tascam x8 and microphone NTG5. I tried different angled cables and they sometimes make some noises. Can you tell me which angled microphone cable you have (who is the manufacturer). Thank you very much!
Where can one get the metal musical instrument? Fascinating sounds and possibilities.
Thank you
Sir how u smooth the sound FX having more annoying frequencies like vehicle
I just subscribed to your channel. Am into city walk and I really need audio recorder that can help capture ambient sounds and give better studio quality to make the viewer feel like as if they are there.
I really need your recommendation because am almost about to get the zoom h1n before I found your channel.
Hi there!
I used to own a Zoom recorder, specifically the H6, H2 and H1, but I ended up selling it on eBay because I found that the sound quality was too digital for my test. When I switched to a TASCAM recorder, I noticed a significant improvement in the quality of my recordings. My clients were also much more satisfied with the results, which has led to me getting more jobs than ever before.
@@RobertDudzic That sounds nice to hear . So which of the TASCAM will you recommend for someone like me on budget and for travel vlog / City Walk .
hi, I would like to ask about the hand grip you use around 07:20, what is it?
Hi! What is the device between the Geofon and the Tascam? thx!
Hello, thank you for the video!
Does anyone have the model of the handle used?
You can found this at Amazon, look for dslr camera pistol grip, the is a lot to chose.
Oh okay I see, thank you for your response ! @@RobertDudzic
Do You feel diference between stereo mics X8 VS X6? I am planning to use it as field recorder with internal mics. And maybe comparing to Zoom H5, because I tested it recently. Thanks!
X8 or X6 have very similar nice warm tone and the sound is very open with depth in addition 32bit float will give you a lot details in the sound. About H5 I owned H6 a long time ago but for me the sound was very thin and have missing color and depth very sound digital.
Is it true that the mics are non removable and the jack sockets cannot be used?
You cannot remove the mics on top. So, no hidden 3.5mm jacks which is a bummer. I do like that you can move the mics directions though.
@@malikdod4773 I will skip this device then. The X8 is good enough for me.
X8 is next step with more futures.
Thank you for the video! In your opinion, is it worth paying the extra €100 for the X8?
Absolutley😊 X6 is fantastic but X8 have more inputs and record in 192khz, rest is the same. 😊
I can't get the Bluetooth adapter to accept to the unit?? The window on the unit won't budge ? How did you insert the Bluetooth adapter into the unit? Help
Please contact tech suport.
I bought one after watching your video and I just received mine.
I bought the Altura Photo Pistol Grip as You suggested, and now I wanna attach my Sennheiser MKE600 to the Pistol Grip. Can you kindly explain and share links for all the accessories you have used? What is that Windshield Foam?
And what accessories should I use to set MKE600 under TS X6?
Thanks!
I have design 3D print mount for X6.
@@RobertDudzic Can I buy one? If not any available solution for me? what is that windshield foam? Thank you…
Amazing!!! Please tell me which holder (handle) for the recorder you use? Thank you!
Thank you. I left the link in the cements
@@RobertDudzic Sorry, I don't see the link to the handle on my Android phone.
Super
😊
What exactly is stuck against the items being recorded? A transducer?
Attenuator
@@RobertDudzic now I’m more confused lol. Ok can you send me a link to one? Is there anything else attached after the attenuator?
Can they be used as a recorder mixer; can i record a drum beat in one channel, and the when i end the drum beat record, can i record an instrument (for example) in another channel while listening at the same time to the drum beat i pre recorded in the other channel??????????????
Maual😊
🔥🔥🔥🔥🔥
😊
ale czy on jest lepszy pod względem szumów własnych ? bo X8 ma problemy... czcams.com/video/ryWlHvm3rk4/video.html
This problem was fix a long time ago.
Too bad It does not have XLR/jack combo :-(
Well… I miss this option to.
why so much bass? impossible to listen
Sorry You don’t like, I like my sound to be fat, every one have different taste 😊
Would be more impressive from 6 to 8, I also get not so much price difference here (Japan)... That was a nice recording series in the factory!! At 9.10 to 9.20 sounds weird :) also nice expression on your face
Thank You