Amazfit GTR flashing dark screen problem solved repair battery dead long usage looping issue boot

Sdílet
Vložit
  • čas přidán 11. 09. 2024
  • Finally I have recognized, that the original in box charger cable had to be changed (repaired) due to very bad built quality and was not able to charge the watch.
    I highly recommend to you to do the same. I have no more problem anymore.
  • Věda a technologie

Komentáře • 19

  • @ynbroslboy2302
    @ynbroslboy2302 Před rokem +2

    *thank you verry much..!!*
    *it's worked*

  • @sajeenashamilshamil9308
    @sajeenashamilshamil9308 Před rokem +1

    Thank you ❤❤❤❤❤ my watch working❤❤❤

  • @zaimshukri7257
    @zaimshukri7257 Před 2 měsíci

    working working letsgooo thanks

  • @ynbroslboy2302
    @ynbroslboy2302 Před rokem +1

    great video

  • @dysjsshsjsj1848
    @dysjsshsjsj1848 Před rokem +1

    Works great on amazfit gts

    • @levisolymosi8438
      @levisolymosi8438  Před rokem

      Happy :-) I had to change the original charger cable. With new one works perfectly. The cable original attached in the box was a crap after some months. :-(

  • @ynbroslboy2302
    @ynbroslboy2302 Před rokem +1

    thanks

  • @ynbroslboy2302
    @ynbroslboy2302 Před rokem +1

    👍👍👍👍

  • @SPAN25
    @SPAN25 Před 5 měsíci

    Few months before, my Amazfit gtr started taking too much time to charge fully (about 10-12hrs). Sometimes don't even see any progress in charging for the first few hours. After couple of weeks it only shows charging animation but won't charge. Finally the charge on the watch completely discharged. Now when I keep to charge the watch, no charging animations are seen (blank screen) but after couple of hours, amazfit logo will start blinking at regular intervals. What could be the problem? Please reply🙏

    • @levisolymosi8438
      @levisolymosi8438  Před 5 měsíci

      Change the original charging cable. It looks like it has bad wireing and falls to charge with age.

    • @SPAN25
      @SPAN25 Před 5 měsíci

      @@levisolymosi8438alright. thank u🙏.

    • @SPAN25
      @SPAN25 Před 5 měsíci

      I checked the charger volt with the multimeter. It shows 5.14volts. Does that mean the output power is enough?

    • @levisolymosi8438
      @levisolymosi8438  Před 5 měsíci

      @@SPAN25 yes it is enough. Do you measure at charger or at the end of the charging cable? However it can happen if the cable is faulty unloaded voltage is enough, but if you connect the watch the current drop will be high and the voltage falls in that case. Seriously I propose to check with other cable I did it same and now I have no charging problem.

    • @user-uk7dz7ip4r
      @user-uk7dz7ip4r Před 11 dny

      czcams.com/video/YCgJbtk2DiM/video.html

  • @microtec5384
    @microtec5384 Před rokem

    My firebolt have same problem

  • @M.N.S.N
    @M.N.S.N Před rokem +1

    Its work! But charge after on, very slowly. I try to charge 24H. Battery still in 6% . Im so confuse

    • @levisolymosi8438
      @levisolymosi8438  Před rokem

      I had to change original charger cable. The factory given cable is a s...t.

  • @user-uk7dz7ip4r
    @user-uk7dz7ip4r Před 11 dny

    czcams.com/video/YCgJbtk2DiM/video.html

  • @rileymclain9851
    @rileymclain9851 Před rokem +1

    🙋 𝐩𝐫𝐨𝐦𝐨𝐬𝐦