Toyota Corolla Control Arm
Vložit
- čas přidán 3. 09. 2022
- 2015 Toyota Corolla Driver Side Control Arm Replacement
I am not a professional technician, nor a certified ASE. I only work on friends and family members' cars. This is not a tutorial video, it is for reference and entertainment purposes only. Do your research and attempt at your own risk. Thank you.
Music from Uppbeat (free for Creators!):
uppbeat.io/t/cruen/family-time
License code: LUGXBLPTBZMSG6C8 - Zábava
Great video, straight to the point, no unnecessary commentary.
This is the same procedure I had to do on a older model Matrix - both sides. All the bushings were gone and sway bar links. Pain in the neck. And no, dropping the oil pan does not give enough room for the bolt to come out. Props to you for doing such a big job.
Maybe dropping the pan doesn’t help on the Matrix but does on the Corolla. It looks like it will.
@@yactabay Let me know how it goes.
@@rabudman Who knows when I’ll get around to it. I may not remember this post by then.
I dropped my pan before watching this video
I had no choice
I had to pick to pick a struggle
Tear it down from the top down or tear it up from the bottom
I choose to get a a new control arm and a fresh trans oil change at 190k miles
Remove tire, spray all bushings with a silicone based grease or rub some on. I found the spray easier. Noise is gone. We'll see how long it lasts.
I recently picked up a 16 Corolla with the same noise issue. Couple vids here on youtube where guys just greased all the bushings and it went away. One comment mentioned using a silicone based grease was better as it wouldn't damage the rubber over time.
This noise is a known issue at Toyota but Corporates' position is to deny and try to sell you a $$$ repair. BTW it's usually that rear bushing making the noise but can be both.
I’ve been looking for a guide on a 2015 Corolla. Thanks man!
I' ve got that same problem can' t wait to get my car fixed and you did it sooo fast woow!
Yeah, it only took him 20 minutes and 49 seconds😂
Great video bud 👍🏻
Super film
I am doing this job right now 2024.02.04. Luckily i have a 2000 corolla and i dont have a clearance issue with the bolt that requires raising the engine.
Removing spanner size plese 😊
What are the size wrench bits did you need ?
Hello! How good is the quality parts from TRQ? Do you recommend those control arm replacement? Thanks!
In my opinion, TRQ products are not good but it cheap so you get what you pay for. Brake rotors will pulsate after few month, sway bar link doesn’t last long, wheel bearings goes bad after few month, brand new shock doesn’t make any difference. These are some of the patterns I noticed using TRQ brand. If you have the budget and don’t want to do the same job two or three time, I would go with popular brand.
@@Taohmoo Thanks for your feedback!
Tayota verso same 2010 model valavematick
Hi What is the reason you changing it, the car is relatively new. Does the control arm have noise due to bad bushing? Thanks in advance.
Bushings making noise when came to stop or accelerate, not a safety issue
@@Taohmoo Thanks for the information. I think my 09 Corolla making those noise and I just checked and I also need to raise up the transmission. 😭 but thanks for the video. 👍
Dropping the subframe 4x bolts about an inch wil do it. no need for all that extra nonse😅
Yep ur right
I am a do-it-yourselfer. Horrific that you had to go up to the top of the engine bay to remove those two parts thanks to a bolt that won’t come out. Oil pan removal with new gasket is almost a better option. It’s debatable. Make me sick as I have the same noise and happens on bumps, dips, stops, etc.
It is better
It happened to me before I saw this video
I install the new control arm and fresh transmission fluid
did you got any issues with alignment? noise went away ?
The noise went away, and I don’t have any problem with alignment but it doesn’t hurt to get alignment done after.
Bro where did you buy control arm
Online on EBay
Casi tienes que desarmar el pinche carro , solo para reemplazar el control arm 😏 se mamaron los ingenieros con esto
I’m thinking that the one you took out should be in better shape than the one you put in after that beating. Thanks for the video though.
Doing it wrong.