my fiance used Instant Pot without reading instructions, and he tried to cook some meat with liquid in the pot, the valve (silver button) wouldn't come up, so my mom said to make sure valve and pressure is released, wait for 30 minutes and you can UNPLUG your instant pot, let the contents cool down before you try opening the lid, do not burn yourself and don't force the lid to open, dont yank it with force. I thought the silver button was faulty as i checked later, but it was not, i just kept poking it in with a knife to ensure that pressure was indeed released and i plugged the pot back in as i tried opening the lid by shifting it left and right (yes the noises were annoying) but it did safely open without much force, it's just that if you cook something with a liquid content, it is bound to seal the lid like a cup seals to the glass table if you don't use a coaster. So thank you for this video, I was able to finally open my lid as well and it just takes Patience :) BE Patient and DONT give up on the pot, our food was yummy!
Tried all your tricks and worked wonderfully well! If not for your video I would have had to throw the entire instant pot away! Thank you for doing this
Thanks, this helped. 👍😄 In between, the vent was clogged with batter. Pours some very hot water down the vent. Water helped unclog the vent and then continued releasing the pressure from within.
Wow! THANK YOU! I didn't lock my lid properly. I thought it would be fine, then it cut off. Well, your video helped me so much. I didn't want to loose two packs of Corn Beef. I ended up transferring everything to my Crockpot due to my IP not powering back on. So glad it didn't explode. I was on my way to the backyard with it lol.
You were on the right track when you were pushing in the valve. The side pin and the valve are interconnected. If the valve is not all the way down, the side pin will not slide. Thank you for your help.
Thank you for posting this video! Even though I do not have an InstaPot or Instant Pot, this video has helped me to figure out a way to release the stuck sealing ring to my Mirro Pressure Canner. Because I was able to turn the lid to a certain position, I was able to release it the rest of the way by using the prying end of a hammer. It took some patience as you mentioned in the video; however, after persistently putting forth the effort, it began to slowly turn the rest of the way allowing me to be able to remove the lid! Prior to watching this video, I was very close to just throwing my pressure canner in the trash! Thanks again for sharing!!!
Thanks it worked for me. I add an additional thing of shaking the whole instant pot for a while and then pressing the pressure value, it helped release the gases faster. Repeated the process a few times till all pressure was released.
Thank you soooo much!!!! I received my new cooker 2 days ago and the lid got stuck. I was about to send it to another country by mail with my jars inside when I saw your video. Thank you so much! 😘😘😘
Thank you so much for this video!! My parents were desperately trying to get it off and they were struggling so much. But the moment I showed them this video my mom did what you did and it worked and they looked at each other in disbelief! It was an amazing sight to look at as they could have just simply looked up a video on how to fix this problem. 😂 So thank you again for this video.
Thanks you are great! it help me a lot I did exact what you did the very first 2 things after 2 hours after watching some other videos that dint do anything for me I came accrosed w u video and Bingo the 3Rd step its what I was missing
I got 9ne for my birthday in February and never used it I took it out the box to use it and not only is the direction in pot I can't figure out how to get the life off
Thanks for this video, Mines was completely sealed and wouldn’t unlock & I started to panic! Your video came “Right On Time!” Lol
It worked! Thank heavens! I tried for hours!!!!
my fiance used Instant Pot without reading instructions, and he tried to cook some meat with liquid in the pot, the valve (silver button) wouldn't come up, so my mom said to make sure valve and pressure is released, wait for 30 minutes and you can UNPLUG your instant pot, let the contents cool down before you try opening the lid, do not burn yourself and don't force the lid to open, dont yank it with force. I thought the silver button was faulty as i checked later, but it was not, i just kept poking it in with a knife to ensure that pressure was indeed released and i plugged the pot back in as i tried opening the lid by shifting it left and right (yes the noises were annoying) but it did safely open without much force, it's just that if you cook something with a liquid content, it is bound to seal the lid like a cup seals to the glass table if you don't use a coaster. So thank you for this video, I was able to finally open my lid as well and it just takes Patience :) BE Patient and DONT give up on the pot, our food was yummy!
God bless you! I thought I was going to have to pitch out my 6 quart instant pot and a full batch of chili. I'm very thankful to you for posting this.
Tried all your tricks and worked wonderfully well! If not for your video I would have had to throw the entire instant pot away! Thank you for doing this
Worked with same issue.. Lesson learnt, won’t keep idly batter in the pot on summer days.. Thank you so much
Thanks, this helped. 👍😄 In between, the vent was clogged with batter. Pours some very hot water down the vent. Water helped unclog the vent and then continued releasing the pressure from within.
Wow! THANK YOU! I didn't lock my lid properly. I thought it would be fine, then it cut off. Well, your video helped me so much. I didn't want to loose two packs of Corn Beef. I ended up transferring everything to my Crockpot due to my IP not powering back on. So glad it didn't explode. I was on my way to the backyard with it lol.
You were on the right track when you were pushing in the valve. The side pin and the valve are interconnected. If the valve is not all the way down, the side pin will not slide. Thank you for your help.
Thank you for posting this video! Even though I do not have an InstaPot or Instant Pot, this video has helped me to figure out a way to release the stuck sealing ring to my Mirro Pressure Canner. Because I was able to turn the lid to a certain position, I was able to release it the rest of the way by using the prying end of a hammer. It took some patience as you mentioned in the video; however, after persistently putting forth the effort, it began to slowly turn the rest of the way allowing me to be able to remove the lid! Prior to watching this video, I was very close to just throwing my pressure canner in the trash! Thanks again for sharing!!!
Thanks it worked for me. I add an additional thing of shaking the whole instant pot for a while and then pressing the pressure value, it helped release the gases faster. Repeated the process a few times till all pressure was released.
Thank you soooo much!!!! I received my new cooker 2 days ago and the lid got stuck. I was about to send it to another country by mail with my jars inside when I saw your video. Thank you so much! 😘😘😘
Mine got stuck before I could even use it
Thank you so much for this video!! My parents were desperately trying to get it off and they were struggling so much. But the moment I showed them this video my mom did what you did and it worked and they looked at each other in disbelief! It was an amazing sight to look at as they could have just simply looked up a video on how to fix this problem. 😂 So thank you again for this video.
Thank YOU so much! I was gonna dump my instant pot and your video saved my instant pot
Thanks alot, I put dal and rice and it was full, I was about to die of starving and you just saved my life. ♥️♥️
Thank You... that little bugger would not go down and it was driving me crazy. Your advise worked great.
Thank you so much for this video …. Stuck with same problem due to the batter and your video helped to resolve the issue ❤️
You just saved us on our first dinner with the instant pot. Thank you so much!!!!!
Thank you this was very helpful
Thank you so much as same happened with me and I also put my Idli batter in it got locked but your tips were helpful 😊
Thank you so much, your video was the most useful out of all. I followed your advice and open mine without any problem. 🎉
Thank you had a similar problem looked up and found this video which solved the issue 👍
Thank you so much it was very helpful
Thank you. You were the only one I found. It worked like a charm!
Thank you Arathi. This was so helpful this morning 😀
Thank you so much,my lid just get stuck.and it works now after used your tips👍
ABSOLUTELY THANKFUL TO LOCATE AS MY POT IS STUCK , I BELIEVE IT JUST HASNT RELEASED PRESSURE.. BUT DIDNT KNOW ABOUT REMOVING
Got the same problem with my idly batter and this video saved my day.... thank you so muck akka
This is such a helpful video!! Thanks !!
You are a life saver! Thank you so much
Very helpful. Thanks for the video!
Omg thank u so much it’s been 5 hours since it got stuck !! This opens it ❤
Thanks, I faced the same issue with batter and was going to try this anyway, but wanted to know how careful do I need to be 😂
OMG you saved my Philips Electric pressure cooker. Tons of thanks.
THANK YOU THANK YOU. I'm currently going through this problem. Dont know if I'm gonna resolve. Fingers crossed.
Thank you so much. I was getting so frustrated I almost snapped
thank you I was about to use a hammer to break it open thanks to you may money is not wasted
Oooh, thank you very much,, it worked, a was afraid to death, of what to tell my boss
THANK YOU SO MUCH SISTER
Tried this and it worked!!!!! Thanks for video!!!
This video was a great life saver
Yes I did face these problem today Thankuu so much for vedio
Thank you so much, you saved me !
Thank you!! It worked!🙌🙌
Thank you so much 👍
Very helpful. Thank you.
Thanks you are great! it help me a lot I did exact what you did the very first 2 things after 2 hours after watching some other videos that dint do anything for me I came accrosed w u video and Bingo the 3Rd step its what I was missing
Practical and very useful video.
Thank you soooo much !!!!
Thank you ! It worked 😁
For how long did you have to keep pushing that pressure release valve?
it worked, thanks!
Thank you!
Thank you for the useful video 😊
thank u very much sis
Thanks! I needed this on the spot
Thank you for your video. You saved my day!!!!
Thanks for sharing
Thanks, I needed that 👍👍
THANK YOU
Very useful video!! Keep it up 👍
Thanks you!! Really helped me today!!
Thank you!!!! This worked!
Thank you. It helped me
Just had this issue the first day I bought it, thank you so much I was so scared I did something wrong!!!
THANK YOU SO MUCH
I pressed the tiny silver button and my lid unlocked 🥹 First time using it and I made bone broth.
Omg!!! I just did and it work for m. Thank you!!
Thank you so much. This really works!!
Thx it's worked
THANK YOU! THANK YOU! THANK YOU!!
Thank you I now I can get my roast out of it
Thank you worked on mine
Don’t ever do this!! Incredibly dangerous!
I got 9ne for my birthday in February and never used it I took it out the box to use it and not only is the direction in pot I can't figure out how to get the life off
IS THE SEAL INTACT?
This is like a nightmare
thanks it worked!
Who puts batter in a pressure cooker 😆 🤣 😂 😹 no wonder it's everywhere 🤔
Just read the instructions. It’s not that complicated.
bro your counter is a mess
steam+bare hand=disaster.
Faster way remove the float valve...
Thank you so much 💞
Thank you!
Thanks so much !!!!!!