Clutch install on GTO - In the shop with Emily EP 16
Vložit
- čas přidán 24. 07. 2024
- RoxyGTO was in need of a clutch, it made sense to work with Mantic Clutches from Australia, the place where Roxy was born as a Holden Monaro! In this episode with the help of my awesome hubby Aaron, I install my Mantic 9000 Series twin disk clutch!
www.compcams.com/
www.fuelairspark.com/
www.continentaltire.com/
www.ridetech.com/
www.tciauto.com/
gibsonperformance.com/
www.hotrod.com/
What a great shop. So much energy you guys have. The power of editing , LOL
Seeing how I'm getting a new clutch on my 05 GTO this week, this video helped me see and know what all is going to happen. Nothing like learning! You rock Emily!
wow never knew they had 2 section drive shaft, btw some feel yoke should be marked at the diff to put in same clocking as it came from factory but if it vibrates you can always re-clock it.
Way to go Emily, Roxy is back on the road. I'll have to look into that clutch when the time comes. Thanks.
You guys make excellent videos, interesting, informal and informative. keep them coming, especially the classic re-dos.
You're amazing! Love watching your videos regarding Roxy😍😍
Awesome seeing a lady interested in cars. Mantic are from my home town. This place seems to be making a lot of killer Ford/Chev perf gear now.
Cool channel Emily. The real deal.
Good job on your selection, I've never even heard of Mantic until I saw your video
Great video, thanks! Just bought an 04 GTO, will be replacing the clutch next weekend. Cheers!
Keep it up Emily!! Doing a great job! Would love to see more detail as you have time. I know this is a sideline would love to see you get more sponsors so you could go full time. Good luck and keep it up!
Lol, that was fast. You're awesome, I'm actually in the process of installing a twin disk in my GTO
Ah, nice! A Mantic as well? I enjoyed the modular install experience!!
Found this show through Roadkill FB, or DF FB, can't remember, anyway, good show! Well done you guys!
Nice clutch, great video!
Finally a u tuber pulling the trans and then the bellhousing... thought i was going crazy watching all the others.nice video thank you
Never gets old watching this I never knew abought mantic clutch ppl I know a guy at monster clutch so just went with that 1 😎
awesome set up
Pleasantly entertaining and informative.....
Hi from Australia
I just spent 2 years in USA flying for American Eagle out of Phoenix Skyharbor and DFW. I went it Oshkosh 2017- 2018. Lol
Great Video!
Best video so far, in my modest opinion. I like the 15mn format, the short intro, more tech detail, I love to see diferent cars nd how they have been put together. Good job.
On a side, what are you supose to do with the clut h fancy case when you finish with the install? My guess carry a spare one in the trunk to show off, it is a beatiful peace of kit. The Aussys going over the top as usual.
Great video! I just installed a Mantic 9000 series twin disc in my C6 Z06, but won't be able to do my break-in miles until my new intake port seals come in for my intake manifold. Pedal effort after a good bleed seems about like my stock LS7 clutch. How do you like the engagement of the clutch? Easy to drive? I'm excited to get my break-in miles done, and hope the car is as drivable as it was on the stock clutch.
Side note, we found this Mantic is a full 20lbs lighter than the stock unit!
Cool car love look of the Gto I have Fj cruiser would love to have a black one
Great job!
How did you align the splines on the two friction plates?
I got a Mantic as well couldn't effort the twin disk. Im jealous, where did you get that AN fitting line that you disconnected going to your slave? I would like to do the same.
did you replace the throw out bearing and i missed it?
Great video. You are a real talent Emily, you´re an excellent mechanic.
I was looking for Clutches for an LS engine swap for my Camaro about 5 years ago and I found Mantic. Dual disk clutches.. I thought they were a better set up than most Brands.. I think there is a Brand based in TX called Monster that has a rather bad reputation.
Modular means that you have to use the Mantic Flywheel too. They require a steel flywheel at the Drag strict and a Heavy thick steel bell housing too.
Emily, what is the wheel setup on Roxy? Size of wheels and backspace and rubber size? I love the looks of her stance and i'm gonna have to get something new for mine. The ones that came on It is the wrong offset and rub on every bump. Thank you so much and thanks for sharing all your videos that y'all do.!
gday Emily awsome to see a chick get in and get her hands dirty :) i have only just found your you tube channel and am enjoying your content from accross the pond here in australia, also good to see you driving a aussie build car the holden monaro here , pontiac gto there, keep up the great work and keep learning
I have 2002 z28 and just got a GTO T56 because i was misinformed the rear mount shifter and the slightly shorter output shaft is not gonna work in my F body ....Do you know if I can just get a steel drive shaft cut made and welded a little longer from summit ? Or do I really have to have a shop put in Fbody output shaft in so I can use the stock 41.75 in driveshaft Any help Much Appreciated
nice install. quick question....you have an electric impact gun, which you seemed to have used for the flywheel to crank bolts. Why didn't you use it more as opposed to doing it by hand? I certainly understand hand tightening, but to get it apart i personally prefer to use the air/electric tools. Looking forward to more vids
Two words: tool sponsor. 😂😂 You're completely correct, it's much faster and easier to use the air tools! Maybe someday I'll get some air guns from them! 😉 Thanks for the support!!!
I would love to have that sonic tool set
You're nice to look at but could we please see more of what your doing?
Brian Turner I agree
Dude movie stars wear contacts. Ha, Ha, Ha,... but I guess I'm just tougher than anyone else,.. because I worked in a machine shop 30 years and wore the safety glasses in my rear pocket,.... until the plant manager rolled by.
But machine shops are safer places,... But cars are like rust bombs,....a welding helmet with clear glass if your beating on shit.
yep sold i'm buying the Mantic m922219 kit for my hsv gts300 cant wait!... and damn where do i find a Awesome chic like Emily here in oz? :D
Nice video.. One question does the extra hole on the flywheel matter as far as orientation go. I noticed it went from the 7oclock to the 4 oclock with out any description on it. Just curious as ill be installing one soon enough. Thanks
Hey there! I am unaware of the significance of the hole! (I watched the install video provided by Mantic, they make no mention of it, either!) I did move in the video because a felt one of my bolt heads slide out of the channel so I had to pop it back off real quick and tap it back in! 😊👍🏼
+Emily Williams bucket list number 28 Emily replied to my comment. Haha. Thanks for the reply. I appreciate the information and all other videos. 👍
+Garmans12valve Oh gosh, you're a funny one!!!! I had a few typos up there- ugh. Kinda half asleep editing more video! Suspension on the Impala, coming soon! Keep watching bud! Appreciate ya!
For the flywheel did you use the factory flywheel bolts?.
There are impact that make a big difference
Proper well done that girl Emily
OMG I’m in love💕😍
Where and what size bolts did you use to push the bellhousing off? I'm stuck.... I've been laying under my car for 3 days beating it. I'm about to empty a jar of moonshine in the driver seat and burn this thing to the ground
i only ask because I've heard they are a pain in the patoot and if you have any tricks for that
Just checking on the longevity of your Mantic 9000 clutch? I'm on their website and there are several variations of the Mantic 9000 series clutch..?
how many bolts are on the transmission
With eyes as gorgeous as yours I would be wearing safety specs lol. Great show tho. My girl is like your twin but with dark hair. I just wifed her because she enjoys spending time in the shop. Keep it up
Hey Emily my names Jesse I just started beefing up 04 old dirty Billy goat. I watched a few of your videos when I was doing my heads/cam was interested in how you got sponsored to help build your car or where to start.
are you still running the oem driveshaft?? o.O
Do you know where I can find that SAP for my front bumper?
Yes! www.GTOG8TA.com!
Well done! Pretty easy to drive on given the necessary requirements needed for the GTO's power range?
Drive ability is ahhhhsome!!!! My last clutch was an LS7 and I was sad to see it go because it was so nice to drive, but this one is GREAT!
+Emily Williams yeah from what I've read/seen Mantic makes some awesome stuff, pretty neat setups too. Was introduced to them through the guys at MightyCarMods on their other channel when they had a friend do a turbo V8 Stagea build, seems like they make product for all kinds of rides. Keep up the good work 👍
You should come to Australia for summernats
Finally!!!! what took so long!
Harharharrrrrr 😂😂😂
+Emily Williams you guys did a fantastic job.
Great video, and I will check out Mantic for my WS-6 Vert.
Just a FYI, be careful holding the head of a torque wrench while tightening, It can throw off the accuracy .
And can someone sponsor her air tools!!
+Steve Cox And not holding the torque wrench head with throw it off even more, if you can get anywhere close before ot rounds the head from falling off.
How are you liking the clutch? Pros/Cons? Is it organic material or cerametallic?
Ceramic.
What kind of lift is that?
Love this couple. Get it
brendon chase Appreciate all the support, man!
Sweet as, enjoy your journey's along with Aaron. Really like the recent one with Zen and Aaron's test drive.
LOVE IT
Any plans for a 1-piece driveshaft?
I certainly want to replace my stocker, yes!!!
Why, some claim that Two piece shafts are physically Stronger?!
how rough was the flywheel removal really haha, you have to lock the pulleys or did Aaron hold them?
No crazy editing there other than speeding it up! It was actually a pretty smooth removal for once!!
+Emily Williams nice, always a plus! Torquing mine to 105ftlb was a bear with the motor on the ground twisting an spinning the shaft.
+Will Tyree I always put a break over bar on the crank bolt to hold the dang thing in place!!!
+Emily Williams see its all skills, an tools haha lots of tools
Hey guys had a quick question. I've got an 06 GTO with a Hendrix stage 3 clutch in my car and it's killing me cuz of this damn traffic in the ATX, I'm seriously considering a Mantic clutch but was wondering what the pedal pressure is like on your setup?. Thanks Y'all
David KEMENESI It's really nice, I've ran a spec, it was suuuuper stiff- and the LS7 I had was like buuuuutter, this one isn't as easy as the LS7 but I really like the drive ability for how strong it is!!
Flying Sparks Garage I forgot to mention I'm running a TVS 1900 setup on my car making a little over 500 at the wheels would y'alls clutch hold that power level cuz I may go e85 down the road and see if I can make a bit more Hp.
David KEMENESI Yeah dude, Roxy put down 522 NA, that clutch is good to 1100tq anyway! It's hellaaaaa strawnggg 💪🏼💪🏼💪🏼
Flying Sparks Garage Awesome thanks for your time love the channel keep up the good work 👊✌
Hi young lady, fyi I have heard that when you are welding don not wear cantacts as they will stick to your eye. Love your videos. You and yours be safe. Peace.
can i just copy and paste this girl into my life??
Me too
Make some extras.
Must pay for original, no copies lol ;)
Emily looks good🤓
Do you have any negative camber issues from the rear?
I have Pedders track 2 kit with the 2inch drop- it took some adjustment to get my camber evened out where my tires wore evenly but she's been good since! It's been....like....7 years!!
+Zo6LS7427 The Holden IRS system is renowned in Aus for being a pain to lower and keep decent alignment. It throws Camber, caster & toe out just in general travel. Let alone when you lower it.
Name of all songs please
Working with the company ?? How so ??
How much $ for clutch and what up rating? Had rubber doughnut and carrier bearing eliminated with one piece driveshaft but will increase yoke angle and frt & rear ujoint wear. If the shit Don't stink don't stir it! If you do go big with aluminum shaft. Love to hear an Aussie pronounce (Aluminum), Aye.
fucking love that box
why work so high lower the lift to help with disassembly
nice video
Where exactly have you been my whole life?
You just built a top fuel or funny car 2 disk set up an a 3rd disk an hang on mamma an one piece driveshaft an that gto rearend will fit the z car alot stronger
What brand is your starter?
Quickest CZcams response ever? Phone was in my hand... Lol! Almost as fast as my starter cracks off... It's a TCI!
sonic tools should sponsor you!! i was thinking of picking up a full cart like your size. but i think ive seen you and your husband using them i might just pull the trigger on a set. are you guys happy with them?
Ryan Hooper They are a partner company! Those guys are awesome, the tools are badass and while I haven't broken one yet- all you have to do is send them a pic of your busted tool and they ship you out a new one! 👊🏼 I certainly suggest them!! 😎
I was thinking the same thing. It looks like you have the S10 box. There are a bunch of different options to load that up. Which one did you choose?
Ryan Hooper Yes, I have the S10!
Ryan Hooper Hey dude, e-mail my buddy Justin at justin@sonictoolsusa.com and he'll hook you up with a discount!! 💥💪🏼
dang you guys are awsome i am going to email him next week and buy a set,! you guys have me sold. keep up the videos!
was it just me or was there hardly any volume?
No, its from Advanced Clutch Technology. I just hop I don't get any crazy chatter. Does yours chatter?
When my clutch is in, I hear it a slight bit but I wouldn't call it chatter! It's very quiet.
What wheels are those and where can I find a set
They are AZA Z1's and sadly, they are no longer in production and pretty hard to find!!
Nice. I'm purchasing a supercharger 06 gto as I message uou. Isn't that cool. Your a part of my history
How much was the clutch
+James Lucas That is AWESOME, MAN!
The clutch is around $1800.
Looking for info on clutches and found this. Emily... oh my gosh..... what kind of clutch was that again.... Never mind. I'll just replay some of those close ups of Emily. Sorry to sound sexist.... but...mmmmmm ok back to reality.... or not... So impressed with you Emily..... Best thing about cars... the car people you get to meet, or in this case, watch.
She would have responded, but a married women would pass. Jeez man, come on..
can y'all text me? I'd like to ask about your LS build and what all you did to your car
Love it. What trans is that?
My stock T56!
@@flyingsparksgarage 2 cool! Im saving for one to go in my 84 Camaro
this video helped as much as trying to do it blind fold
Hunter Warren Nowhere in my title or description does this video imply 'how to' - Not going to find that here.
Flying Sparks Garage good point
Flying Sparks Garage isnt a "How-To" show as mich as its a "Watch-me" show! ;)
You need to get rid of that 2 piece driveshaft :)
I bought the same clutch to fit into my LS2 swapped in a '70 Z28 Camaro about 2 years ago and its still in its good looking suitcase, I feel shame to hide its beauty in that ugly bellhousing!. Have you noticed any reduction on the pedal effort?, it should be lighter than stock as per what they say.
Groupwar NA It's been so long since I've ran the stocker, I barely remember the feel! Lol! It's an easy clutch, but probably not easier than stock? Once it's broken in, after 500 miles or so- the pedal is like buttah!! I understand keeping it in the case though!! Haha!
Thanks Emily for the info, I need to dig for it in my garage and start the install. Please keep going with your videos, very informative and amusing.
Can u supply clutch in malaysia
Email to jacuslo.vortexperformance@yahoo.com They should be able to help. Here's the manufacturer's website mantic.com.au/
i was trying to work that car out, thought was a holden
Yep! Monaro!
You're funny Em. The other out. Lol
I’m looking for a new clutch rn
This one has been excellent for me! Put the same one in our Datsun, too. 👌🏼
@@flyingsparksgarage nice, definitely gonna look into it. Do you know what throw out bearing is on the GTO?
@@faviang9101 we just ordered it from Tick Performance…
Nice..
Not to be that guy....but safety glasses are your friend, especially working under the car.
yffrules, ditto!
i agree that moment you get rust in ur eyes you will know at that point you fucked up
Emily is flirting with the camera sooooooo badly. Why am I jealous of the camera? LOL
do you get everything for free?
Nothing is really free... even if you don't pay for it like everyone else... 😂 Calculating the time and money I spend earning the parts, it'd be cheaper to just buy it like everyone else. 😅🙈
This is for the girl with love, sniff sniff
Carrier bearing? Naah instant tailshaft whip.
I notice you always do bolts up in sequence. Undo them the same. I have seen clutchs warp undoing them like you did. And shudder and not disengage properly after.
woo
you need a good 1 piece driveshaft !!!!!!
Is Roxy Australian????? Please tell me about this car!!!!
Did she just do a clutch job with a 3/8 ratchet and a 12mm socket
I have looked into the mantic clutches for awhile and while they look nice and everything i think they are way over priced. if you have the extra to spend then why not i guess.
Give this galllll a 12 volt mini dewalt impact-
Where's your safety glasses?
God exists!!!!!
She is too much more beautiful