Customizing My Nintendo Switch Joy-Cons | Extremerate shell swap
Vložit
- čas přidán 8. 09. 2024
- Product Links:
Extremerate JoyCon Strap Shell - amzn.to/3tnZ4KQ
Extremerate JoyCon Shell - amzn.to/3tmE3Aa
Extremerate Replacement Buttons - amzn.to/36iTujY
Replacement Buttons - tinyurl.com/2p...
Play Vital Thumb Grips - amzn.to/3KWhsAk
Paw Thumb Grips - tinyurl.com/8f...
Peach Thumb Grips - amzn.to/3IsIXjc
Pink Switch Screen Protector + Case - amzn.to/3ql3Q9M
Check out the links below to stay connected to us!
Website: www.dreamycraft...
Instagram: / dreamycraftshop
Instagram: / kitty.goes.meow
Twitter: / dreamycraftshop
Business Enquiries: partnerships@dreamycraftshop.com
I'm sure if I did this my joycons would never work the same again but yours are so cute! Nice video.
I just did this last month, you don’t need to trust me on this but it was quite simple and intuitive.
Yeah it's really not that hard. With a simple tutorial video, You can do these Joy-Cons easily! Usually after watching a video I end up just being able to do it naturally
Fun fact you can download some software on a computer and change the colors the joycons display on the switch. So like when you connect them it can show pink instead of the original grey
Cool!
That’s so cool and extra I love it! I’ve never thought of hacking my switch until now…😂
@@mad_hatt you don't need to hack the switch just connect the joycons to your PC and open the software and change the color
@@Cloverthecat what’s the software called?
@@Krod349 i forgot, also you caj connect the joycons trough bluetooth
I love the way they're matching with your nails🥰
Same
This video is very cute and pretty good!! But I saw a couple things that if you want to do this yourself might cause some problems: first, this is a little silly and maybe doesn’t matter that much but this video started with the right joycon, but the extremerate instructions will always start with the left. There’s a reason! The right is a lot harder than the left because it has more parts. So, esp if you’ve never done it before, it’s much easier to do the left first. But overall my main point here is that it’s NOT the same on both joycons, these were instructions for the right but the left is a bit different. Esp if you’ve never done it before, I do recommend using ExtremeRate’s videos and instructions first (or instead).
Next, after pulling out the battery (around 5:44) she should have pulled that wire antenna thing out too instead of leaving it in the middle plastic piece and yanking it out. It looks like it happened to disconnect ok anyway on hers, but that could have damaged the motherboard. That antenna is only in the right joycon. Best thing to do is to gently pull it up right after pulling the battery out so that the chip and wire aren’t slotted into the plastic housing and THEN unscrew and pull out the middle plastic piece. You don’t have to detach that antenna at all, and I definitely wouldn’t do it the way it’s done in the video.
Another thing, also important because you could damage your joycon: around 7:50, the piece that holds in the ribbon (the clamp) isn’t always the lighter side (sometimes it’s silver, sometimes it’s black) and it also isn’t always on the side the ribbon slides into. On the last ribbon she said to unclamp, she was picking roughly at the wrong side of the ribbon when the clamp was the black piece on the other side, please don’t do that as you could again damage the mother board!
Also I kind of wish she had shown a bit more of removing the motherboard because that can be difficult on the right side as there are pieces under the mother board that she didn’t show that you need to transfer, even this little black circle that looks like it doesn’t do anything - but it goes around your joystick, and helps keep dirt out to prevent drift, so you need it! But you have to unstick it and pull it out to move it to the new shell.
Last thing, and this is pretty minor, but technically around 10:10 she clipped off more than she should have on the SR or SL button. The big tab was correct to take off, but the SR and SL also only fit in one orientation (to make sure you put them in facing the correct way) and she also clipped off the tiny tabs that help do that so I think the button was in upside down (or the L and R were swapped). No big but if you don’t know that you might make the same mistake, and some of the buttons are not solid colors but rather painted/coated so clipping where you shouldn’t can lead to chipped paint etc.
Overall though cute video!! These are difficult to do if you haven’t done many. If you want to do this yourself but are confused please feel free to reply or message me! I just did a few sets myself and even added extremerate’s light up buttons to my sets and love how they came out :)
Oh oh one more - almost forgot haha but around 4:26, while there is the space for a second screw, yes, I have never opened a set of joycons with both sides of the tail screwed in! They always only screw in the top, idk why.
Damn this long 😭💕
This video game me the confidence to replace my joycon shells! Replace the left one went smooth, however, the right one had a damaged screw, and while trying to force the joycon open, I ended up tearing the flex closer to the SL button.
I know the pain it's like tearing a muscle
Wow I didn’t realise how intricate taking them apart and putting them together was! I just bought new shells so I’m going to try this too! Helpful video 😊
AHHHHHHHH LOVED THE VIDEO! 💞this makes me want to change my joycons shell and buttons!!
If you are going to I have some tips! (I made these mistakes when she’ll and button swapping my joycons)
1. Make sure you have had a lot of sleep and are fully awake before swapping them! this will make you more conscious of what you’re doing
2. make sure when you put the new buttons in the shell that they are fully in! maybe hold down the circuit board and click the buttons a bit before reassembling your joycons!
3. Make sure you connect the slide bar in properly before reassembly, because they won’t lock into your switch if it’s not in properly.
4. Be very careful with the internals of the joycon, the cables are very delicate!
have fun customising them ✨
@@swizzleen I know this is not my comment, But thank you for the tips! :)
you didn't show how you removed it at 7:59. i was doing exactly what you did and broke off the part :/ it wasnt that side.. and i just got this switch too :(
Same. Now I have to buy a new one
I literally broke my joycon by following her instructions at this part of the video. That white part isn't supposed to come off and she shows on video her prying at it with the tweezer to "pop it open". It doesn't pop open. The black part at the other side is what pops open. I popped off the whole white part and now its broken. This tutorial sucks and should be removed.
theres a whole extra piece of the joycon that the ribbon cable is connected to (7:50) that you just don't show removing
Came for the video, stayed for the cute nails! XD
There are some corrections to be made though!
1) 7:47 THATS A BIG NO NO! you are damaging the connector itself, the white part. If that's damaged, you have to solder in another connector (good luck finding one and soldering it correctly). You have to just flip the black tab on top!
2) btw its not called a flex, its a ribbon cable.
3) Never use metal tweezers on the ribbon cable, use plastic ones since you can easily damage them - specially since you didn't remove the battery. Components can end up getting shorted and thats it, new joy-cons!
10:46 that is the rumble motor, and you are forgiven.
11:54 spring goes swooosh!
12:47 the springs are clearly not aligned properly! You have to re-do it!
14:09 you have tightened the bottom-right screw a lot, as a result it has damaged the plastic! If you take it apart by any change again, you might end up damaging the screw hole.
I just love how you did your custom and it's so cute, I love it. I hope that you make more videos like this one. :) I believe that I hope that you do more video's in the new year. :D
Hey awesome video! I’ve done this quite a few times now and I don’t know if you knew this or not but there is a little dust cover that goes on the joystick and in the video you discarded it, hope this is helpful!
Your voice is so relaxing!
Loved this video! Can you do an OLED switch Sanrio customization video?
Pretty sure the "white thing" is the rumble motor. I could be wrong tho.
Awesome video!! Keep up the great work I love your content!!!
Hiii new subs here! Omg omg that looks awesome ugh I’m scared to change mine I would rather pay you to customize my joycons! Cute videos!
Ah my favorite is watching your customize video is so much fun and comfortable😆😆😌😌🌷🌷🌈🌈❤💖
Soooo cute. They turned out nice :)
So cute! 💕
Thank you💗
Just wondering what kinda rhinestones do you use. I want to make a rhinestone case for my switch just like the ones you sell since they’re always sold out
Sama
I would be so scareddddd to do all this :0
Great video! Nice job on this!
she so Kawaii she even removed the actual plates of the Joycons itself
Ohhhhh I wanted these so bad I was looking at them but I can’t decide between white or this pink
The Kuromi tray did you make that???
WOW so cuuuutttteeee
I just bought a new shells for my joycons but now I’m kind of concerned to be able to do all this
looks great! i wouldn’t be able to do this lol. Can i pay someone to do it for me?
i wanna do this to my joycons but its so complicated '😭😭
the first ribbon you showed us to take out but was no clip also didnt show us how to take it on and put on it the other shell. when you put together the shell back in it was already clipped back in you could of broken ppl joycon and made ppl do twice the work cause they now have to take out the brains and put the cable back in cause its no way your going to put it back in when its together
I feel like I’m watching surgery
Same
Hello! Waiting here to watch... two minutes to go...
Thank you for stopping by for the premier 💗
Where did you get these buttons from??
Links are in the description box 💗
Oh I’m not sure why but they’re not showing up for me
Oh no! I spent all that time adding the links but it didn’t save. I just re added everything 💗
Wait so they now include the joycon release buttons?
hi
Can you give me this switch please
Hi!! 3rd comment?
Jesus is my savior he died on the cross for us and rose from the dead 3 days later ✝️ 🙏 ❤ God and Jesus will always be good
Amen hallelujah