HOW TO: Check EVO X Timing Chain
Vložit
- čas přidán 27. 08. 2024
- In today's video I check the tension on my EVO X timing chain. With an unknown history and it being a common failure I decide to check if it's been done.
Visit our store here
teespring.com/...
Follow us on Instagram here
/ drivedev
Nice video, very informative, close to 800 subs 🤗!
Hey man. I know this video was posted for a while now. Just wanna ask if replacing the tensioner resolved the rattling sound or you replaced the chain(whole kit) as well?
That was the question I was going to ask. My sons 13’ evo 10 is making that sound also, and he needs it fixed right away
To get to the tensioner takes a fair bit of work. You need to replace the chain to the updated one and the tensioner plus chain guides. Took me 6 hours to do on my drive.
Thanks for the info
Can't wait to see you getting stuck into this beast!
Normally if oil change regualy it prevents chain from stretching so much! Well it does on Honda k series engines!
It's common on these cars for the earlier ones to stretch at 50k. I'll get it done soon to be safe
Thanks for this man. I'm about to attempt this today (up Scotland) is there anything you missed out on the video I should beware of? My mate insists that we do An oil change at the same time but I don't see the point if the chain is gonna come off on Monday...
Thanks for the vid
@@jamiewalker8772 glad you liked vid. to remove the chain you have to drop the sump so an oil change would be done then anyway I'd have thought. My car will be getting it done soon as my garage is finished and I'll make videos on it too. Its parked up and Sorn for now but I'd not risk driving it as it is too slack
@@rowanlewisuk did you do a video on this in the end I dont see it in the list. Also is there a good way to see of you have the upgraded chain or not?
@@Austinob not sure if you ever found the info you were looking for; but any model from 2012 up has the upgrades chain
Anyone knows how I can debug if sound is coming from there ?
Would it sound more under load or on idle too ? When revving it ? How to test before opening it ? I have a similar sound sometimes.
That slop can just be from cams on lobe new chain can do that just fyi
What year do u have
Did a new chain job cure the startup noise?
Turns out it was the firmware on my sst gearbox. I did a reteach and it stopped
Nice
You never explained how to tell if the timing belt is bad
Itachlazcano21 it shouldnt be floppy
Driveway Developments also how hard is it to change the timing chain and water pump and all of thst
@@Itachlazcano21 Its an involved job. Took me 6 hours on my drive and 12 hours for the RTV to cure.
Me: *sweating cus I found a 2010 with 115k miles and have no idea if the chain has been done*
Haver whatsapp?